Re: amd64-current (still?) won't boot (another one)

To: current-users%netbsd.org@localhost
Subject: Re: amd64-current (still?) won't boot (another one)
From: Markus W Kilbinger <mk%kilbi.de@localhost>
Date: Tue, 7 Aug 2012 19:19:07 +0200

Hi!

Just compiled an actual current kernel for/on my amd64 machine which
has boot problems now: It does not find its harddisks!?

Following additional error / message appeared:

  [...]
  ahcisata0 channel 0: clearing WDCTL_RST failed for drive 15
  ahcisata0 channel 2: clearing WDCTL_RST failed for drive 15

beside that no harddisk was found.

My last working kernel dmesg output is here:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.99.8 (Q) #4: Sun Jul  1 08:24:01 MEST 2012
        root@q:/usr/u/NetBSD/HEAD/src/sys/arch/amd64/compile/Q
total memory = 3583 MB
avail memory = 3467 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
System manufacturer System Product Name (System Version)
mainbus0 (root)
cpu0 at mainbus0 apid 0: AMD Phenom(tm) II X4 955 Processor, id 0x100f42
cpu1 at mainbus0 apid 1: AMD Phenom(tm) II X4 955 Processor, id 0x100f42
cpu2 at mainbus0 apid 2: AMD Phenom(tm) II X4 955 Processor, id 0x100f42
cpu3 at mainbus0 apid 3: AMD Phenom(tm) II X4 955 Processor, id 0x100f42
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 21, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <012711,OEMXSDT ,20110127>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14282936 Hz quality 2000
BROD (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
com2 at acpi0 (UAR1, PNP0501-1): io 0x3f8-0x3ff irq 4
com2: ns16550a, working fifo
fdc0 at acpi0 (FDC, PNP0700): io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
fdc0: drive 0 attached
fdc0: drive 1 not attached
fdc0: drive 2 attached
fdc0: drive 3 attached
fdc0: failed to evaluate _FDI: AE_NOT_FOUND on drive 0
fdc0: failed to evaluate _FDI: AE_NOT_FOUND on drive 2
fdc0: failed to evaluate _FDI: AE_NOT_FOUND on drive 3
aibs0 at acpi0 (ASOC, ATK0110-16843024): ASUSTeK AI Booster
OMSC (PNP0C02) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
SIOR (PNP0C02) at acpi0 not configured
PCIE (PNP0C02) at acpi0 not configured
RMEM (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
acpiwmi0 at acpi0 (AOD, PNP0C14-0): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: AMD product 0x9600 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: Asustek Computer product 0x9602 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 5 function 0: ATI Technologies product 0x9614 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
radeondrm0 at vga0: ATI Radeon 3300 Graphics
radeondrm0: Initialized radeon 1.29.0 20080613
ppb1 at pci0 dev 10 function 0: AMD product 0x9609 (rev. 0x00)
ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
mskc0 at pci2 dev 0 function 0, Yukon-2 EC Ultra rev. B0 (0x3): ioapic0 pin 18
msk0 at mskc0 port A: Ethernet address 00:22:15:86:0d:25
ukphy0 at msk0 phy 0: OUI 0x000ac2, model 0x000b, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ahcisata0 at pci0 dev 17 function 0: ATI Technologies SB700/SB800 SATA 
Controller (AHCI mode) (rev. 0x00)
ahcisata0: interrupting at ioapic0 pin 22
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.10, 4 ports, 32 slots, CAP 
0xf722ff83<CCCS,PSC,SSC,PMD,SPM,ISS=0x2=Gen2,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
ohci0 at pci0 dev 18 function 0: ATI Technologies SB700/SB800 USB OHCI 
Controller (rev. 0x00)
ohci0: interrupting at ioapic0 pin 16
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 18 function 1: ATI Technologies SB700/SB800 USB OHCI 
Controller (rev. 0x00)
ohci1: interrupting at ioapic0 pin 16
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 18 function 2: ATI Technologies SB700/SB800 USB EHCI 
Controller (rev. 0x00)
ehci0: applying AMD SB600/SB700 USB freeze workaround
ehci0: interrupting at ioapic0 pin 17
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
ohci2 at pci0 dev 19 function 0: ATI Technologies SB700/SB800 USB OHCI 
Controller (rev. 0x00)
ohci2: interrupting at ioapic0 pin 18
ohci2: OHCI version 1.0, legacy support
usb3 at ohci2: USB revision 1.0
ohci3 at pci0 dev 19 function 1: ATI Technologies SB700/SB800 USB OHCI 
Controller (rev. 0x00)
ohci3: interrupting at ioapic0 pin 18
ohci3: OHCI version 1.0, legacy support
usb4 at ohci3: USB revision 1.0
ehci1 at pci0 dev 19 function 2: ATI Technologies SB700/SB800 USB EHCI 
Controller (rev. 0x00)
ehci1: applying AMD SB600/SB700 USB freeze workaround
ehci1: interrupting at ioapic0 pin 19
ehci1: dropped intr workaround enabled
ehci1: EHCI version 1.0
ehci1: companion controllers, 3 ports each: ohci2 ohci3
usb5 at ehci1: USB revision 2.0
piixpm0 at pci0 dev 20 function 0: ATI Technologies SB600/SB700/SB800 SMBus 
Controller (rev. 0x3a)
piixpm0: interrupting at SMI, polling
iic0 at piixpm0: I2C bus
spdmem0 at iic0 addr 0x51
spdmem0: DDR2 SDRAM, no parity or ECC, 2GB, 800MHz (PC2-6400)
spdmem0: 14 rows, 10 cols, 2 ranks, 8 banks/chip, 2.50ns cycle time
spdmem0: tAA-tRCD-tRP-tRAS: 5-5-5-15
spdmem0: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing)
ixpide0 at pci0 dev 20 function 1: ATI Technologies IXP IDE Controller (rev. 
0x00)
ixpide0: bus-master DMA support present
ixpide0: primary channel configured to compatibility mode
ixpide0: primary channel interrupting at ioapic0 pin 14
atabus4 at ixpide0 channel 0
ixpide0: secondary channel configured to compatibility mode
ixpide0: secondary channel interrupting at ioapic0 pin 15
atabus5 at ixpide0 channel 1
hdaudio0 at pci0 dev 20 function 2: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 16
hdafg0 at hdaudio0: Realtek ALC888
hdafg0: DAC00 8ch: Speaker [Jack]
hdafg0: DAC01 2ch: HP Out [Jack]
hdafg0: DIG02 2ch: SPDIF Out [Jack]
hdafg0: DIG03 2ch: SPDIF Out [Built-In]
hdafg0: ADC04 2ch: Line In [Jack], Mic In [Jack]
hdafg0: ADC05 2ch: Mic In [Jack]
hdafg0: 8ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, independent
pcib0 at pci0 dev 20 function 3: ATI Technologies SB700/SB800 LPC Host 
Controller (rev. 0x00)
ppb2 at pci0 dev 20 function 4: ATI Technologies SB600 PCI to PCI Bridge (rev. 
0x00)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
cbb0 at pci3 dev 5 function 0: ENE Technology CB1410 CardBus Controller (rev. 
0x01)
puc0 at pci3 dev 6 function 0: NetMos NM9835 Dual UART and 1284 Printer port 
(com, com, lpt)
com3 at puc0 port 0: interrupting at ioapic0 pin 21
com3: ns16550a, working fifo
com4 at puc0 port 1: interrupting at ioapic0 pin 21
com4: ns16550a, working fifo
lpt0 at puc0 port 2: interrupting at ioapic0 pin 21
fwohci0 at pci3 dev 8 function 0: Lucent Technologies FW322/323 IEEE 1394 Host 
Controller (rev. 0x70)
fwohci0: interrupting at ioapic0 pin 22
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:1e:8c:00:01:6e:64:15
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
cbb0: cacheline 0x10 lattimer 0x40
cbb0: bhlc 0x24010
cbb0: interrupting at ioapic0 pin 20
cardslot0 at cbb0
cardbus0 at cardslot0: bus 4
pcmcia0 at cardslot0
ohci4 at pci0 dev 20 function 5: ATI Technologies SB700/SB800 USB OHCI 
Controller (rev. 0x00)
ohci4: interrupting at ioapic0 pin 18
ohci4: OHCI version 1.0, legacy support
usb6 at ohci4: USB revision 1.0
pchb1 at pci0 dev 24 function 0: AMD AMD64 Family10h HyperTransport 
Configuration (rev. 0x00)
pchb2 at pci0 dev 24 function 1: AMD AMD64 Family10h Address Map Configuration 
(rev. 0x00)
pchb3 at pci0 dev 24 function 2: AMD AMD64 Family10h DRAM Configuration (rev. 
0x00)
amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration
amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (Family10h)
pchb4 at pci0 dev 24 function 4: AMD AMD64 Family10h Link Configuration (rev. 
0x00)
isa0 at pcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: P0: FFH, lat   4 us, pow 27953 mW, 3400 MHz
acpicpu0: P1: FFH, lat   4 us, pow 18625 mW, 2500 MHz
acpicpu0: P2: FFH, lat   4 us, pow 12650 mW, 2100 MHz
acpicpu0: P3: FFH, lat   4 us, pow  5070 mW,  800 MHz
acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 3459914770 Hz quality 3000
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub0 at usb0: ATI Technologies OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: ATI Technologies OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
uhub2 at usb2: ATI Technologies EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
uhub3 at usb3: ATI Technologies OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 3 ports with 3 removable, self powered
uhub4 at usb4: ATI Technologies OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 3 ports with 3 removable, self powered
uhub5 at usb5: ATI Technologies EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub5: 6 ports with 6 removable, self powered
uhub6 at usb6: ATI Technologies OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 2: device present, speed: 1.5Gb/s
IPsec: Initialized Security Association Processing.
ehci0: handing over low speed device on port 5 to ohci1
wd0 at atabus0 drive 0
wd0: <SAMSUNG HD103SJ>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) 
(using DMA)
atapibus0 at atabus2: 1 targets
cd0 at atapibus0 drive 0: <ATAPI   DVD D  DH16D2S, , EP53> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) 
(using DMA)
ehci1: handing over full speed device on port 2 to ohci2
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root on wd0a dumps on wd0b
root file system type: ffs
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: Logitech USB Optical Mouse, rev 2.00/27.20, addr 2, iclass 3/1
ums0 at uhidev0: 8 buttons, W and Z dirs
wsmouse0 at ums0 mux 0
ubt0 at uhub3 port 2
ubt0: Cambridge Silicon Radio BT2.0, rev 2.00/31.64, addr 2
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
aibs0: warning under limit on 'CPU FAN Speed'
aibs0: warning under limit on 'Chassis FAN Speed'
aibs0: warning under limit on 'Power Fan Speed'
info: [drm] Setting GART location based on new memory map
info: [drm] Loading RS780 Microcode
info: [drm] Resetting GPU
info: [drm] writeback test succeeded in 1 usecs
radeondrm0: interrupting at ioapic0 pin 18

Does anybody know what is going wrong here? Did I miss something?

Markus.

Follow-Ups:
- Re: amd64-current (still?) won't boot (another one)
  - From: Manuel Bouyer

Prev by Date: X not recognizing graphics card on a specific motherboard
Next by Date: building modstat fails (on amd64)
Previous by Thread: X not recognizing graphics card on a specific motherboard
Next by Thread: Re: amd64-current (still?) won't boot (another one)
Indexes:

Home | Main Index | Thread Index | Old Index