X11 failure on ThinkPad W500

[Christoph Badura <bad%bsd.de@localhost>]

I've tried yesterdays amd64 -current (201903251120Z) on my W500.

When I run startx I get weird gfx behaviour and a GPU HANG and reset.

The last -current I tried was from the end of January 2018 and X worked.

The xorg.conf is the one produced by X --configure.
There's no .xinitrc or similar configured.

Just running /usr/X11R7/bin/X initialises the display with the grey
background and I see no additional output in dmesg.  But the cursor
doesn't move when I move the trackpoint.

Running startx initialises the black background quickly.  Then I see some
white lines along the left of the upper edge and the upper half of the
left edge of the display.  I also see the GPU reset and following output
in dmesg.  After a while (several seconds) the white border rectangle of
the first xterm window is rendered along with a white rectangle in the
upper left corner the size of the xterm cursor.  The X pointer has changed
to the one used by xterm but sits in the middle of the screen and doesn't
move when I move the trackpoint.

I see twm, xclock, and 3 xterms in the process list.  The system is
completely idle.

After switching to ttyE0 and back, the first xterm (the tall one on the
left) is rendered albeit with a solid black titlebar.  the lower xterm
window is xterm window is rendered too.  the pointer is still unresponsive
and typing on the keyboard doesn't show in the xterm window.

After the next VT switch the xclock window is rendered and the X pointer
becomes responsive.

On the next VT switch nothing new is rendered but the pointer becomes
unresponsive.  Another VT switch doesn't change the situation.

After anothe VT switch the third xterm window is rendered.  The first and
the third xterm window show the previous keuboard input.  Also the title
bars have the text title, the solid circle at the left (but not the square
around it) and the inner part of the green resize button without the
bounding square.  The pointer is still unresponsive.

After typing this in the title bars of the first and third xterm have
become the usual green.

After a couple of more VT switches all the xterm windows are rendered.
But I get twm-green columns running down the left and right of the screen.
I didn't see that yesterday.  The X pointer is still unresponsive.

I did get the following in dmesg:
warning: ../../../../external/bsd/drm2/dist/drm/drm_irq.c:1510: vblank wait timed out on crtc 1

After several more VT switches I all the windows are rendered.  Pointer
and keyboard are responsive.  I can start and kill glxgears.  It runs at
pretty much 60 FPS.

Exiting from the large xterm kills the X server as expected.

All the time the console frame buffer worked as expected.

--chris

dmesg from startx:

(Note the repeated "[  32.1116383] acpibat0: no" after the "kern error".)
I have truncated the repeating numbers after the first 20.  Initially I
got some 1900 of them.  There are lost more printed after some but not all
of the VT switches.

[  32.1116383] acpibat0: normal capacity on 'charge state'
[ 2962.3329953] kern info: [drm] stuck on render ring
[ 2962.3329953] kern info: [drm] GPU HANG: ecode 4:0:0xffffffff, reason: Ring hung, action: reset
[ 2962.3329953] kern info: [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
[ 2962.3329953] kern info: [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
[ 2962.3329953] kern info: [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
[ 2962.3329953] kern info: [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
[ 2962.3329953] kern info: [drm] GPU crash dump saved to /sys/class/drm/card0/error
[ 2962.3329953] render error detected, EIR: 0x00000010
[ 2962.3329953]   IPEIR: 0x00000000
[ 2962.3329953]   IPEHR: 0x00000000
[ 2962.3329953]   INSTDONE_0: 0xffffffff
[ 2962.3329953]   INSTDONE_1: 0xbfffffff
[ 2962.3329953]   INSTDONE_2: 0x00000000
[ 2962.3329953]   INSTDONE_3: 0x00000000
[ 2962.3329953]   INSTPS: 0x8001e020
[ 2962.3329953]   ACTHD: 0x20000000
[ 2962.3329953] page table error
[ 2962.3329953]   PGTBL_ER: 0x00100000
[ 2962.3329953] kern error: [drm:(../../../../external/bsd/drm2/dist/drm/i915/i915_irq.c:2629)i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[  32.1116383] acpibat0: noesetting chip after gpu hang
[ 2962.3329953] 00015784 :  00000000
[ 2962.3329953] 00015788 :  00000273
[ 2962.3329953] 0001578c :  00000000
[ 2962.3329953] 00015790 :  00000274
[ 2962.3329953] 00015794 :  00000000
[ 2962.3329953] 00015798 :  00000261
[ 2962.3329953] 0001579c :  00000000
[ 2962.3329953] 000157a0 :  0000026e
[ 2962.3329953] 000157a4 :  00000000
[ 2962.3329953] 000157a8 :  00000264
[ 2962.3329953] 000157ac :  00000000
[ 2962.3329953] 000157b0 :  0000022f
[ 2962.3329953] 000157b4 :  00000000
[ 2962.3329953] 000157b8 :  00000261
[ 2962.3329953] 000157bc :  00000000
[ 2962.3329953] 000157c0 :  0000026d
[ 2962.3329953] 000157c4 :  00000000
[ 2962.3329953] 000157c8 :  00000264
[ 2962.3329953] 000157cc :  00000000
[ 2962.3329953] 000157d0 :  00000236

dmesg.boot after power on:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California.  All rights reserved.

NetBSD 8.99.36 (GENERIC) #4: Tue Mar 26 16:30:41 MET 2019
	bad@size-isnt-everything:/u/4/trees/src/current/sys/arch/amd64/compile/GENERIC
total memory = 3990 MB
avail memory = 3848 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO 4063VA5 (ThinkPad W500)
mainbus0 (root)
ACPI: RSDP 0x00000000000F6440 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000BD949B3A 00009C (v01 LENOVO TP-6F    00003230  LTP 00000000)
ACPI: FACP 0x00000000BD949C00 0000F4 (v03 LENOVO TP-6F    00003230 LNVO 00000001)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20181213/tbfadt-642)
Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20181213/tbfadt-745)
ACPI: DSDT 0x00000000BD94A00E 00FB01 (v01 LENOVO TP-6F    00003230 MSFT 03000000)
ACPI: FACS 0x00000000BD98E000 000040
ACPI: SSDT 0x00000000BD949DB4 00025A (v01 LENOVO TP-6F    00003230 MSFT 03000000)
ACPI: ECDT 0x00000000BD959B0F 000052 (v01 LENOVO TP-6F    00003230 LNVO 00000001)
ACPI: APIC 0x00000000BD959B61 000078 (v01 LENOVO TP-6F    00003230 LNVO 00000001)
ACPI: MCFG 0x00000000BD959BD9 00003C (v01 LENOVO TP-6F    00003230 LNVO 00000001)
ACPI: HPET 0x00000000BD959C15 000038 (v01 LENOVO TP-6F    00003230 LNVO 00000001)
ACPI: SLIC 0x00000000BD959DC2 000176 (v01 LENOVO TP-6F    00003230  LTP 00000000)
ACPI: BOOT 0x00000000BD959F38 000028 (v01 LENOVO TP-6F    00003230  LTP 00000001)
ACPI: ASF! 0x00000000BD959F60 0000A0 (v16 LENOVO TP-6F    00003230 PTL  00000001)
ACPI: SSDT 0x00000000BD98D1FA 000568 (v01 LENOVO TP-6F    00003230 INTL 20050513)
ACPI: TCPA 0x00000000BD707000 000032 (v00                 00000000      00000000)
ACPI: DMAR 0x00000000BD706000 000120 (v01        ?        00000001      00000000)
ACPI: SSDT 0x00000000BD6D3000 000655 (v01 PmRef  CpuPm    00003000 INTL 20050624)
ACPI: SSDT 0x00000000BD6D2000 000274 (v01 PmRef  Cpu0Tst  00003000 INTL 20050624)
ACPI: SSDT 0x00000000BD6D1000 000242 (v01 PmRef  ApTst    00003000 INTL 20050624)
ACPI: 6 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM)2 Duo CPU     P9600  @ 2.66GHz, id 0x1067a
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 1
cpu1: Intel(R) Core(TM)2 Duo CPU     P9600  @ 2.66GHz, id 0x1067a
cpu1: package 0, core 1, smt 0
acpi0 at mainbus0: Intel ACPICA 20181213
acpi0: X/RSDT: OemId <LENOVO,TP-6F   ,00003230>, AslId < LTP,00000000>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFEEF5A139D810 00030A (v01 PmRef  Cpu0Ist  00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFEEF5A13C0010 00087A (v01 PmRef  Cpu0Cst  00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFEEF5A13C8E10 0001CF (v01 PmRef  ApIst    00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFEEF5A13E8480 00008D (v01 PmRef  ApCst    00003000 INTL 20050624)
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
MEM (PNP0C01) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
SIO (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, IBM0057) (aux port): irq 12
UART (PNP0501) at acpi0 not configured
TPM (INTC0102) at acpi0 not configured
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
thinkpad0 at acpi0 (HKEY, IBM0068)
acpivga0 at acpi0 (VID): ACPI Display Adapter
acpiout0 at acpivga0 (LCD0, 0x0400): ACPI Display Output Device
acpiout0: brightness levels: [20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,100]
acpiout1 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device
acpiout2 at acpivga0 (DVI0, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DVI1, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DVI2, 0x0302): ACPI Display Output Device
acpivga0: autoconfiguration error: unknown output device acpiout1
acpivga0: autoconfiguration error: unknown output device acpiout2
acpivga0: autoconfiguration error: unknown output device acpiout3
acpivga0: autoconfiguration error: unknown output device acpiout4
acpivga0: connected output devices:
acpivga0:   0x0400 (acpiout0): Unknown Output Device, head 0
GDCK (IBM0079) at acpi0 not configured
acpiwmi0 at acpi0 (WMI1, PNP0C14-1): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpitz0 at acpi0 (THM0)
acpitz0: levels: critical 127.0 C, passive cooling
acpitz1 at acpi0 (THM1): cpu0 cpu1
acpitz1: levels: critical 100.0 C, passive 95.5 C, passive cooling
ACPI: Enabled 3 GPEs in block 00 to 3F
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 7.0
pms0: Passthrough, Palm detect
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 2a40 (rev. 0x07)
agp0 at pchb0: G4X-family chipset
agp0: detected 32252k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 2a42 (rev. 0x07)
vendor 8086 product 2a43 (miscellaneous display, revision 0x07) at pci0 dev 2 function 1 not configured
vendor 8086 product 2a44 (miscellaneous communications, revision 0x07) at pci0 dev 3 function 0 not configured
wm0 at pci0 dev 25 function 0: 82801I mobile (AMT) LAN Controller (rev. 0x03)
wm0: interrupting at msi0 vec 0
wm0: PCI-Express bus
wm0: 2048 words FLASH
wm0: Ethernet address 00:27:13:b1:43:52
wm0: 0x2a4480<FLASH,IOH_VALID,PCIE,ASF_FIRM,AMT,WOL>
makphy0 at wm0 phy 2: Marvell 88E1149 Gigabit PHY, rev. 1
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 26 function 0: vendor 8086 product 2937 (rev. 0x03)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 8086 product 2938 (rev. 0x03)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 26 function 2: vendor 8086 product 2939 (rev. 0x03)
uhci2: interrupting at ioapic0 pin 22
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 8086 product 293c (rev. 0x03)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: 3 companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi1 vec 0
hdafg0 at hdaudio0: vendor 14f1 product 5051
hdafg0: DAC00 2ch: HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack]
hdafg0: DAC02 2ch: Speaker [Built-In]
hdafg0: ADC03 2ch: Mic In [Built-In]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
hdafg0: Latency: 128 milliseconds
spkr1 at audio0: PC Speaker (synthesized)
wsbell at spkr1 not configured
hdvsmfg at hdaudio0 not configured
ppb0 at pci0 dev 28 function 0: vendor 8086 product 2940 (rev. 0x03)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 8086 product 2942 (rev. 0x03)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
iwn0 at pci2 dev 0 function 0: vendor 8086 product 4236 (rev. 0x00)
iwn0: interrupting at msi2 vec 0
iwn0: MIMO 3T3R, MoW, address 00:21:6a:ab:62:48
iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ppb2 at pci0 dev 28 function 3: vendor 8086 product 2946 (rev. 0x03)
ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 5
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 28 function 4: vendor 8086 product 2948 (rev. 0x03)
ppb3: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci4 at ppb3 bus 13
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
uhci3 at pci0 dev 29 function 0: vendor 8086 product 2934 (rev. 0x03)
uhci3: interrupting at ioapic0 pin 16
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 1: vendor 8086 product 2935 (rev. 0x03)
uhci4: interrupting at ioapic0 pin 17
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 2: vendor 8086 product 2936 (rev. 0x03)
uhci5: interrupting at ioapic0 pin 18
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 8086 product 293a (rev. 0x03)
ehci1: interrupting at ioapic0 pin 19
ehci1: EHCI version 1.0
ehci1: 3 companion controllers, 2 ports each: uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
ppb4 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0x93)
pci5 at ppb4 bus 21
pci5: i/o space, memory space enabled
cbb0 at pci5 dev 0 function 0: vendor 1180 product 0476 (rev. 0xba)
fwohci0 at pci5 dev 0 function 1: vendor 1180 product 0832 (rev. 0x04)
fwohci0: interrupting at ioapic0 pin 17
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:06:1b:03:2a:51:b7:67
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
fwohci0: Clear PME# now
sdhc0 at pci5 dev 0 function 2: vendor 1180 product 0822 (rev. 0x21)
sdhc0: interrupting at ioapic0 pin 18
sdhc0: SDHC 1.0, rev 4, SDMA, 33000 kHz, HS 3.3V, 512 byte blocks
sdmmc0 at sdhc0 slot 0
vendor 1180 product 0843 (miscellaneous system, revision 0x11) at pci5 dev 0 function 3 not configured
vendor 1180 product 0592 (miscellaneous system, revision 0x11) at pci5 dev 0 function 4 not configured
vendor 1180 product 0852 (miscellaneous system, revision 0x11) at pci5 dev 0 function 5 not configured
cbb0: cacheline 0x10 lattimer 0x20
cbb0: bhlc 0x822010
cbb0: interrupting at ioapic0 pin 16
cardslot0 at cbb0
cardbus0 at cardslot0: bus 22
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 2917 (rev. 0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 2929 (rev. 0x03)
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 4 ports, 32 slots, CAP 0xef20ffa3<SXS,CCCS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSS,SSNTF,SNCQ,S64A>
ahcisata0: interrupting at msi3 vec 0
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 2930 (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 23
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
acpicpu0: C2: FFH, lat   1 us, pow   500 mW
acpicpu0: C3: FFH, lat  57 us, pow   100 mW, bus master check
acpicpu0: P0: FFH, lat  10 us, pow 35000 mW, 2667 MHz, turbo boost
acpicpu0: P1: FFH, lat  10 us, pow 35000 mW, 2666 MHz
acpicpu0: P2: FFH, lat  10 us, pow 25000 mW, 2133 MHz
acpicpu0: P3: FFH, lat  10 us, pow 15000 mW, 1600 MHz
acpicpu0: P4: FFH, lat  10 us, pow 12000 mW,  800 MHz
acpicpu0: T0: FFH, lat   1 us, pow 12000 mW, 100 %
acpicpu0: T1: FFH, lat   1 us, pow 10500 mW,  88 %
acpicpu0: T2: FFH, lat   1 us, pow  9000 mW,  75 %
acpicpu0: T3: FFH, lat   1 us, pow  7500 mW,  63 %
acpicpu0: T4: FFH, lat   1 us, pow  6000 mW,  50 %
acpicpu0: T5: FFH, lat   1 us, pow  4500 mW,  38 %
acpicpu0: T6: FFH, lat   1 us, pow  3000 mW,  25 %
acpicpu0: T7: FFH, lat   1 us, pow  1500 mW,  13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
acpibat0: SANYO LION rechargeable battery
acpibat0: granularity: low->warn 0.001 Wh, warn->full 0.001 Wh
uhub0 at usb0: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4 at usb4: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb7: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub7: 6 ports with 6 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
ehci0: handing over full speed device on port 3 to uhci1
wd0 at atabus0 drive 0
wd0: <KINGSTON SV300S37A60G>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 57241 MB, 116301 cyl, 16 head, 63 sec, 512 bytes/sect x 117231408 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GU10N, M11A2JH1608, MX05> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
ehci0: handing over full speed device on port 4 to uhci1
ugen0 at uhub1 port 1
ugen0: vendor 08ff (0x8ff) Fingerprint Sensor (0x2810), rev 2.00/17.03, addr 2
uhub8 at uhub3 port 5: vendor 04b3 (0x4b3) product 4485 (0x4485), class 9/0, rev 2.00/0.01, addr 2
uhub8: multiple transaction translators
uhub8: 4 ports with 4 removable, self powered
WARNING: 4 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/8.99.36/modules
kern info: [drm] Memory usable by graphics device = 512M
kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
kern info: [drm] Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0)
intelfb0 at i915drmkms0
intelfb0: framebuffer at 0xffffcd006795c000, size 1920x1200, depth 32, stride 7680
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
ubt0 at uhub1 port 2
ubt0: Lenovo Computer Corp (0xa5c) ThinkPad Bluetooth with Enhanced Data Rate II (0x2145), rev 2.00/3.99, addr 3
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
acpibat0: normal capacity on 'charge state'