6.99.12/smd64: panic on HP Proliant DL140 G3 (ciss(4) driver)

To: current-users%NetBSD.org@localhost
Subject: 6.99.12/smd64: panic on HP Proliant DL140 G3 (ciss(4) driver)
From: Aleksey Cheusov <cheusov%tut.by@localhost>
Date: Thu, 04 Oct 2012 23:48:28 +0300
I'm trying to setup a NetBSD bulk build farm on HP Proliant DL140 G3.
For installation I used yesterdays's 6.0-RC2 iso image.  After a couple
of kernel panic (described below) I finally installed the NetBSD. Kernel
panic happens not always but with very high probability. Obviously
installed system doesn't boot too for the same reason (with 6.0_RC2
there were no any successfull attempts at all). However, Zafer's
jibbed-5.1 boots normally without any problem. I tried it five times and
the system always booted normally. With its help I installed current
6.99.12/amd64 kernel which sometimes boots but crashes very often.

Panic symptoms are very close to described here

http://www.ki.nu/~makoto/diary/2012/06/08/

See section "6.0_BETA2 (and 6.0_BETA) and ciss driver."  When the system
entered ddb, my keyboard didn't work, so I'm not sure about backtrace.

http://mova.org/~cheusov/priv/DSCN0555.JPG

Below are dmesg output for 5.1/i386 and 6.99.12/amd64 kernels.

Any clue?

======================================================================
i386/5.1 dmesg

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.1 (JIBBED) #0: Wed Nov 10 22:47:59 CET 2010
        zafer%pembe.aydogan.net@localhost:/root/livecd/work/JIBBED
total memory = 3326 MB
avail memory = 3258 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
HP ProLiant DL140 G3 (      NA)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 1862MHz, id 0x6fb
cpu1 at mainbus0 apid 4: Intel 686-class, 1862MHz, id 0x6fb
cpu2 at mainbus0 apid 1: Intel 686-class, 1862MHz, id 0x6fb
cpu3 at mainbus0 apid 5: Intel 686-class, 1862MHz, id 0x6fb
cpu4 at mainbus0 apid 2: Intel 686-class, 1862MHz, id 0x6fb
cpu5 at mainbus0 apid 6: Intel 686-class, 1862MHz, id 0x6fb
cpu6 at mainbus0 apid 3: Intel 686-class, 1862MHz, id 0x6fb
cpu7 at mainbus0 apid 7: Intel 686-class, 1862MHz, id 0x6fb
ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0 apid 9: pa 0xfec80000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <PTLTD ,  RSDT  ,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
MI0 (IPI0001) at acpi0 not configured
npx1 at acpi0 (MATH, PNP0C04): io 0xf0-0xfe irq 13
npx1: reported by CPUID; using exception 16
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
ipmi0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x25c0 (rev. 0x31)
ppb0 at pci0 dev 2 function 0: vendor 0x8086 product 0x25f7 (rev. 0x31)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci1 dev 0 function 0: vendor 0x8086 product 0x3500 (rev. 0x01)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci2 dev 0 function 0: vendor 0x8086 product 0x3510 (rev. 0x01)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci1 dev 0 function 3: vendor 0x8086 product 0x350c (rev. 0x01)
ppb3: disabling notification events
pci4 at ppb3 bus 7
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 3 function 0: vendor 0x8086 product 0x25e3 (rev. 0x31)
pci5 at ppb4 bus 8
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ppb5 at pci0 dev 4 function 0: vendor 0x8086 product 0x25fa (rev. 0x31)
pci6 at ppb5 bus 12
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
ppb6 at pci6 dev 0 function 0: vendor 0x1166 product 0x0103 (rev. 0xb4)
pci7 at ppb6 bus 13
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
ppb7 at pci7 dev 4 function 0: vendor 0x1166 product 0x0104 (rev. 0xb2)
pci8 at ppb7 bus 14
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
ciss0 at pci7 dev 8 function 0: Smart Array E200
ciss0: interrupting at ioapic0 pin 16
ciss0: 1 LD, HW rev 0, FW 1.86/1.86
scsibus0 at ciss0: 1 target, 1 lun per target
ppb8 at pci0 dev 5 function 0: vendor 0x8086 product 0x25e5 (rev. 0x31)
pci9 at ppb8 bus 15
pci9: i/o space, memory space enabled, rd/line, wr/inv ok
ppb9 at pci0 dev 6 function 0: vendor 0x8086 product 0x25e6 (rev. 0x31)
pci10 at ppb9 bus 16
pci10: i/o space, memory space enabled, rd/line, wr/inv ok
ppb10 at pci0 dev 7 function 0: vendor 0x8086 product 0x25e7 (rev. 0x31)
pci11 at ppb10 bus 17
pci11: i/o space, memory space enabled, rd/line, wr/inv ok
pchb1 at pci0 dev 16 function 0
pchb1: vendor 0x8086 product 0x25f0 (rev. 0x31)
pchb2 at pci0 dev 16 function 1
pchb2: vendor 0x8086 product 0x25f0 (rev. 0x31)
pchb3 at pci0 dev 16 function 2
pchb3: vendor 0x8086 product 0x25f0 (rev. 0x31)
pchb4 at pci0 dev 17 function 0
pchb4: vendor 0x8086 product 0x25f1 (rev. 0x31)
pchb5 at pci0 dev 19 function 0
pchb5: vendor 0x8086 product 0x25f3 (rev. 0x31)
pchb6 at pci0 dev 21 function 0
pchb6: vendor 0x8086 product 0x25f5 (rev. 0x31)
pchb7 at pci0 dev 22 function 0
pchb7: vendor 0x8086 product 0x25f6 (rev. 0x31)
ppb11 at pci0 dev 28 function 0: vendor 0x8086 product 0x2690 (rev. 0x09)
ppb11: disabling notification events
pci12 at ppb11 bus 22
pci12: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci12 dev 0 function 0: Broadcom BCM5721 Gigabit Ethernet
bge0: interrupting at ioapic0 pin 16
bge0: ASIC BCM5750 B1 (0x4101), Ethernet address 00:1e:0b:84:bf:58
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5750 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ppb12 at pci0 dev 28 function 1: vendor 0x8086 product 0x2692 (rev. 0x09)
ppb12: disabling notification events
pci13 at ppb12 bus 23
pci13: i/o space, memory space enabled, rd/line, wr/inv ok
bge1 at pci13 dev 0 function 0: Broadcom BCM5721 Gigabit Ethernet
bge1: interrupting at ioapic0 pin 17
bge1: ASIC BCM5750 B1 (0x4101), Ethernet address 00:1e:0b:84:bf:59
bge1: setting short Tx thresholds
brgphy1 at bge1 phy 1: BCM5750 1000BASE-T media interface, rev. 0
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2688 (rev. 0x09)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2689 (rev. 0x09)
uhci1: interrupting at ioapic0 pin 23
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x268a (rev. 0x09)
uhci2: interrupting at ioapic0 pin 23
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x268c (rev. 0x09)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
ppb13 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xd9)
pci14 at ppb13 bus 24
pci14: i/o space, memory space enabled
vga1 at pci14 dev 2 function 0: vendor 0x102b product 0x0522 (rev. 0x02)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x2670 (rev. 0x09)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 631xESB/632xESB IDE Controller (rev. 0x09)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
vendor 0x8086 product 0x269b (SMBus serial bus, revision 0x09) at pci0 dev 31 
function 3 not configured
isa at ichlpcib0 not configured
isa0 at mainbus0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1862000840 Hz quality 3000
scsibus0: waiting 2 seconds for devices to settle...
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-STCD-RW/DVD DRIVE GCC-4244N, , 1.00> cdrom 
removable
cd0: 32-bit data port
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
IPsec: Initialized Security Association Processing.
sd0 at scsibus0 target 0 lun 0: <HP, LOGICAL VOLUME, 1.86> disk fixed
sd0: 1862 GB, 65535 cyl, 255 head, 233 sec, 512 bytes/sect x 3906963632 sectors
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: vendor 0x2101 product 0x020f, rev 1.00/0.01, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 2 configuration 1 interface 1
uhidev1: vendor 0x2101 product 0x020f, rev 1.00/0.01, addr 2, iclass 3/1
ums0 at uhidev1: 5 buttons and Z dir
wsmouse0 at ums0 mux 0
uhidev2 at uhub2 port 1 configuration 1 interface 0
uhidev2: ServerEngines SE USB Device, rev 1.10/0.01, addr 2, iclass 3/1
ukbd1 at uhidev2
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhidev3 at uhub2 port 1 configuration 1 interface 1
uhidev3: ServerEngines SE USB Device, rev 1.10/0.01, addr 2, iclass 3/1
ums1 at uhidev3: 8 buttons and Z dir
wsmouse1 at ums1 mux 0
ciss0: normal state on 'ciss0:0' (online)
ipmi0: version 2.0 interface KCS iobase 0xca2/2 spacing 1
Kernelized RAIDframe activated
boot device: cd0
root on cd0a
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsdisplay0: screen 5 added (80x25, vt100 emulation)
wsdisplay0: screen 6 added (80x25, vt100 emulation)
wsdisplay0: screen 7 added (80x25, vt100 emulation)

======================================================================
amd64/6.99.12 dmesg

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.99.12 (GENERIC) #0: Wed Oct  3 23:31:48 UTC 2012
        
builds%b6.netbsd.org@localhost:/home/builds/ab/HEAD/amd64/201210030930Z-obj/home/builds/ab/HEAD/src/sys/arch/amd64/compile/GENERIC
total memory = 8190 MB
avail memory = 7937 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
HP ProLiant DL140 G3 (      NA)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Xeon(R) CPU           L5320  @ 1.86GHz, id 
0x6fb
cpu1 at mainbus0 apid 4: Intel(R) Xeon(R) CPU           L5320  @ 1.86GHz, id 
0x6fb
cpu2 at mainbus0 apid 1: Intel(R) Xeon(R) CPU           L5320  @ 1.86GHz, id 
0x6fb
cpu3 at mainbus0 apid 5: Intel(R) Xeon(R) CPU           L5320  @ 1.86GHz, id 
0x6fb
cpu4 at mainbus0 apid 2: Intel(R) Xeon(R) CPU           L5320  @ 1.86GHz, id 
0x6fb
cpu5 at mainbus0 apid 6: Intel(R) Xeon(R) CPU           L5320  @ 1.86GHz, id 
0x6fb
cpu6 at mainbus0 apid 3: Intel(R) Xeon(R) CPU           L5320  @ 1.86GHz, id 
0x6fb
cpu7 at mainbus0 apid 7: Intel(R) Xeon(R) CPU           L5320  @ 1.86GHz, id 
0x6fb
ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0 apid 9: pa 0xfec80000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <PTLTD ,  RSDT  ,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
MI0 (IPI0001) at acpi0 not configured
MBRD (PNP0C02) at acpi0 not configured
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
attimer1: attached to pcppi1
ipmi0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x25c0 (rev. 0x31)
ppb0 at pci0 dev 2 function 0: vendor 0x8086 product 0x25f7 (rev. 0x31)
ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci1 dev 0 function 0: vendor 0x8086 product 0x3500 (rev. 0x01)
ppb1: PCI Express 1.0 <Upstream Port of PCI-E Switch>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci2 dev 0 function 0: vendor 0x8086 product 0x3510 (rev. 0x01)
ppb2: PCI Express 1.0 <Downstream Port of PCI-E Switch>
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci1 dev 0 function 3: vendor 0x8086 product 0x350c (rev. 0x01)
ppb3: PCI Express 1.0 <PCI-E to PCI/PCI-X Bridge>
pci4 at ppb3 bus 7
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 3 function 0: vendor 0x8086 product 0x25e3 (rev. 0x31)
ppb4: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci5 at ppb4 bus 8
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ppb5 at pci0 dev 4 function 0: vendor 0x8086 product 0x25fa (rev. 0x31)
ppb5: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci6 at ppb5 bus 12
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
ppb6 at pci6 dev 0 function 0: vendor 0x1166 product 0x0103 (rev. 0xb4)
ppb6: PCI Express 1.0 <PCI-E to PCI/PCI-X Bridge>
pci7 at ppb6 bus 13
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
ppb7 at pci7 dev 4 function 0: vendor 0x1166 product 0x0104 (rev. 0xb2)
pci8 at ppb7 bus 14
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
ciss has not been converted to device_t
ciss0 at pci7 dev 8 function 0: Smart Array E200
ciss0: interrupting at ioapic0 pin 16
ciss0: 1 LD, HW rev 0, FW 1.86/1.86
scsibus0 at ciss0: 1 target, 1 lun per target
ppb8 at pci0 dev 5 function 0: vendor 0x8086 product 0x25e5 (rev. 0x31)
ppb8: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci9 at ppb8 bus 15
pci9: i/o space, memory space enabled, rd/line, wr/inv ok
ppb9 at pci0 dev 6 function 0: vendor 0x8086 product 0x25e6 (rev. 0x31)
ppb9: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci10 at ppb9 bus 16
pci10: i/o space, memory space enabled, rd/line, wr/inv ok
ppb10 at pci0 dev 7 function 0: vendor 0x8086 product 0x25e7 (rev. 0x31)
ppb10: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci11 at ppb10 bus 17
pci11: i/o space, memory space enabled, rd/line, wr/inv ok
pchb1 at pci0 dev 16 function 0: vendor 0x8086 product 0x25f0 (rev. 0x31)
pchb2 at pci0 dev 16 function 1: vendor 0x8086 product 0x25f0 (rev. 0x31)
pchb3 at pci0 dev 16 function 2: vendor 0x8086 product 0x25f0 (rev. 0x31)
pchb4 at pci0 dev 17 function 0: vendor 0x8086 product 0x25f1 (rev. 0x31)
pchb5 at pci0 dev 19 function 0: vendor 0x8086 product 0x25f3 (rev. 0x31)
pchb6 at pci0 dev 21 function 0: vendor 0x8086 product 0x25f5 (rev. 0x31)
pchb7 at pci0 dev 22 function 0: vendor 0x8086 product 0x25f6 (rev. 0x31)
ppb11 at pci0 dev 28 function 0: vendor 0x8086 product 0x2690 (rev. 0x09)
ppb11: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci12 at ppb11 bus 22
pci12: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci12 dev 0 function 0: Broadcom BCM5721 Gigabit Ethernet
bge0: interrupting at ioapic0 pin 16
bge0: adjust device control 0x1a2000 -> 0x1a5000
bge0: ASIC BCM5750 B1 (0x4101), Ethernet address 00:1e:0b:84:bf:58
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5750 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ppb12 at pci0 dev 28 function 1: vendor 0x8086 product 0x2692 (rev. 0x09)
ppb12: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci13 at ppb12 bus 23
pci13: i/o space, memory space enabled, rd/line, wr/inv ok
bge1 at pci13 dev 0 function 0: Broadcom BCM5721 Gigabit Ethernet
bge1: interrupting at ioapic0 pin 17
bge1: adjust device control 0x1a2000 -> 0x1a5000
bge1: ASIC BCM5750 B1 (0x4101), Ethernet address 00:1e:0b:84:bf:59
bge1: setting short Tx thresholds
brgphy1 at bge1 phy 1: BCM5750 1000BASE-T media interface, rev. 0
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2688 (rev. 0x09)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2689 (rev. 0x09)
uhci1: interrupting at ioapic0 pin 23
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x268a (rev. 0x09)
uhci2: interrupting at ioapic0 pin 23
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x268c (rev. 0x09)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
ppb13 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xd9)
pci14 at ppb13 bus 24
pci14: i/o space, memory space enabled
vga0 at pci14 dev 2 function 0: vendor 0x102b product 0x0522 (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x2670 (rev. 0x09)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1: Intel 631xESB/632xESB IDE Controller (rev. 
0x09)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x269b (rev. 0x09)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution
acpicpu4 at cpu4: ACPI CPU
coretemp4 at cpu4: thermal sensor, 1 C resolution
acpicpu5 at cpu5: ACPI CPU
coretemp5 at cpu5: thermal sensor, 1 C resolution
acpicpu6 at cpu6: ACPI CPU
coretemp6 at cpu6: thermal sensor, 1 C resolution
acpicpu7 at cpu7: ACPI CPU
coretemp7 at cpu7: thermal sensor, 1 C resolution
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1862013020 Hz quality 3000
scsibus0: waiting 2 seconds for devices to settle...
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-STCD-RW/DVD DRIVE GCC-4244N, , 1.00> cdrom 
removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
uhub0 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 6 ports with 6 removable, self powered
uhub2 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: handing over low speed device on port 2 to uhci0
ehci0: handing over full speed device on port 5 to uhci2
sd0 at scsibus0 target 0 lun 0: <HP, LOGICAL VOLUME, 1.86> disk fixed
sd0: 1862 GB, 65535 cyl, 255 head, 233 sec, 512 bytes/sect x 3906963632 sectors
sd0: async, 8-bit transfers, tagged queueing
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
uhidev0 at uhub2 port 2 configuration 1 interface 0
uhidev0: D-Link KVM-221, rev 1.00/0.01, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 2 configuration 1 interface 1
uhidev1: D-Link KVM-221, rev 1.00/0.01, addr 2, iclass 3/1
ums0 at uhidev1: 5 buttons and Z dir
wsmouse0 at ums0 mux 0
uhidev2 at uhub3 port 1 configuration 1 interface 0
uhidev2: ServerEngines SE USB Device, rev 1.10/0.01, addr 2, iclass 3/1
ukbd1 at uhidev2: 8 modifier keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhidev3 at uhub3 port 1 configuration 1 interface 1
uhidev3: ServerEngines SE USB Device, rev 1.10/0.01, addr 2, iclass 3/1
ums1 at uhidev3: 8 buttons and Z dir
wsmouse1 at ums1 mux 0
cprng sysctl: WARNING pseudorandom rekeying.
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
ipmi0: version 2.0 interface KCS iobase 0xca2/2 spacing 1

-- 
Best regards, Aleksey Cheusov.
Follow-Ups:
- Re: 6.99.12/smd64: panic on HP Proliant DL140 G3 (ciss(4) driver)
  - From: Aleksey Cheusov
Prev by Date: Re: kernel panic, problems getting backtrace from saved core
Next by Date: Adding the Huawei EM770W to u3g(4)
Previous by Thread: daily CVS update output
Next by Thread: Re: 6.99.12/smd64: panic on HP Proliant DL140 G3 (ciss(4) driver)
Indexes:
Home | Main Index | Thread Index | Old Index