Current-Users archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: Lenovo T410, enabling C3 state works perfect
Out of curiosity, does your touchpad show up as pms or ums? I've had
some issues related to that on resume.
It's detected as pms. Full dmesg:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.99.42 (GENERICC3) #0: Thu Nov 3 22:11:22 CET 2016
root%t410.backusf2x.de@localhost:/usr/objdir/sys/arch/amd64/compile/GENERICC3
total memory = 3891 MB
avail memory = 3757 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO 2537AT1 (ThinkPad T410)
mainbus0 (root)
ACPI: RSDP 0x00000000000F6850 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000BB7EF0C6 00009C (v01 LENOVO TP-6I 00001450 LTP
00000000)
ACPI: FACP 0x00000000BB7EF200 0000F4 (v04 LENOVO TP-6I 00001450 LNVO
00000001)
ACPI BIOS Warning (bug): 32/64X length mismatch in
FADT/Pm1aControlBlock: 16/32 (20160527/tbfadt-652)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32,
using default 16 (20160527/tbfadt-736)
ACPI: DSDT 0x00000000BB7EF5D1 00F56A (v01 LENOVO TP-6I 00001450 MSFT
03000001)
ACPI: FACS 0x00000000BB6E7000 000040
ACPI: FACS 0x00000000BB6E7000 000040
ACPI: SSDT 0x00000000BB7EF3B4 00021D (v01 LENOVO TP-6I 00001450 MSFT
03000001)
ACPI: ECDT 0x00000000BB7FEB3B 000052 (v01 LENOVO TP-6I 00001450 LNVO
00000001)
ACPI: APIC 0x00000000BB7FEB8D 000068 (v01 LENOVO TP-6I 00001450 LNVO
00000001)
ACPI: MCFG 0x00000000BB7FEC49 00003C (v01 LENOVO TP-6I 00001450 LNVO
00000001)
ACPI: HPET 0x00000000BB7FEC85 000038 (v01 LENOVO TP-6I 00001450 LNVO
00000001)
ACPI: ASF! 0x00000000BB7FEDBE 0000A4 (v16 LENOVO TP-6I 00001450 PTL
00000001)
ACPI: SLIC 0x00000000BB7FEE62 000176 (v01 LENOVO TP-6I 00001450 LTP
00000000)
ACPI: BOOT 0x00000000BB7FEFD8 000028 (v01 LENOVO TP-6I 00001450 LTP
00000001)
ACPI: SSDT 0x00000000BB6E591A 00084B (v01 LENOVO TP-6I 00001450 INTL
20050513)
ACPI: TCPA 0x00000000BB78B000 000032 (v02 PTL CRESTLN 06040000
00005A52)
ACPI: DMAR 0x00000000BB781000 0000B8 (v01 INTEL CP_DALE 00000001 INTL
00000001)
ACPI: SSDT 0x00000000BB779000 0009F1 (v01 PmRef CpuPm 00003000 INTL
20061109)
ACPI: SSDT 0x00000000BB778000 000259 (v01 PmRef Cpu0Tst 00003000 INTL
20061109)
ACPI: SSDT 0x00000000BB777000 00049F (v01 PmRef ApTst 00003000 INTL
20061109)
ACPI: 6 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz, id 0x20655
cpu1 at mainbus0 apid 4
cpu1: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz, id 0x20655
acpi0 at mainbus0: Intel ACPICA 20160527
acpi0: X/RSDT: OemId <LENOVO,TP-6I ,00001450>, AslId < LTP,00000000>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE8106E7A010 00046F (v01 PmRef Cpu0Ist 00003000 INTL
20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE8106F51810 0006B2 (v01 PmRef Cpu0Cst 00003001 INTL
20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE8106E74410 000303 (v01 PmRef ApIst 00003000 INTL
20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE8106E7BC90 000119 (v01 PmRef ApCst 00003000 INTL
20061109)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
MEM (PNP0C01) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpivga0 at acpi0 (VID): ACPI Display Adapter
acpiout0 at acpivga0 (LCD0, 0x0400): ACPI Display Output Device
acpiout0: brightness levels: [1,3-6,8,10,13,17,22,29,38,49,63,80,100]
acpiout1 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device
acpiout2 at acpivga0 (DVI0, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DVI1, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DVI2, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DVI3, 0x0303): ACPI Display Output Device
acpiout6 at acpivga0 (DVI4, 0x0304): ACPI Display Output Device
acpiout7 at acpivga0 (DVI5, 0x0305): ACPI Display Output Device
acpivga0: unknown output device acpiout1
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout0): Unknown Output Device, head 0
SIO (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, LEN0015) (aux port): irq 12
TPM (SMO1200) at acpi0 not configured
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery
acpibat0: LGC LION rechargeable battery
acpibat0: granularity: low->warn 0.001 Ah, warn->full 0.001 Ah
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
thinkpad0 at acpi0 (HKEY, IBM0068)
acpiwmi0 at acpi0 (WMI1, PNP0C14-MXM2): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpiwmi1 at acpi0 (WMI1, PNP0C14-1): ACPI WMI Interface
acpiwmibus at acpiwmi1 not configured
acpitz0 at acpi0 (THM0): cpu0 cpu1
acpitz0: levels: critical 100.0 C, passive 95.5 C, passive cooling
ACPI: Enabled 3 GPEs in block 00 to 3F
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 7.2
pms0: Extended W mode, Passthrough, Palm detect, Multi-finger Report
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 0044 (rev. 0x02)
agp0 at pchb0: G4X-family chipset
agp0: detected 32252k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
i915drmkms0 at pci0 dev 2 function 0: vendor 8086 product 0046 (rev.
0x02)
drm: Memory usable by graphics device = 512M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
drm: GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on
pin 5
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
intelfb0: framebuffer at 0xffff800045240000, size 1440x900, depth 32,
stride 5760
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation),
using wskbd0
wsmux1: connecting to wsdisplay0
vendor 8086 product 3b64 (miscellaneous communications, revision 0x06)
at pci0 dev 22 function 0 not configured
wm0 at pci0 dev 25 function 0: PCH LAN (82577LM) Controller (rev. 0x06)
wm0: interrupting at msi0 vec 0
wm0: PCI-Express bus
wm0: 2048 words FLASH
wm0: Ethernet address f0:de:f1:0d:73:3d
ihphy0 at wm0 phy 2: i82577 10/100/1000 media interface, rev. 3
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
XXX OUI = 0000aa00, model = 0005, rev = 0003
ehci0 at pci0 dev 26 function 0: vendor 8086 product 3b3c (rev. 0x06)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 17
hdafg0 at hdaudio0: vendor 14f1 product 5069
hdafg0: DAC00 2ch: HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack]
hdafg0: DAC02 2ch: Speaker [Built-In]
hdafg0: ADC03 2ch: Mic In [Built-In]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdvsmfg at hdaudio0 not configured
hdafg1 at hdaudio0: vendor 8086 product 2804
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: DP01 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
ppb0 at pci0 dev 28 function 0: vendor 8086 product 3b42 (rev. 0x06)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex>
x1 @ 2.5GT/s
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 8086 product 3b44 (rev. 0x06)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex>
x1 @ 2.5GT/s
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
iwn0 at pci2 dev 0 function 0: vendor 8086 product 4238 (rev. 0x35)
iwn0: interrupting at ioapic0 pin 17
iwn0: MIMO 3T3R, MoW, address 00:24:d7:41:4a:20
iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
ppb2 at pci0 dev 28 function 3: vendor 8086 product 3b48 (rev. 0x06)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex>
x1 @ 2.5GT/s
pci3 at ppb2 bus 5
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 28 function 4: vendor 8086 product 3b4a (rev. 0x06)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex>
x1 @ 2.5GT/s
pci4 at ppb3 bus 13
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
sdhc0 at pci4 dev 0 function 0: vendor 1180 product e822 (rev. 0x01)
sdhc0: interrupting at ioapic0 pin 16
sdhc0: SDHC 1.0, rev 4, SDMA, 50000 kHz, HS 3.3V, 512 byte blocks
sdmmc0 at sdhc0 slot 0
vendor 1180 product e230 (miscellaneous system, revision 0x01) at pci4
dev 0 function 1 not configured
fwohci0 at pci4 dev 0 function 3: vendor 1180 product e832 (rev. 0x01)
fwohci0: interrupting at ioapic0 pin 19
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 f0:de:f1:ff:0d:73:3d:ff
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
ehci1 at pci0 dev 29 function 0: vendor 8086 product 3b34 (rev. 0x06)
ehci1: interrupting at ioapic0 pin 19
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
ppb4 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0xa6)
pci5 at ppb4 bus 14
pci5: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 3b07 (rev.
0x06)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 3b2f (rev.
0x06)
ahcisata0: interrupting at ioapic0 pin 16
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP
0xff20ff65<SXS,EMS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSS,SMPS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 4
atabus3 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 3b30 (rev. 0x06)
ichsmb0: interrupting at ioapic0 pin 23
iic0 at ichsmb0: I2C bus
vendor 8086 product 3b32 (miscellaneous DASP, revision 0x06) at pci0 dev
31 function 6 not configured
isa0 at ichlpcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: device 0x0000104a rev
0x4e
pci6 at mainbus0 bus 255
pci6: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb1 at pci6 dev 0 function 0: vendor 8086 product 2c62 (rev. 0x02)
pchb2 at pci6 dev 0 function 1: vendor 8086 product 2d01 (rev. 0x02)
pchb3 at pci6 dev 2 function 0: vendor 8086 product 2d10 (rev. 0x02)
pchb4 at pci6 dev 2 function 1: vendor 8086 product 2d11 (rev. 0x02)
pchb5 at pci6 dev 2 function 2: vendor 8086 product 2d12 (rev. 0x02)
pchb6 at pci6 dev 2 function 3: vendor 8086 product 2d13 (rev. 0x02)
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 3 us, pow 1000 mW
acpicpu0: C2: FFH, lat 205 us, pow 500 mW
acpicpu0: C3: FFH, lat 245 us, pow 350 mW, bus master check
acpicpu0: P0: FFH, lat 10 us, pow 25000 mW, 2400 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 25000 mW, 2399 MHz
acpicpu0: P2: FFH, lat 10 us, pow 23316 mW, 2266 MHz
acpicpu0: P3: FFH, lat 10 us, pow 21689 mW, 2133 MHz
acpicpu0: P4: FFH, lat 10 us, pow 20116 mW, 1999 MHz
acpicpu0: P5: FFH, lat 10 us, pow 18531 mW, 1866 MHz
acpicpu0: P6: FFH, lat 10 us, pow 17021 mW, 1733 MHz
acpicpu0: P7: FFH, lat 10 us, pow 15517 mW, 1599 MHz
acpicpu0: P8: FFH, lat 10 us, pow 14068 mW, 1466 MHz
acpicpu0: P9: FFH, lat 10 us, pow 12640 mW, 1333 MHz
acpicpu0: P10: FFH, lat 10 us, pow 11250 mW, 1199 MHz
acpicpu0: T0: FFH, lat 1 us, pow 11250 mW, 100 %
acpicpu0: T1: FFH, lat 1 us, pow 9843 mW, 88 %
acpicpu0: T2: FFH, lat 1 us, pow 8437 mW, 75 %
acpicpu0: T3: FFH, lat 1 us, pow 7031 mW, 63 %
acpicpu0: T4: FFH, lat 1 us, pow 5625 mW, 50 %
acpicpu0: T5: FFH, lat 1 us, pow 4218 mW, 38 %
acpicpu0: T6: FFH, lat 1 us, pow 2812 mW, 25 %
acpicpu0: T7: FFH, lat 1 us, pow 1406 mW, 13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=105
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2394234330 Hz quality 3000
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr
1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr
1
uhub1: 3 ports with 3 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0
wd0: <Intenso SSD Sata III>
wd0: drive supports 2-sector PIO transfers, LBA48 addressing
wd0: 236 GB, 490999 cyl, 16 head, 63 sec, 512 bytes/sect x 494927872
sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6
(Ultra/133) (using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <MATSHITADVD-RAM UJ892, HG97 442106, SB01>
cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
(Ultra/100) (using DMA)
uhub2 at uhub1 port 1: vendor 8087 product 0020, class 9/0, rev
2.00/0.00, addr 2
uhub2: single transaction translator
uhub3 at uhub0 port 1: vendor 8087 product 0020, class 9/0, rev
2.00/0.00, addr 2
uhub3: single transaction translator
uhub3: 6 ports with 6 removable, self powered
uhub2: 8 ports with 8 removable, self powered
ubt0 at uhub3 port 4
ubt0: Broadcom Corp Broadcom Bluetooth Device, rev 2.00/3.60, addr 3
uvideo0 at uhub3 port 6 configuration 1 interface 0: Chicony Electronics
Co., Ltd. Integrated Camera, rev 2.00/23.45, addr 4
video0 at uvideo0: Chicony Electronics Co., Ltd. Integrated Camera, rev
2.00/23.45, addr 4
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
WARNING: 7 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/7.99.42/modules
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
Home |
Main Index |
Thread Index |
Old Index