Re: cross-compiling ARM img question

[bch <brad.harder%gmail.com@localhost>]

On 11/26/17, bch <brad.harder%gmail.com@localhost> wrote:
> I've got an invocation like this, hoping to get an armv7 img to dd
> onto an SD card:
>
> $ nice ./build.sh  -j1 -u -U -R /home/bch/releasedir -O
> /home/bch/usr/obj_nanopi/ -m evbearmv7hf-el release
>
>
> But the build step is trying to install things to root (/boot/...). It
> seemed to me that the -R switch should have the release installed to
> the supplied dir. I've got nothing at all in
> /home/bch/releasedir/evbarm/binary/gzimg, though I've got sets built
> (/home/bch/releasedir/evbarm/binary/sets/*)
>
> What am I missing?


Turns out it was /tmp filling up. This wasn't indicated in the error
message, but running the mkimage via "sh -x" illuminated the issue.

-bch


> Here's the final output from the build.sh as indicated above:
>
> [...]
>
> release ===> etc/evbarm/cdroms
> release ===> etc/evbarm/cdroms/installcd
> /home/bch/usr/obj_nanopi/tooldir.NetBSD-8.99.7-amd64/bin/armv7--netbsdelf-eabihf-install
> -r -p -c -m 444
> /home/bch/usr/obj_nanopi/sys/arch/evbarm/stand/boot2440/bootmini2440
> /home/bch/releasedir/evbarm/installation
> TOOL_MAKE=/home/bch/usr/obj_nanopi/tooldir.NetBSD-8.99.7-amd64/bin/nbmake
> TOOL_MAKEFS=/home/bch/usr/obj_nanopi/tooldir.NetBSD-8.99.7-amd64/bin/nbmakefs
> TOOL_DISKLABEL=/home/bch/usr/obj_nanopi/tooldir.NetBSD-8.99.7-amd64/bin/nbdisklabel
> TOOL_FDISK=/home/bch/usr/obj_nanopi/tooldir.NetBSD-8.99.7-amd64/bin/armv7--netbsdelf-eabihf-fdisk
>  TOOL_GZIP=gzip
> TOOL_MKNOD=/home/bch/usr/obj_nanopi/tooldir.NetBSD-8.99.7-amd64/bin/nbmknod
>  TOOL_PAX=/home/bch/usr/obj_nanopi/tooldir.NetBSD-8.99.7-amd64/bin/nbpax
> TOOL_MKUBOOTIMAGE=/home/bch/usr/obj_nanopi/tooldir.NetBSD-8.99.7-amd64/bin/nbmkubootimage
> TOOL_MTREE=/home/bch/usr/obj_nanopi/tooldir.NetBSD-8.99.7-amd64/bin/nbmtree
>  HOST_SH=/bin/sh
> KERNOBJDIR=/home/bch/usr/obj_nanopi/sys/arch/evbarm/compile
> MACHINE=evbarm  /bin/sh /usr/src/distrib/utils/embedded/mkimage -x -h
> armv7 -D /home/bch/usr/obj_nanopi/destdir.evbarm  -S /usr/src -B le -K
> /home/bch/releasedir/evbarm/binary/kernel
> /home/bch/releasedir/evbarm/binary/gzimg/armv7.img.gz
> === configuring sets ===
> === running MAKEDEV ===
> === fixing up permissions
> === looking for kernels in /home/bch/releasedir/evbarm/binary/kernel ===
> === installing
> /home/bch/releasedir/evbarm/binary/kernel/netbsd-BEAGLEBOARD.ub.gz
> to /boot/netbsd-BEAGLEBOARD.ub ===
> === installing
> /home/bch/releasedir/evbarm/binary/kernel/netbsd-BEAGLEBONE.ub.gz
> to /boot/netbsd-BEAGLEBONE.ub ===
> === installing /home/bch/releasedir/evbarm/binary/kernel/netbsd-BPI.ub.gz
> to /boot/netbsd-BPI.ub ===
> === installing
> /home/bch/releasedir/evbarm/binary/kernel/netbsd-CUBIEBOARD.ub.gz
> to /boot/netbsd-CUBIEBOARD.ub ===
> === installing
> /home/bch/releasedir/evbarm/binary/kernel/netbsd-CUBIETRUCK.ub.gz
> to /boot/netbsd-CUBIETRUCK.ub ===
>
> /: write failed, file system is full
> gzip: error writing to output: No space left on device
> gzip: /home/bch/releasedir/evbarm/binary/kernel/netbsd-CUBIETRUCK.ub.gz:
> uncompress failed
> *** [smp_armv7] Error code 1
>
> nbmake[1]: stopped in /usr/src/etc
> 1 error
>
> nbmake[1]: stopped in /usr/src/etc
> *** [release] Error code 2
>
> nbmake: stopped in /usr/src
> 1 error
>
> nbmake: stopped in /usr/src
>
> ERROR: Failed to make release
> *** BUILD ABORTED ***
> ing inat though t I' got   sets builtr.r.r.
> kjhhkkkkjkjkjhhlhlhhhlhlhhkjkjllhxhh final  output
>