Re: Ata & atapi bug

[vanoven <vanoven%free.fr@localhost>]

On 10/07/2012 22:56, Bernd Ernesti wrote:
> On Tue, Jul 10, 2012 at 01:47:43AM +0200, vanoven wrote:
> > Hi,
> > I got trouble booting with the last kernel on my old nc8000 laptop :
> > my ATA drive was not seen anymore while cdrom drive was.
> Please provide the dmesg output from an old kernel which worked.
>
> Bernd

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.0_BETA2 (GENERIC)
total memory = 511 MB
avail memory = 489 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Hewlett-Packard hp Compaq nc8000 (DE543AV) (F.18                      )
mainbus0 (root)
cpu0 at mainbus0: Intel(R) Pentium(R) M processor 1.60GHz, id 0x6d6
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <HP    ,HP088C  ,30080620>, AslId <CPQ ,00000001>
C0C1: ACPI: Found matching pin for 0.29.INTA at func 0: 10
C0C4: ACPI: Found matching pin for 0.29.INTB at func 1: 10
C0C3: ACPI: Found matching pin for 0.29.INTC at func 2: 10
C0C8: ACPI: Found matching pin for 0.29.INTD at func 7: 10
C0C3: ACPI: Found matching pin for 0.31.INTA at func 1: 10
C0C2: ACPI: Found matching pin for 0.31.INTB at func 5: 11
C0C1: ACPI: Found matching pin for 1.0.INTA at func 0: 10
C0C6: ACPI: Found matching pin for 2.4.INTA at func 0: 11
C0C3: ACPI: Found matching pin for 2.6.INTA at func 0: 10
C0C8: ACPI: Found matching pin for 2.13.INTA at func 0: 10
C0C5: ACPI: Found matching pin for 2.14.INTA at func 0: 11
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
acpiec0 at acpi0 (C0E7, PNP0C09): io 0x62,0x66
C00C (PNP0C01) at acpi0 not configured
acpivga0 at acpi0 (C0CF): ACPI Display Adapter
acpiout0 at acpivga0 (C0DB, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (C0DC, 0x0110): ACPI Display Output Device
acpiout2 at acpivga0 (C0DD, 0x0200): ACPI Display Output Device
acpiout3 at acpivga0 (C0DE, 0x0210): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0:   0x0100 (acpiout0): Ext. Monitor, head 0, bios detect
acpivga0:   0x0110 (acpiout1): LCD Panel, head 0, bios detect
acpivga0:   0x0200 (acpiout2): TV, head 0, bios detect
acpivga0:   0x0210 (acpiout3): Unknown Output Device, head 0, bios detect
C169 (PNP0501) at acpi0 not configured
C16E (PNP0700) at acpi0 not configured
C183 (SMCF010) at acpi0 not configured
C185 (PNP0401) at acpi0 not configured
npx1 at acpi0 (C18E, PNP0C04): io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
attimer1 at acpi0 (C18F, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (C190, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
pckbc1 at acpi0 (C192, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (C193, SYN0109) (aux port): irq 12
C1F7 (PNP0C02) at acpi0 not configured
C1F4 (PNP0C02) at acpi0 not configured
acpibat0 at acpi0 (C137, PNP0C0A-1): ACPI Battery
acpibat0: Hewlett-Packard LIon rechargeable battery
acpibat0: granularity: low->warn 0.100 Ah, warn->full 0.100 Ah
acpibat1 at acpi0 (C136, PNP0C0A-2): ACPI Battery
acpiacad0 at acpi0 (C134, ACPI0003): ACPI AC Adapter
acpibut0 at acpi0 (C139, PNP0C0E): ACPI Sleep Button
acpilid0 at acpi0 (C138, PNP0C0D): ACPI Lid Switch
acpiwmi0 at acpi0 (C1BC, PNP0C14-0): ACPI WMI Interface
wmihp0 at acpiwmi0: HP WMI mappings
C1DE (PNP0C02) at acpi0 not configured
acpifan0 at acpi0 (C212, PNP0C0B-0): ACPI Fan
acpifan1 at acpi0 (C213, PNP0C0B-1): ACPI Fan
acpifan2 at acpi0 (C214, PNP0C0B-2): ACPI Fan
acpifan3 at acpi0 (C215, PNP0C0B-3): ACPI Fan
acpitz0 at acpi0 (TZ1)
acpitz0: active cooling level 0: 62.0C
acpitz0: active cooling level 1: 54.0C
acpitz0: active cooling level 2: 47.0C
acpitz0: active cooling level 3: 40.0C
acpitz0: levels: critical 102.0 C, passive 95.0 C
acpitz1 at acpi0 (TZ2)
acpitz1: levels: critical 115.0 C, passive cooling
acpitz2 at acpi0 (TZ3)
acpitz2: levels: critical 102.0 C, passive 60.0 C, passive cooling
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 5.9
pms0: Passthrough, Palm detect, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x3340 (rev. 0x03)
agp0 at pchb0: aperture at 0xb0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x3341 (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: vendor 0x1002 product 0x4e50 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
radeondrm0 at vga1: ATI Radeon RV350 Mobility 9600 M10 NP
radeondrm0: AGP at 0xb0000000 256MB
radeondrm0: Initialized radeon 1.29.0 20080613
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x24c2 (rev. 0x03)
uhci0: interrupting at irq 10
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x24c4 (rev. 0x03)
uhci1: interrupting at irq 10
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x24c7 (rev. 0x03)
uhci2: interrupting at irq 10
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x24cd (rev. 0x03)
ehci0: interrupting at irq 10
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
ppb1 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0x83)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
ath0 at pci2 dev 4 function 0: Atheros 5212
ath0: interrupting at irq 11
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 
24Mbps 36Mbps 48Mbps 54Mbps
ath0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 5.6 phy 4.1 5 GHz radio 1.7 2 GHz radio 2.3
cbb0 at pci2 dev 6 function 0: vendor 0x1217 product 0x7223 (rev. 0x00)
cbb1 at pci2 dev 6 function 1: vendor 0x1217 product 0x7223 (rev. 0x00)
vendor 0x1217 product 0x7110 (miscellaneous system) at pci2 dev 6 
function 2 not configured
cbb2 at pci2 dev 6 function 3: vendor 0x1217 product 0x7223 (rev. 0x00)
fwohci0 at pci2 dev 13 function 0: vendor 0x104c product 0x8023 (rev. 0x00)
fwohci0: interrupting at irq 10
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 71:8b:50:00:00:00:00:a2
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
bge0 at pci2 dev 14 function 0: Broadcom BCM5705M Gigabit Ethernet
bge0: interrupting at irq 11
bge0: ASIC BCM5705 A3 (0x3003), Ethernet address 00:12:79:59:69:a4
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5705 1000BASE-T media interface, rev. 2
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
cbb0: cacheline 0x0 lattimer 0x40
cbb0: bhlc 0x824000
cbb0: interrupting at irq 10
cardslot0 at cbb0
cardbus0 at cardslot0: bus 3
pcmcia0 at cardslot0
cbb1: cacheline 0x0 lattimer 0x40
cbb1: bhlc 0x824000
cbb1: interrupting at irq 10
cardslot1 at cbb1
cardbus1 at cardslot1: bus 4
pcmcia1 at cardslot1
cbb2: cacheline 0x0 lattimer 0x40
cbb2: bhlc 0x824000
cbb2: interrupting at irq 10
cardslot2 at cbb2
cardbus2 at cardslot2: bus 5
pcmcia2 at cardslot2
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x24cc (rev. 
0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
ichlpcib0: SpeedStep enabled
gpio0 at ichlpcib0: 64 pins
piixide0 at pci0 dev 31 function 1: Intel 82801DBM IDE Controller 
(ICH4-M) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio
auich0: interrupting at irq 11
auich0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D 
stereo
auich0: ac97: ext id 0x605<AC97_22,AMAP,SPDIF,VRA>
vendor 0x8086 product 0x24c6 (modem communications, revision 0x03) at 
pci0 dev 31 function 6 not configured
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com2 at isa0 port 0x3e8-0x3ef irq 5: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
est0 at cpu0: Enhanced SpeedStep
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
auich0: measured ac97 link rate at 48001 Hz, will use 48000 Hz
audio0 at auich0: full duplex, playback, capture, mmap, independent
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
atapibus0 at atabus0: 2 targets
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
cd0 at atapibus0 drive 1: <Toshiba DVD-ROM SD-C2612, Y44E611279, 1A25> 
cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
wd0 at atabus0 drive 0
wd0: <FUJITSU MHW2040AT>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using 
DMA)
cd0(piixide0:0:1): using PIO mode 4, DMA mode 2 (using DMA)
Kernelized RAIDframe activated
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)