Re: Heads-up: RPI FDTisation committed

[Ryo ONODERA <ryo%tetera.org@localhost>]

Hi,

Thanks for your build.sh -m evbearmv6hf-el release fix.

I have written rpi.img to SD Card and boot it on
Raspberry Pi Model B Revision 2.0 (RAM: 512MB).
And I do not see any green boot message in HDMI display.
Older non-FDTised rpi.img boots properly on same setting.

Do I need to modify config.txt or cmdline.txt?
I have no changes in config.txt and cmdline.txt.

Thank you.

From: Nick Hudson <skrll%netbsd.org@localhost>, Date: Sun, 10 Dec 2017 21:38:55 +0000

> Today I've committed a bunch of changes to convert the BCM283[567]
> support in
> 
> sys/arch/arm/broadcom to use FDT[*]. It's not perfect, but its a good
> step in the right
> 
> direction.
> 
> 
> To the user there should be very little difference apart from
> 
> - the kernel is now built as netbsd.img (and not netbsd.bin) in the
> - kernel compile objdir.
> 
> - the *.dtb files from the kernel objdir need to be on the fat
> - filesystem
> 
> - support for dtb overlays should work[**]
> 
> 
> The images evbearmv6hf/rpi.img and evbearmv7hf/armv7.img have been
> tested on rpi1 model b, rpi2 and rpi3.
> 
> 
> Nick
> 
> 
> [*]
> https://github.com/devicetree-org/devicetree-specification-released/blob/master/devicetree-specification-v0.1-20160524.pdf
> 
> [**]
> https://www.raspberrypi.org/documentation/configuration/device-tree.md
> 

--
Ryo ONODERA // ryo%tetera.org@localhost
PGP fingerprint = 82A2 DC91 76E0 A10A 8ABB  FD1B F404 27FA C7D1 15F3