Re: kern/11018 (VIA VT83C572 UHCI USB controller does not work)

[Nick Hudson <skrll%netbsd.org@localhost>]

On 10/16/13 14:00, Izumi Tsutsui wrote:

so, we're getting closer to making your device work on uhci.
>   uhci_idone: ii=0x3df7e64, xfer=0x3df7dd0, pipe=0x3ecd788 ready
>   TD(0xba6740) at 00ba6740 = link=0x00ba6680 status=0x1c000007 token=0x00e0022d 
> buffer=0x00bdbf40
>     0xba6680> 0x1c000007<LS>,errcnt=3,actlen=8 
> pid=2d,addr=2,endpt=0,D=0,maxlen=8
>   TD(0xba6680) at 00ba6680 = link=0x00ba66b0 status=0x1c000007 token=0x00e80269 
> buffer=0x00bdbf00
>     0xba66b0> 0x1c000007<LS>,errcnt=3,actlen=8 
> pid=69,addr=2,endpt=0,D=1,maxlen=8
>   TD(0xba66b0) at 00ba66b0 = link=0x00ba66e0 status=0x1c000007 token=0x00e00269 
> buffer=0x00bdbf08
>     0xba66e0> 0x1c000007<LS>,errcnt=3,actlen=8 
> pid=69,addr=2,endpt=0,D=0,maxlen=8
>   TD(0xba66e0) at 00ba66e0 = link=0x00ba6710 status=0x1c8003ff token=0x00280269 
> buffer=0x00bdbf10
>     0xba6710> 0x1c8003ff<ACTIVE,LS>,errcnt=3,actlen=0 
> pid=69,addr=2,endpt=0,D=1,maxlen=2
Still active
>   TD(0xba6710) at 00ba6710 = link=0x00000001 status=0x1d0007ff token=0xffe802e1 
> buffer=0x00000000
>     0x1<T> 0x1d0007ff<IOC,LS>,errcnt=3,actlen=0 
> pid=e1,addr=2,endpt=0,D=1,maxlen=0

Not active... very odd.

Can you change uhci_debug to 16, add a call to uhci_dump in 
uhci_check_intr just before the

                /* If the last TD is not marked active we can complete */

comment and send the output, please?

Thanks,
Nick