Possible regression in wm(4)?

To: current-users%netbsd.org@localhost
Subject: Possible regression in wm(4)?
From: Jimmy Johansson <jimmy%Update.UU.SE@localhost>
Date: Fri, 10 Nov 2017 20:23:21 +0100
Hello current users!

We've been trying to install both NetBSD 8 and NetBSD current on a
ProLiant DL170h G6 with Intel i82576 network interfaces.

Strangely we can set addresses on the interfaces, but we can't send or
receive any traffic.

We tried NetBSD 7 as well, where everything works as expected.

Has anybody else had issues with these interfaces in NetBSD 8 or NetBSD
current?

Parts of respective dmesg.boot files from NetBSD 7.1, current and the
whole dmesg.boot from a NetBSD current compiled today with debug
enabled pasted below.

Parts of dmesg from (working) NetBSD 7.1:

wm0 at pci1 dev 0 function 0: 82576 1000BaseT Ethernet (rev. 0x01)
wm0: interrupting at ioapic0 pin 16
wm0: PCI-Express bus
wm0: 8192 words (16 address bits) SPI EEPROM, version 1.82, Image Unique
ID dc120000
wm0: Ethernet address 00:24:81:e1:05:8a
wm0: Copper
igphy0 at wm0 phy 1: i82566 10/100/1000 media interface, rev. 1
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
wm1 at pci1 dev 0 function 1: 82576 1000BaseT Ethernet (rev. 0x01)
wm1: interrupting at ioapic0 pin 17
wm1: PCI-Express bus
wm1: 8192 words (16 address bits) SPI EEPROM, version 1.82, Image Unique
ID dc120000
wm1: Ethernet address 00:24:81:e1:05:8b
wm1: Copper
igphy1 at wm1 phy 1: i82566 10/100/1000 media interface, rev. 1
igphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto

Parts of dmesg from (non-working) NetBSD current:

wm0 at pci1 dev 0 function 0: 82576 1000BaseT Ethernet (rev. 0x01)
wm0: for TX and RX interrupting at msix0 vec 0 affinity to 0
wm0: for TX and RX interrupting at msix0 vec 1 affinity to 1
wm0: for TX and RX interrupting at msix0 vec 2 affinity to 2
wm0: for TX and RX interrupting at msix0 vec 3 affinity to 3
wm0: for TX and RX interrupting at msix0 vec 4 affinity to 4
wm0: for TX and RX interrupting at msix0 vec 5 affinity to 5
wm0: for TX and RX interrupting at msix0 vec 6 affinity to 6
wm0: for TX and RX interrupting at msix0 vec 7 affinity to 7
wm0: for LINK interrupting at msix0 vec 8
wm0: PCI-Express bus
wm0: 8192 words (16 address bits) SPI EEPROM, version 1.82, Image Unique
ID dc120000
wm0: Ethernet address 00:24:81:e1:05:8a
wm0: Copper
wm0: 0x74440<SPI,IOH_VALID,PCIE,NEWQUEUE,ASF_FIRM,ARC_SUBSYS>
igphy0 at wm0 phy 1: i82566 10/100/1000 media interface, rev. 1
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
wm1 at pci1 dev 0 function 1: 82576 1000BaseT Ethernet (rev. 0x01)
wm1: for TX and RX interrupting at msix1 vec 0 affinity to 0
wm1: for TX and RX interrupting at msix1 vec 1 affinity to 1
wm1: for TX and RX interrupting at msix1 vec 2 affinity to 2
wm1: for TX and RX interrupting at msix1 vec 3 affinity to 3
wm1: for TX and RX interrupting at msix1 vec 4 affinity to 4
wm1: for TX and RX interrupting at msix1 vec 5 affinity to 5
wm1: for TX and RX interrupting at msix1 vec 6 affinity to 6
wm1: for TX and RX interrupting at msix1 vec 7 affinity to 7
wm1: for LINK interrupting at msix1 vec 8
wm1: PCI-Express bus
wm1: 8192 words (16 address bits) SPI EEPROM, version 1.82, Image Unique
ID dc120000
wm1: Ethernet address 00:24:81:e1:05:8b
wm1: Copper
wm1: 0x74440<SPI,IOH_VALID,PCIE,NEWQUEUE,ASF_FIRM,ARC_SUBSYS>

Full dmesg from non-working NetBSD current with degug enabled kernel:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 8.99.6 (GENERIC.DEBUG) #0: Fri Nov 10 15:48:21 CET 2017
	root@noname:/netbsd-current/obj/sys/arch/amd64/compile/GENERIC.DEBUG
total memory = 24567 MB
avail memory = 23831 MB
rnd: seeded with 128 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
HP ProLiant DL170h G6   (                )
mainbus0 (root)
ACPI: RSDP 0x00000000000FA3B0 000024 (v02 HP    )
ACPI: XSDT 0x00000000BF780100 000094 (v01 HP     ProLiant 20101217 FOXC 00000097)
ACPI: FACP 0x00000000BF780290 0000F4 (v04 HP     ProLiant 20101217 FOXC 00000097)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20170831/tbfadt-642)
ACPI: DSDT 0x00000000BF780710 005F6B (v02 HP     ProLiant 00000034 INTL 20051117)
ACPI: FACS 0x00000000BF790000 000040
ACPI: APIC 0x00000000BF780390 000112 (v02 HP     ProLiant 20101217 FOXC 00000097)
ACPI: SPCR 0x00000000BF7804B0 000050 (v01 HP     ProLiant 20101217 FOXC 00000097)
ACPI: MCFG 0x00000000BF780500 00003C (v01 HP     ProLiant 20101217 FOXC 00000097)
ACPI: SPMI 0x00000000BF780540 000041 (v05 HP     ProLiant 20101217 FOXC 00000097)
ACPI: OEMB 0x00000000BF790040 00007A (v01 HP     ProLiant 20101217 FOXC 00000097)
ACPI: SRAT 0x00000000BF786680 000150 (v02 HP     ProLiant 00000001 FOXC 00000001)
ACPI: HPET 0x00000000BF7867D0 000038 (v01 HP     ProLiant 20101217 FOXC 00000097)
ACPI: DMAR 0x00000000BF7900C0 000060 (v01 HP     ProLiant 00000001 FOXC 00000097)
ACPI: SSDT 0x00000000BF7923D0 000355 (v01 HP     ProLiant 00000012 INTL 20051117)
ACPI: EINJ 0x00000000BF786810 000130 (v01 HP     ProLiant 20101217 FOXC 00000097)
ACPI: BERT 0x00000000BF7869A0 000030 (v01 HP     ProLiant 20101217 FOXC 00000097)
ACPI: ERST 0x00000000BF7869D0 0001B0 (v01 HP     ProLiant 20101217 FOXC 00000097)
ACPI: HEST 0x00000000BF786B80 0000A8 (v01 HP     ProLiant 20101217 FOXC 00000097)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: 2 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Xeon(R) CPU           E5520  @ 2.27GHz, id 0x106a5
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 16
cpu1: Intel(R) Xeon(R) CPU           E5520  @ 2.27GHz, id 0x106a5
cpu1: package 1, core 0, smt 0
cpu2 at mainbus0 apid 2
cpu2: Intel(R) Xeon(R) CPU           E5520  @ 2.27GHz, id 0x106a5
cpu2: package 0, core 1, smt 0
cpu3 at mainbus0 apid 18
cpu3: Intel(R) Xeon(R) CPU           E5520  @ 2.27GHz, id 0x106a5
cpu3: package 1, core 1, smt 0
cpu4 at mainbus0 apid 4
cpu4: Intel(R) Xeon(R) CPU           E5520  @ 2.27GHz, id 0x106a5
cpu4: package 0, core 2, smt 0
cpu5 at mainbus0 apid 20
cpu5: Intel(R) Xeon(R) CPU           E5520  @ 2.27GHz, id 0x106a5
cpu5: package 1, core 2, smt 0
cpu6 at mainbus0 apid 6
cpu6: Intel(R) Xeon(R) CPU           E5520  @ 2.27GHz, id 0x106a5
cpu6: package 0, core 3, smt 0
cpu7 at mainbus0 apid 22
cpu7: Intel(R) Xeon(R) CPU           E5520  @ 2.27GHz, id 0x106a5
cpu7: package 1, core 3, smt 0
acpi0 at mainbus0: Intel ACPICA 20170831
acpi0: X/RSDT: OemId <HP    ,ProLiant,20101217>, AslId <FOXC,00000097>
acpi0: MCFG: segment 0, bus 0-1, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF80002BAAA000 0015C4 (v01 DpgPmm P001Ist  00000011 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE4012BE0E010 000928 (v01 PmRef  P001Cst  00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFE4012BDDAC10 0003A2 (v01 PmRef  Cpu0Tst  00003000 INTL 20051117)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
IOH (PNP0C01) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
UAR1 (PNP0501) at acpi0 not configured
SIOR (PNP0C02) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
OMSC (PNP0C02) at acpi0 not configured
PCIE (PNP0C02) at acpi0 not configured
MI0 (IPI0001) at acpi0 not configured
MI1 (HPQ000B) at acpi0 not configured
RMEM (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
ACPI: Enabled 1 GPEs in block 00 to 3F
attimer1: attached to pcppi1
ipmi0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 3406 (rev. 0x13)
ppb0 at pci0 dev 5 function 0: vendor 8086 product 340c (rev. 0x13)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
ppb0: link is x4 @ 2.5GT/s
pci1 at ppb0 bus 5
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci1 dev 0 function 0: 82576 1000BaseT Ethernet (rev. 0x01)
wm0: for TX and RX interrupting at msix0 vec 0 affinity to 0
wm0: for TX and RX interrupting at msix0 vec 1 affinity to 1
wm0: for TX and RX interrupting at msix0 vec 2 affinity to 2
wm0: for TX and RX interrupting at msix0 vec 3 affinity to 3
wm0: for TX and RX interrupting at msix0 vec 4 affinity to 4
wm0: for TX and RX interrupting at msix0 vec 5 affinity to 5
wm0: for TX and RX interrupting at msix0 vec 6 affinity to 6
wm0: for TX and RX interrupting at msix0 vec 7 affinity to 7
wm0: for LINK interrupting at msix0 vec 8
wm0: PCI-Express bus
wm0: 8192 words (16 address bits) SPI EEPROM, version 1.82, Image Unique ID dc120000
wm0: Ethernet address 00:24:81:e1:05:8a
wm0: Copper
wm0: 0x74440<SPI,IOH_VALID,PCIE,NEWQUEUE,ASF_FIRM,ARC_SUBSYS>
igphy0 at wm0 phy 1: i82566 10/100/1000 media interface, rev. 1
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
wm1 at pci1 dev 0 function 1: 82576 1000BaseT Ethernet (rev. 0x01)
wm1: for TX and RX interrupting at msix1 vec 0 affinity to 0
wm1: for TX and RX interrupting at msix1 vec 1 affinity to 1
wm1: for TX and RX interrupting at msix1 vec 2 affinity to 2
wm1: for TX and RX interrupting at msix1 vec 3 affinity to 3
wm1: for TX and RX interrupting at msix1 vec 4 affinity to 4
wm1: for TX and RX interrupting at msix1 vec 5 affinity to 5
wm1: for TX and RX interrupting at msix1 vec 6 affinity to 6
wm1: for TX and RX interrupting at msix1 vec 7 affinity to 7
wm1: for LINK interrupting at msix1 vec 8
wm1: PCI-Express bus
wm1: 8192 words (16 address bits) SPI EEPROM, version 1.82, Image Unique ID dc120000
wm1: Ethernet address 00:24:81:e1:05:8b
wm1: Copper
wm1: 0x74440<SPI,IOH_VALID,PCIE,NEWQUEUE,ASF_FIRM,ARC_SUBSYS>
igphy1 at wm1 phy 1: i82566 10/100/1000 media interface, rev. 1
igphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb1 at pci0 dev 7 function 0: vendor 8086 product 340e (rev. 0x13)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 5.0GT/s
ppb1: link is x8 @ 5.0GT/s
pci2 at ppb1 bus 4
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 15b3 product 6732 (InfiniBand serial bus, revision 0xa0) at pci2 dev 0 function 0 not configured
vendor 8086 product 342e (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 0 not configured
vendor 8086 product 3422 (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 1 not configured
vendor 8086 product 3423 (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 2 not configured
ppb2 at pci0 dev 28 function 0: vendor 8086 product 3a40 (rev. 0x00)
ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 28 function 2: vendor 8086 product 3a44 (rev. 0x00)
ppb3: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci4 at ppb3 bus 2
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci4 dev 0 function 0: vendor 102b product 0522 (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
uhci0 at pci0 dev 29 function 0: vendor 8086 product 3a34 (rev. 0x00)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 8086 product 3a35 (rev. 0x00)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 8086 product 3a36 (rev. 0x00)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 8086 product 3a3a (rev. 0x00)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: 3 companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
ppb4 at pci0 dev 30 function 0: vendor 8086 product 244e (rev. 0x90)
pci5 at ppb4 bus 1
pci5: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 3a16 (rev. 0x00)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: TCO timer reboot disabled by hardware; hope SMBIOS properly handles it.
tco0: Min/Max interval 1/367 seconds
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 3a22 (rev. 0x00)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 6 ports, 32 slots, CAP 0xef20ffa5<SXS,CCCS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 4
atabus5 at ahcisata0 channel 5
isa0 at ichlpcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
acpicpu0: P0: FFH, lat  10 us, pow 91000 mW, 2268 MHz, turbo boost
acpicpu0: P1: FFH, lat  10 us, pow 80000 mW, 2267 MHz
acpicpu0: P2: FFH, lat  10 us, pow 68000 mW, 2133 MHz
acpicpu0: P3: FFH, lat  10 us, pow 57000 mW, 2000 MHz
acpicpu0: P4: FFH, lat  10 us, pow 48000 mW, 1867 MHz
acpicpu0: P5: FFH, lat  10 us, pow 40000 mW, 1733 MHz
acpicpu0: P6: FFH, lat  10 us, pow 34000 mW, 1600 MHz
acpicpu0: T0: FFH, lat   1 us, pow   640 mW, 100 %
acpicpu0: T1: FFH, lat   1 us, pow   560 mW,  88 %
acpicpu0: T2: FFH, lat   1 us, pow   480 mW,  75 %
acpicpu0: T3: FFH, lat   1 us, pow   400 mW,  63 %
acpicpu0: T4: FFH, lat   1 us, pow   320 mW,  50 %
acpicpu0: T5: FFH, lat   1 us, pow   240 mW,  38 %
acpicpu0: T6: FFH, lat   1 us, pow   160 mW,  25 %
acpicpu0: T7: FFH, lat   1 us, pow    80 mW,  13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=97
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=97
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=97
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=97
acpicpu4 at cpu4: ACPI CPU
coretemp4 at cpu4: thermal sensor, 1 C resolution, Tjmax=97
acpicpu5 at cpu5: ACPI CPU
coretemp5 at cpu5: thermal sensor, 1 C resolution, Tjmax=97
acpicpu6 at cpu6: ACPI CPU
coretemp6 at cpu6: thermal sensor, 1 C resolution, Tjmax=97
acpicpu7 at cpu7: ACPI CPU
coretemp7 at cpu7: thermal sensor, 1 C resolution, Tjmax=97
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2266874120 Hz quality 3000
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 8086 (0x8086) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ehci0: handing over low speed device on port 1 to uhci0
wd0 at atabus0 drive 0
wd0: <GB0250EAFJF>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
WARNING: 1 error while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
mountroot: trying lfs...
mountroot: trying ext2fs...
mountroot: trying ffs...
root file system type: ffs
kern.module.path=/stand/amd64/8.99.6/modules
init: copying out path `/sbin/init' 11
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: CHICONY (0x3f0) HP Basic USB Keyboard (0x24), rev 1.10/3.00, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 Variable keys, 6 Array codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
wm1: link state DOWN (was UNKNOWN)
wm1: link state UP (was DOWN)
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
ipmi0: version 2.0 interface KCS iobase 0xca2/0x2 spacing 1
Follow-Ups:
- Re: Possible regression in wm(4)?
  - From: Bert Kiers
Prev by Date: Re: dmesg spam: ahcisata0 port 1: active 2 is 0x40000001 tfd 0x2051
Next by Date: Re: Possible regression in wm(4)?
Previous by Thread: New amd64 8.99.6 panic
Next by Thread: Re: Possible regression in wm(4)?
Indexes:
Home | Main Index | Thread Index | Old Index