Re: Problems with IPMI and wm? sharing a physical Ethernet port

[Masanobu SAITOH <msaitoh%execsw.org@localhost>]

(2013/06/27 18:58), Masanobu SAITOH wrote:
> Hello, all.
>
> (2012/06/27 4:18), Jarle Greipsland wrote:
> > Manuel Bouyer <bouyer%antioche.eu.org@localhost> writes:
> > > On Tue, Jun 26, 2012 at 07:29:12PM +0200, Jarle Greipsland wrote:
> > > > > Do you have some media settings in ifconfig.wm0 ?
> > > > media autoselect
> > >
> > > Maybe try to remove the media settings completely
> > I tried that.  It made no difference.
> >
> >                 -jarle
>
>   This tread started 365days ago!

s/tread/thread/

 Could anyone test other motherboard which had a problem with BMC?


>   Two days ago, I fixed some bugs about BMC (if_wm.c rev. 1.260).
>
>   Today I tested with Supermicro X7SPA-HF. This is the same
> product that the first mail reported. I connected only one
> Ethernet port "LAN1" to a switch. This port is shared with BMC.
> The LAN1 port (wm0) works fine.
>
> And:
>
>   -current: BMC still respond after booted NetBSD.
>
>   6.1:      Same as above.
>
>   6.0:      BMC doesn't respond after booted NetBSD.
>
> I don't know when I fixed the bug :)
>
>
> The following log was made when netbsd was up.
> 192.168.0.250 is not wm0's address but the BMC's address.
>
> > gt110a: {175} ipmitool -I lan -H 192.168.0.250 mc info
> > Device ID                 : 32
> > Device Revision           : 1
> > Firmware Revision         : 2.66
> > IPMI Version              : 2.0
> > Manufacturer ID           : 47488
> > Manufacturer Name         : Unknown (0xB980)
> > Product ID                : 2566 (0x0a06)
> > Product Name              : Unknown (0xA06)
> > Device Available          : yes
> > Provides Device SDRs      : no
> > Additional Device Support :
> >     Sensor Device
> >     SDR Repository Device
> >     SEL Device
> >     FRU Inventory Device
> >     IPMB Event Receiver
> >     IPMB Event Generator
> >     Chassis Device
> > Aux Firmware Rev Info     :
> >     0x00
> >     0x00
> >     0x00
> >     0x00
> > gt110a: {176} ipmitool -I lan -H 192.168.0.250 sdr
> > System Temp      | 37 degrees C      | ok
> > CPU Temp         | 35 degrees C      | ok
> > CPU FAN          | disabled          | ns
> > SYS FAN          | 1510 RPM          | ok
> > CPU Vcore        | 1.16 Volts        | ok
> > Vichcore         | 1.04 Volts        | ok
> > +3.3VCC          | 3.28 Volts        | ok
> > VDIMM            | 1.83 Volts        | ok
> > +5 V             | 5.02 Volts        | ok
> > +12 V            | 11.78 Volts       | ok
> > +3.3VSB          | 3.28 Volts        | ok
> > VBAT             | 2.93 Volts        | ok
> > Chassis Intru    | 0 unspecified     | nc
> > PS Status        | 0 unspecified     | nc


--
-----------------------------------------------
                SAITOH Masanobu (msaitoh%execsw.org@localhost
                                 msaitoh%netbsd.org@localhost)