Current-Users archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: Fnatic RUSH mechanical keyboard ignores keypress
On netbsd-7-0 and and netbsd-7-1 branches keyboard still work
properly, not on netbsd-7 and up though. I guess I will try to find
affecting pull-up. Currently don't see any clear candidate for
regression.
On Sat, Oct 5, 2019 at 4:49 PM Andrius V <vezhlys%gmail.com@localhost> wrote:
>
> Hi,
>
> Version seems to be irrelevant, since the keyboard stopped working on
> any NetBSD setup from 7.2 to the latest current branch based on my
> testing. Also it doesn't matter on which computer system it is
> attached (as well as if it is amd64 or i386 port). From the first
> glance, it would imply some hardware issue but the keyboard works fine
> with all the other operating systems (I tested Windows 10, Manjaro
> Linux, FreeBSD 12, OpenBSD 6.6 Beta). It worked well in NetBSD
> recently too... I don't believe that dmesg will show any relevant
> information since I don't see any changes, I guess some USB debugging
> may reveal more information? Nevertheless you can find dmesg below:
>
> NetBSD 9.0_BETA (GENERIC) #18: Tue Oct 1 22:31:00 EEST 2019
> andriusv@localhost:/home/andriusv/netbsd-src/sys/arch/amd64/compile/GENERIC
> total memory = 32719 MB
> avail memory = 31739 MB
> cpu_rng: RDSEED
> WARNING: ZFS on NetBSD is under development
> ZFS filesystem version: 5
> timecounter: Timecounters tick every 10.000 msec
> Kernelized RAIDframe activated
> running cgd selftest aes-xts-256 aes-xts-512 done
> timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
> BIOSTAR Group X370GT5 ( )
> mainbus0 (root)
> ACPI: RSDP 0x00000000000F05A0 000024 (v02 ALASKA)
> ACPI: XSDT 0x00000000DBFA80A0 0000C4 (v01 ALASKA A M I 01072009 AMI
> 00010013)
> ACPI: FACP 0x00000000DBFAD588 000114 (v06 ALASKA A M I 01072009 AMI
> 00010013)
> ACPI: DSDT 0x00000000DBFA8200 005386 (v02 ALASKA A M I 01072009
> INTL 20120913)
> ACPI: FACS 0x00000000DC044E00 000040
> ACPI: APIC 0x00000000DBFAD6A0 00015E (v03 ALASKA A M I 01072009 AMI
> 00010013)
> ACPI: FPDT 0x00000000DBFAD800 000044 (v01 ALASKA A M I 01072009 AMI
> 00010013)
> ACPI: FIDT 0x00000000DBFAD848 00009C (v01 ALASKA A M I 01072009 AMI
> 00010013)
> ACPI: SSDT 0x00000000DBFAD8E8 0000C8 (v02 ALASKA CPUSSDT 01072009 AMI
> 01072009)
> ACPI: SSDT 0x00000000DBFAD9B0 008C98 (v02 AMD AMD ALIB 00000002
> MSFT 04000000)
> ACPI: SSDT 0x00000000DBFB6648 003230 (v01 AMD AMD AOD 00000001
> INTL 20120913)
> ACPI: MCFG 0x00000000DBFB9878 00003C (v01 ALASKA A M I 01072009
> MSFT 00010013)
> ACPI: BHMB 0x00000000DBFB98B8 000474 (v01 ALASKA A M I 00000001 AMI
> 00000001)
> ACPI: HPET 0x00000000DBFB9D30 000038 (v01 ALASKA A M I 01072009 AMI
> 00000005)
> ACPI: SSDT 0x00000000DBFB9D68 000024 (v01 AMDFCH FCHZP 00001000
> INTL 20120913)
> ACPI: UEFI 0x00000000DBFB9D90 000042 (v01 ALASKA A M I 00000002
> 01000013)
> ACPI: TPM2 0x00000000DBFB9DD8 000038 (v04 ALASKA A M I 00000001 AMI
> 00000000)
> ACPI: IVRS 0x00000000DBFB9E10 0000D0 (v02 AMD AMD IVRS 00000001 AMD
> 00000000)
> ACPI: SSDT 0x00000000DBFB9EE0 001A58 (v01 AMD AMD CPU 00000001 AMD
> 00000001)
> ACPI: CRAT 0x00000000DBFBB938 000BD0 (v01 AMD AMD CRAT 00000001 AMD
> 00000001)
> ACPI: CDIT 0x00000000DBFBC508 000029 (v01 AMD AMD CDIT 00000001 AMD
> 00000001)
> ACPI: SSDT 0x00000000DBFBC538 001D4A (v01 AMD AmdTable 00000001
> INTL 20120913)
> ACPI: SSDT 0x00000000DBFBE288 0000BF (v01 AMD AMD PT 00001000
> INTL 20120913)
> ACPI: WSMT 0x00000000DBFBE348 000028 (v01 ALASKA A M I 01072009 AMI
> 00010013)
> ACPI: 8 ACPI AML tables successfully acquired and loaded
> ioapic0 at mainbus0 apid 13: pa 0xfec00000, version 0x21, 24 pins
> ioapic1 at mainbus0 apid 14: pa 0xfec01000, version 0x21, 32 pins
> cpu0 at mainbus0 apid 0
> cpu0: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
> cpu0: package 0, core 0, smt 0
> cpu1 at mainbus0 apid 2
> cpu1: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
> cpu1: package 0, core 1, smt 0
> cpu2 at mainbus0 apid 4
> cpu2: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
> cpu2: package 0, core 2, smt 0
> cpu3 at mainbus0 apid 8
> cpu3: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
> cpu3: package 0, core 4, smt 0
> cpu4 at mainbus0 apid 10
> cpu4: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
> cpu4: package 0, core 5, smt 0
> cpu5 at mainbus0 apid 12
> cpu5: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
> cpu5: package 0, core 6, smt 0
> cpu6 at mainbus0 apid 1
> cpu6: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
> cpu6: package 0, core 0, smt 1
> cpu7 at mainbus0 apid 3
> cpu7: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
> cpu7: package 0, core 1, smt 1
> cpu8 at mainbus0 apid 5
> cpu8: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
> cpu8: package 0, core 2, smt 1
> cpu9 at mainbus0 apid 9
> cpu9: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
> cpu9: package 0, core 4, smt 1
> cpu10 at mainbus0 apid 11
> cpu10: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
> cpu10: package 0, core 5, smt 1
> cpu11 at mainbus0 apid 13
> cpu11: AMD Ryzen 5 1600 Six-Core Processor , id 0x800f11
> cpu11: package 0, core 6, smt 1
> acpi0 at mainbus0: Intel ACPICA 20190405
> acpi0: X/RSDT: OemId <ALASKA, A M I ,01072009>, AslId <AMI ,00010013>
> acpi0: autoconfiguration error: invalid PCI address for D01E
> acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
> acpi0: SCI interrupting at int 9
> acpi0: fixed power button present
> timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
> hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
> timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
> AMDN (PNP0C01) at acpi0 not configured
> IOMA (PNP0C02) at acpi0 not configured
> APSP (PNP0C02) at acpi0 not configured
> attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
> pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
> spkr0 at pcppi1: PC Speaker
> wsbell at spkr0 not configured
> midi0 at pcppi1: PC speaker
> sysbeep0 at pcppi1
> SIO1 (PNP0C02) at acpi0 not configured
> pckbc1 at acpi0 (PS2K, PNP0303-0) (kbd port): io 0x60,0x64 irq 1
> UAR1 (PNP0501) at acpi0 not configured
> S900 (PNP0C02) at acpi0 not configured
> acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
> GPIO (AMDI0030) at acpi0 not configured
> TPM (MSFT0101) at acpi0 not configured
> AWR0 (PNP0C02) at acpi0 not configured
> ABR0 (PNP0C02) at acpi0 not configured
> ABR1 (PNP0C02) at acpi0 not configured
> ABR2 (PNP0C02) at acpi0 not configured
> ABR3 (PNP0C02) at acpi0 not configured
> ABR4 (PNP0C02) at acpi0 not configured
> ABR5 (PNP0C02) at acpi0 not configured
> ABR6 (PNP0C02) at acpi0 not configured
> ABR7 (PNP0C02) at acpi0 not configured
> AWR1 (PNP0C02) at acpi0 not configured
> ABR8 (PNP0C02) at acpi0 not configured
> ABR9 (PNP0C02) at acpi0 not configured
> ABRA (PNP0C02) at acpi0 not configured
> ABRB (PNP0C02) at acpi0 not configured
> ABRC (PNP0C02) at acpi0 not configured
> ABRD (PNP0C02) at acpi0 not configured
> ABRE (PNP0C02) at acpi0 not configured
> ABRF (PNP0C02) at acpi0 not configured
> PTIO (AMDIF030) at acpi0 not configured
> acpitz0 at acpi0 (THRM)
> acpitz0: levels: critical 127.0 C, passive cooling
> acpiwmi0 at acpi0 (AOD, PNP0C14-AOD): ACPI WMI Interface
> acpiwmibus at acpiwmi0 not configured
> ACPI: Enabled 1 GPEs in block 00 to 1F
> attimer1: attached to pcppi1
> pci0 at mainbus0 bus 0: configuration mode 1
> pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
> amdsmn0 at pci0 dev 0 function 0: AMD Family 17h System Management Network
> amdzentemp0 at amdsmn0: AMD CPU Temperature Sensors (Family17h)
> vendor 1022 product 1451 (IOMMU system) at pci0 dev 0 function 2 not configured
> pchb0 at pci0 dev 1 function 0: vendor 1022 product 1452 (rev. 0x00)
> ppb0 at pci0 dev 1 function 1: vendor 1022 product 1453 (rev. 0x00)
> ppb0: PCI Express capability version 2 <Root Port of PCI-E Root
> Complex> x4 @ 2.5GT/s
> pci1 at ppb0 bus 1
> pci1: i/o space, memory space enabled, rd/line, wr/inv ok
> xhci0 at pci1 dev 0 function 0: vendor 1022 product 43b9 (rev. 0x02)
> xhci0: interrupting at msi0 vec 0
> xhci0: xHCI version 1.10
> usb0 at xhci0: USB revision 3.1
> usb1 at xhci0: USB revision 2.0
> ahcisata0 at pci1 dev 0 function 1: vendor 1022 product 43b5 (rev. 0x02)
> ahcisata0: 64-bit DMA
> ahcisata0: AHCI revision 1.31, 8 ports, 32 slots, CAP
> 0xef36ff27<SXS,PSC,SSC,PMD,SPM,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SSNTF,SNCQ,S64A>
> ahcisata0: interrupting at msi1 vec 0
> atabus0 at ahcisata0 channel 0
> atabus1 at ahcisata0 channel 1
> atabus2 at ahcisata0 channel 2
> atabus3 at ahcisata0 channel 3
> atabus4 at ahcisata0 channel 4
> atabus5 at ahcisata0 channel 5
> atabus6 at ahcisata0 channel 6
> atabus7 at ahcisata0 channel 7
> ppb1 at pci1 dev 0 function 2: vendor 1022 product 43b0 (rev. 0x02)
> ppb1: PCI Express capability version 2 <Upstream Port of PCI-E Switch>
> pci2 at ppb1 bus 2
> pci2: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb2 at pci2 dev 0 function 0: vendor 1022 product 43b4 (rev. 0x02)
> ppb2: PCI Express capability version 2 <Downstream Port of PCI-E
> Switch> x1 @ 5.0GT/s
> ppb2: link is x1 @ 2.5GT/s
> pci3 at ppb2 bus 3
> pci3: i/o space, memory space enabled, rd/line, wr/inv ok
> re0 at pci3 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet
> (rev. 0x16)
> re0: interrupting at msix2 vec 0
> re0: Ethernet address xx:xx:xx:xx:xx:xx
> re0: using 256 tx descriptors
> rgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0
> rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
> ppb3 at pci2 dev 1 function 0: vendor 1022 product 43b4 (rev. 0x02)
> ppb3: PCI Express capability version 2 <Downstream Port of PCI-E
> Switch> x1 @ 5.0GT/s
> ppb3: link is x1 @ 2.5GT/s
> pci4 at ppb3 bus 4
> pci4: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb4 at pci4 dev 0 function 0: vendor 1b21 product 1080 (rev. 0x03)
> pci5 at ppb4 bus 5
> pci5: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb5 at pci2 dev 2 function 0: vendor 1022 product 43b4 (rev. 0x02)
> ppb5: PCI Express capability version 2 <Downstream Port of PCI-E
> Switch> x1 @ 5.0GT/s
> pci6 at ppb5 bus 6
> pci6: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb6 at pci2 dev 3 function 0: vendor 1022 product 43b4 (rev. 0x02)
> ppb6: PCI Express capability version 2 <Downstream Port of PCI-E
> Switch> x1 @ 5.0GT/s
> pci7 at ppb6 bus 7
> pci7: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb7 at pci2 dev 4 function 0: vendor 1022 product 43b4 (rev. 0x02)
> ppb7: PCI Express capability version 2 <Downstream Port of PCI-E
> Switch> x2 @ 5.0GT/s
> pci8 at ppb7 bus 8
> pci8: i/o space, memory space enabled, rd/line, wr/inv ok
> vendor 14e4 product 168e (ethernet network, revision 0x10) at pci8 dev
> 0 function 0 not configured
> vendor 14e4 product 168e (ethernet network, revision 0x10) at pci8 dev
> 0 function 1 not configured
> ppb8 at pci2 dev 6 function 0: vendor 1022 product 43b4 (rev. 0x02)
> ppb8: PCI Express capability version 2 <Downstream Port of PCI-E
> Switch> x1 @ 5.0GT/s
> pci9 at ppb8 bus 9
> pci9: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb9 at pci2 dev 7 function 0: vendor 1022 product 43b4 (rev. 0x02)
> ppb9: PCI Express capability version 2 <Downstream Port of PCI-E
> Switch> x1 @ 5.0GT/s
> ppb9: link is x1 @ 2.5GT/s
> pci10 at ppb9 bus 10
> pci10: i/o space, memory space enabled, rd/line, wr/inv ok
> athn0 at pci10 dev 0 function 0: Atheros AR9287
> athn0: rev 2 (2T2R), ROM rev 4, address xx:xx:xx:xx:xx:xx
> athn0: interrupting at ioapic1 pin 3
> athn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> athn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
> 24Mbps 36Mbps 48Mbps 54Mbps
> pchb1 at pci0 dev 2 function 0: vendor 1022 product 1452 (rev. 0x00)
> pchb2 at pci0 dev 3 function 0: vendor 1022 product 1452 (rev. 0x00)
> ppb10 at pci0 dev 3 function 1: vendor 1022 product 1453 (rev. 0x00)
> ppb10: PCI Express capability version 2 <Root Port of PCI-E Root
> Complex> x16 @ 8.0GT/s
> pci11 at ppb10 bus 11
> pci11: i/o space, memory space enabled, rd/line, wr/inv ok
> radeon0 at pci11 dev 0 function 0: vendor 1002 product 6811 (rev. 0x81)
> hdaudio0 at pci11 dev 0 function 1: HD Audio Controller
> hdaudio0: interrupting at msi3 vec 0
> hdafg0 at hdaudio0: vendor 1002 product aa01
> hdafg0: HDMI00 2ch: Digital Out [Jack]
> hdafg0: HDMI01 2ch: Digital Out [Jack]
> hdafg0: HDMI02 2ch: Digital Out [Jack]
> hdafg0: HDMI03 2ch: Digital Out [Jack]
> hdafg0: HDMI04 2ch: Digital Out [Jack]
> hdafg0: HDMI05 2ch: Digital Out [Jack]
> hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
> pchb3 at pci0 dev 4 function 0: vendor 1022 product 1452 (rev. 0x00)
> pchb4 at pci0 dev 7 function 0: vendor 1022 product 1452 (rev. 0x00)
> ppb11 at pci0 dev 7 function 1: vendor 1022 product 1454 (rev. 0x00)
> ppb11: PCI Express capability version 2 <Root Port of PCI-E Root
> Complex> x16 @ 8.0GT/s
> pci12 at ppb11 bus 12
> pci12: i/o space, memory space enabled, rd/line, wr/inv ok
> vendor 1022 product 145a (non-essential instrumentation, subclass
> 0x00) at pci12 dev 0 function 0 not configured
> vendor 1022 product 1456 (miscellaneous crypto) at pci12 dev 0
> function 2 not configured
> xhci1 at pci12 dev 0 function 3: vendor 1022 product 145c (rev. 0x00)
> xhci1: interrupting at msi4 vec 0
> xhci1: xHCI version 1.0
> usb2 at xhci1: USB revision 3.0
> usb3 at xhci1: USB revision 2.0
> pchb5 at pci0 dev 8 function 0: vendor 1022 product 1452 (rev. 0x00)
> ppb12 at pci0 dev 8 function 1: vendor 1022 product 1454 (rev. 0x00)
> ppb12: PCI Express capability version 2 <Root Port of PCI-E Root
> Complex> x16 @ 8.0GT/s
> pci13 at ppb12 bus 13
> pci13: i/o space, memory space enabled, rd/line, wr/inv ok
> vendor 1022 product 1455 (non-essential instrumentation, subclass
> 0x00) at pci13 dev 0 function 0 not configured
> ahcisata1 at pci13 dev 0 function 2: vendor 1022 product 7901 (rev. 0x51)
> ahcisata1: 64-bit DMA
> ahcisata1: AHCI revision 1.31, 8 ports, 32 slots, CAP
> 0xf737ff07<PSC,SSC,PMD,FBSS,SPM,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
> ahcisata1: interrupting at msi5 vec 0
> atabus8 at ahcisata1 channel 0
> atabus9 at ahcisata1 channel 1
> atabus10 at ahcisata1 channel 2
> atabus11 at ahcisata1 channel 3
> atabus12 at ahcisata1 channel 4
> atabus13 at ahcisata1 channel 5
> atabus14 at ahcisata1 channel 6
> atabus15 at ahcisata1 channel 7
> hdaudio1 at pci13 dev 0 function 3: HD Audio Controller
> hdaudio1: interrupting at msi6 vec 0
> hdafg1 at hdaudio1: vendor 10ec product 0892
> hdafg1: DAC00 8ch: Speaker [Jack]
> hdafg1: DAC01 2ch: HP Out [Jack]
> hdafg1: DIG02 2ch: SPDIF Out [Jack]
> hdafg1: ADC03 2ch: Line In [Jack], Mic In [Jack]
> hdafg1: ADC04 2ch: Mic In [Jack]
> hdafg1: 8ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16
> PCM20 PCM24 AC3
> audio0 at hdafg1: playback, capture, full duplex, independent
> audio0: slinear_le:16 8ch 48000Hz, blk 40ms for playback
> audio0: slinear_le:16 2ch 48000Hz, blk 40ms for recording
> spkr1 at audio0: PC Speaker (synthesized)
> wsbell at spkr1 not configured
> piixpm0 at pci0 dev 20 function 0: vendor 1022 product 790b (rev. 0x59)
> piixpm0: polling
> iic0 at piixpm0 port 0: I2C bus
> iic1 at piixpm0 port 1: I2C bus
> iic2 at piixpm0 port 2: I2C bus
> iic3 at piixpm0 port 3: I2C bus
> pcib0 at pci0 dev 20 function 3: vendor 1022 product 790e (rev. 0x51)
> pchb6 at pci0 dev 24 function 0: vendor 1022 product 1460 (rev. 0x00)
> pchb7 at pci0 dev 24 function 1: vendor 1022 product 1461 (rev. 0x00)
> pchb8 at pci0 dev 24 function 2: vendor 1022 product 1462 (rev. 0x00)
> pchb9 at pci0 dev 24 function 3: vendor 1022 product 1463 (rev. 0x00)
> pchb10 at pci0 dev 24 function 4: vendor 1022 product 1464 (rev. 0x00)
> pchb11 at pci0 dev 24 function 5: vendor 1022 product 1465 (rev. 0x00)
> pchb12 at pci0 dev 24 function 6: vendor 1022 product 1466 (rev. 0x00)
> pchb13 at pci0 dev 24 function 7: vendor 1022 product 1467 (rev. 0x00)
> isa0 at pcib0
> com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
> acpicpu0 at cpu0: ACPI CPU
> acpicpu0: C1: FFH, lat 1 us, pow 0 mW
> acpicpu0: C2: I/O, lat 400 us, pow 0 mW
> acpicpu0: P0: FFH, lat 1 us, pow 3960 mW, 3200 MHz
> acpicpu0: P1: FFH, lat 1 us, pow 2940 mW, 2800 MHz
> acpicpu0: P2: FFH, lat 1 us, pow 1350 mW, 1550 MHz
> acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
> acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
> acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
> acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
> acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
> acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
> acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
> acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
> acpicpu1 at cpu1: ACPI CPU
> acpicpu2 at cpu2: ACPI CPU
> acpicpu3 at cpu3: ACPI CPU
> acpicpu4 at cpu4: ACPI CPU
> acpicpu5 at cpu5: ACPI CPU
> acpicpu6 at cpu6: ACPI CPU
> acpicpu7 at cpu7: ACPI CPU
> acpicpu8 at cpu8: ACPI CPU
> acpicpu9 at cpu9: ACPI CPU
> acpicpu10 at cpu10: ACPI CPU
> acpicpu11 at cpu11: ACPI CPU
> timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
> autoconfiguration error: ERROR: 4400 cycle TSC drift observed
> uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev
> 3.00/1.00, addr 0
> uhub0: 8 ports with 8 removable, self powered
> uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev
> 2.00/1.00, addr 0
> uhub1: 14 ports with 14 removable, self powered
> uhub2 at usb2: NetBSD (0000) xHCI root hub (0000), class 9/0, rev
> 3.00/1.00, addr 0
> uhub2: 4 ports with 4 removable, self powered
> uhub3 at usb3: NetBSD (0000) xHCI root hub (0000), class 9/0, rev
> 2.00/1.00, addr 0
> uhub3: 4 ports with 4 removable, self powered
> IPsec: Initialized Security Association Processing.
> ahcisata0 port 0: device present, speed: 6.0Gb/s
> ahcisata0 port 4: device present, speed: 3.0Gb/s
> autoconfiguration error: ahcisata0 port 4: clearing WDCTL_RST failed
> for drive 15
> autoconfiguration error: ahcisata0 port 0: clearing WDCTL_RST failed
> for drive 15
> autoconfiguration error: ahcisata0 port 4: drive 15 reset failed, disabling PMP
> autoconfiguration error: ahcisata0 port 0: drive 15 reset failed, disabling PMP
> ahcisata0 port 4: device present, speed: 3.0Gb/s
> ahcisata0 port 0: device present, speed: 6.0Gb/s
> umass0 at uhub0 port 6 configuration 1 interface 0
> umass0: StoreJet Transcend (0x174c) StoreJet Transcend (0x5106), rev
> 3.00/80.00, addr 1
> umass0: using SCSI over Bulk-Only
> scsibus0 at umass0: 2 targets, 1 lun per target
> sd0 at scsibus0 target 0 lun 0: <StoreJet, Transcend, 0> disk fixed
> sd0: 238 GB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 500118192 sectors
> uhub4 at uhub1 port 5: vendor 05e3 (0x5e3) USB2.0 Hub (0x608), class
> 9/0, rev 2.00/32.98, addr 2
> uhub4: single transaction translator
> sd0: GPT GUID: aa426d16-0d0e-40a1-90e7-9a75f7b5c75f
> dk0 at sd0: "67b20926-002a-424f-a169-2c7efc563bb9", 614401 blocks at
> 4097, type: msdos
> dk1 at sd0: "5d7e40e5-4454-4a98-a81e-c5223d78f161", 421527550 blocks
> at 618498, type: ext2fs
> dk2 at sd0: "ed7d719c-6ef4-451f-9732-2e4dd981273b", 35925033 blocks at
> 464178417, type: <unknown>
> dk3 at sd0: "731c9349-02e0-471d-93db-99f63c06afe8", 42032369 blocks at
> 422146048, type: ffs
> uhub4: 4 ports with 4 removable, self powered
> ubt0 at uhub3 port 1
> ubt0: vendor 0a12 (0xa12) Bluetooth2.1+EDR CLASS1 (0x01), rev 2.00/52.76, addr 1
> wd0 at atabus0 drive 0
> wd0: <KINGSTON SKC400S37512G>
> wd0: drive supports 16-sector PIO transfers, LBA48 addressing
> wd0: 476 GB, 992277 cyl, 16 head, 63 sec, 512 bytes/sect x 1000215216 sectors
> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6
> (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
> wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6
> (Ultra/133) (using DMA), NCQ (31 tags)
> uhidev0 at uhub4 port 2 configuration 1 interface 0
> uhidev0: Fnatic Gear (0x195d) RUSH Mechanical Keyboard (0x2029), rev
> 2.00/1.09, addr 3, iclass 3/1
> ukbd0 at uhidev0: 8 Variable keys, 6 Array codes
> wskbd0 at ukbd0: console keyboard
> uhidev1 at uhub4 port 2 configuration 1 interface 1
> uhidev1: Fnatic Gear (0x195d) RUSH Mechanical Keyboard (0x2029), rev
> 2.00/1.09, addr 3, iclass 3/0
> uhid0 at uhidev1: input=4, output=0, feature=0
> uhidev2 at uhub4 port 3 configuration 1 interface 0
> uhidev2: Kensington (0x47d) Kensington USB/PS2 Orbit (0x1022), rev
> 1.10/4.00, addr 4, iclass 3/1
> ums0 at uhidev2: 2 buttons
> wsmouse0 at ums0 mux 0
> uhidev3 at uhub1 port 11 configuration 1 interface 0
> uhidev3: CASUE (0x2a7a) CASUE USB Keyboard (0x9a18), rev 1.10/0.01,
> addr 5, iclass 3/1
> ukbd1 at uhidev3: 8 Variable keys, 6 Array codes
> wskbd1 at ukbd1 mux 1
> uhidev4 at uhub1 port 11 configuration 1 interface 1
> uhidev4: CASUE (0x2a7a) CASUE USB Keyboard (0x9a18), rev 1.10/0.01,
> addr 5, iclass 3/0
> uhidev4: 2 report ids
> uhid1 at uhidev4 reportid 1: input=1, output=0, feature=0
> uhid2 at uhidev4 reportid 2: input=3, output=0, feature=0
> uhidev5 at uhub1 port 12 configuration 1 interface 0
> uhidev5: SteelSeries (0x1038) SteelSeries Rival 110 Gaming Mouse
> (0x1729), rev 1.10/0.34, addr 6, iclass 3/0
> uhid3 at uhidev5: input=32, output=32, feature=0
> uhidev6 at uhub1 port 12 configuration 1 interface 1
> uhidev6: SteelSeries (0x1038) SteelSeries Rival 110 Gaming Mouse
> (0x1729), rev 1.10/0.34, addr 6, iclass 3/1
> ums1 at uhidev6: 6 buttons and Z dir
> wsmouse1 at ums1 mux 0
> WARNING: 6 errors while detecting hardware; check system log.
> boot device: wd0
> root on wd0a dumps on wd0b
> /: replaying log to memory
> root file system type: ffs
> kern.module.path=/stand/amd64/9.0/modules
> kern info: [drm] initializing kernel modesetting (PITCAIRN
> 0x1002:0x6811 0x1458:0x2015).
> kern info: [drm] register mmio base: 0xfcf00000
> kern info: [drm] register mmio size: 262144
> kern info: ATOM BIOS: GV
> radeon0: info: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
> radeon0: info: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
> kern info: [drm] Detected VRAM RAM=800M, BAR=256M
> kern info: [drm] RAM width 256bits DDR
> Zone kernel: Available graphics memory: 11320654 kiB
> Zone dma32: Available graphics memory: 2097152 kiB
> kern info: [drm] radeon: 2048M of VRAM memory ready
> kern info: [drm] radeon: 2048M of GTT memory ready.
> kern info: [drm] Loading pitcairn Microcode
> kern info: [drm] radeon/PITCAIRN_mc2.bin: 31100 bytes
> kern info: [drm] Internal thermal controller with fan control
> kern info: [drm] radeon: dpm initialized
> kern info: [drm] GART: num cpu pages 524288, num gpu pages 524288
> kern info: [drm] PCIE GART of 2048M enabled (table at 0x0000000000277000).
> radeon0: info: WB enabled
> radeon0: info: fence driver on ring 0 use gpu addr 0x0000000080000c00
> and cpu addr 0x0xffffdec290e6cc00
> radeon0: info: fence driver on ring 1 use gpu addr 0x0000000080000c04
> and cpu addr 0x0xffffdec290e6cc04
> radeon0: info: fence driver on ring 2 use gpu addr 0x0000000080000c08
> and cpu addr 0x0xffffdec290e6cc08
> radeon0: info: fence driver on ring 3 use gpu addr 0x0000000080000c0c
> and cpu addr 0x0xffffdec290e6cc0c
> radeon0: info: fence driver on ring 4 use gpu addr 0x0000000080000c10
> and cpu addr 0x0xffffdec290e6cc10
> radeon0: info: fence driver on ring 5 use gpu addr 0x0000000000075a18
> and cpu addr 0x0xffffac025aeb5a18
> radeon0: autoconfiguration error: error: VCE init error (-22).
> kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> kern info: [drm] Driver supports precise vblank timestamp query.
> radeon0: info: radeon: MSI limited to 32-bit
> radeon0: interrupting at ioapic1 pin 30 (radeon0)
> kern info: [drm] radeon: irq initialized.
> kern info: [drm] ring test on 0 succeeded in 2 usecs
> kern info: [drm] ring test on 1 succeeded in 1 usecs
> kern info: [drm] ring test on 2 succeeded in 1 usecs
> kern info: [drm] ring test on 3 succeeded in 6 usecs
> kern info: [drm] ring test on 4 succeeded in 5 usecs
> kern info: [drm] ring test on 5 succeeded in 2 usecs
> kern info: [drm] UVD initialized successfully.
> kern info: [drm] ib test on ring 0 succeeded in 0 usecs
> kern info: [drm] ib test on ring 1 succeeded in 0 usecs
> kern info: [drm] ib test on ring 2 succeeded in 0 usecs
> kern info: [drm] ib test on ring 3 succeeded in 0 usecs
> kern info: [drm] ib test on ring 4 succeeded in 0 usecs
> kern info: [drm] ib test on ring 5 succeeded
> kern info: [drm] Radeon Display Connectors
> kern info: [drm] Connector 0:
> kern info: [drm] DP-1
> kern info: [drm] HPD4
> kern info: [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
> kern info: [drm] Encoders:
> kern info: [drm] DFP1: INTERNAL_UNIPHY2
> kern info: [drm] Connector 1:
> kern info: [drm] HDMI-A-1
> kern info: [drm] HPD5
> kern info: [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
> kern info: [drm] Encoders:
> kern info: [drm] DFP2: INTERNAL_UNIPHY2
> kern info: [drm] Connector 2:
> kern info: [drm] DVI-I-1
> kern info: [drm] HPD6
> kern info: [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
> kern info: [drm] Encoders:
> kern info: [drm] DFP3: INTERNAL_UNIPHY
> kern info: [drm] CRT1: INTERNAL_KLDSCP_DAC1
> kern info: [drm] Connector 3:
> kern info: [drm] DVI-D-1
> kern info: [drm] HPD1
> kern info: [drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
> kern info: [drm] Encoders:
> kern info: [drm] DFP4: INTERNAL_UNIPHY1
> radeondrmkmsfb0 at radeon0
> radeondrmkmsfb0: framebuffer at 0xffffac025b8fc000, size 1920x1080,
> depth 32, stride 7680
> wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100
> emulation), using wskbd0
> wsmux1: connecting to wsdisplay0
> wskbd1: connecting to wsdisplay0
> /: replaying log to disk
> /usr: replaying log to disk
> wsdisplay0: screen 1 added (default, vt100 emulation)
> wsdisplay0: screen 2 added (default, vt100 emulation)
> wsdisplay0: screen 3 added (default, vt100 emulation)
> wsdisplay0: screen 4 added (default, vt100 emulation)
> /home: replaying log to disk
>
> On Sat, Oct 5, 2019 at 5:51 AM Jonathan A. Kollasch
> <jakllsch%kollasch.net@localhost> wrote:
> >
> > On Sat, Oct 05, 2019 at 12:02:38AM +0300, Andrius V wrote:
> > > Hello,
> > >
> > > Recently (around a week ago) I faced an issue with my mechanical
> > > keyboard (Fnatic Gear Rush) that it doesn't react to any keypress
> > > anymore (in general I can't use it as a keyboard). Weirdly enough this
> > > issue is present in any NetBSD setup (tested netbsd-9, current and
> > > even older 8.1 setup which definitely worked before). It powers up, it
> > > is visible in dmesg, its USB hub works (mouse connected to it works
> > > without issues), Num/Caps Lock LED light reacts, if I click it on
> > > other attached keyboard, but pressing any button has no effect. Other
> > > non-mechanical "cheap" USB keyboards work without issues. Initially, I
> > > though it may be related to my recent UEFI update but it fails to work
> > > on other systems too. The original system is Ryzen 5 1600 based on
> > > Biostar x370gt5 motherboard. The keyboard itself is definitely fine
> > > and perfectly works on any other operating system I have (Manjaro,
> > > Windows 10), including UEFI/BIOS interface. Any ideas what may be
> > > causing this weird behavior? Thank you.
> > >
> > > from dmesg:
> > > uhidev0: Fnatic Gear (0x195d) RUSH Mechanical Keyboard (0x2029), rev
> > > 2.00/1.09, addr 8, iclass 3/1
> > >
> >
> > What version of NetBSD?
> >
> > More dmesg context would be useful too.
> >
> > Jonathan Kollasch
Home |
Main Index |
Thread Index |
Old Index