Can't configure new disk

Running:

NetBSD gemini.wan.vpn 6.99.31 NetBSD 6.99.31 (GEMINI) #0: Sun Feb 16 19:11:21 PST 2014 root@:/usr/src/BUILD_OBJ/sys/arch/i386/compile/GEMINI i386

From boot.dmesg I see:

wd0 at atabus4 drive 0
wd0: <ST31000528AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1 at atabus4 drive 1
wd1: <Hitachi HDS721010CLA332>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1(piixide0:0:1): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b

I can't run fdisk, disklabel, etc ... because wd1d isn't configured? ls shows:

# ls -l /dev/wd1*
brw-r----- 1 root operator 0, 8 Feb 1 2014 /dev/wd1a
brw-r----- 1 root operator 0, 9 Feb 1 2014 /dev/wd1b
brw-r----- 1 root operator 0, 10 Feb 1 2014 /dev/wd1c
brw-r----- 1 root operator 0, 11 Feb 1 2014 /dev/wd1d
brw-r----- 1 root operator 0, 12 Feb 1 2014 /dev/wd1e
brw-r----- 1 root operator 0, 13 Feb 1 2014 /dev/wd1f
brw-r----- 1 root operator 0, 14 Feb 1 2014 /dev/wd1g
brw-r----- 1 root operator 0, 15 Feb 1 2014 /dev/wd1h
brw-r----- 1 root operator 0, 524296 Feb 1 2014 /dev/wd1i
brw-r----- 1 root operator 0, 524297 Feb 1 2014 /dev/wd1j
brw-r----- 1 root operator 0, 524298 Feb 1 2014 /dev/wd1k
brw-r----- 1 root operator 0, 524299 Feb 1 2014 /dev/wd1l
brw-r----- 1 root operator 0, 524300 Feb 1 2014 /dev/wd1m
brw-r----- 1 root operator 0, 524301 Feb 1 2014 /dev/wd1n
brw-r----- 1 root operator 0, 524302 Feb 1 2014 /dev/wd1o
brw-r----- 1 root operator 0, 524303 Feb 1 2014 /dev/wd1p

What am I forgetting to do?

Thanks,

Paul