FTDI smarcard reader problems

[Stefan Hertenberger <stefan.hertenberger%codejunk.de@localhost>]

Hello,

is there any change to get this smartcard reader to work ?

http://www.argolis.com/

nbbox$ uname -a
NetBSD nbbox.zz 5.99.60 NetBSD 5.99.60 (GENERIC) #3: Mon Jan 16 18:51:38
CET 2012
root%nbbox.zz@localhost:/usr/build/obj.i386/sys/arch/i386/compile/GENERIC i386

/var/log/messages from NetBSD
Jan 22 12:08:53 nbbox /netbsd: ehci0: handing over full speed device on
port 3 to uhci1

nbbox$ sudo usbdevs -v
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
vendor 0x8086(0x8086), rev 1.00
 port 1 powered
 port 2 addr 0 should never happen!
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
vendor 0x8086(0x8086), rev 1.00
 port 1 powered
 port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
vendor 0x8086(0x8086), rev 1.00
 port 1 powered
 port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
vendor 0x8086(0x8086), rev 1.00
 port 1 powered
 port 2 powered
Controller /dev/usb4:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
vendor 0x8086(0x8086), rev 1.00
 port 1 powered
 port 2 powered
 port 3 powered
 port 4 powered
 port 5 powered
 port 6 powered
 port 7 powered
 port 8 powered


GNU/Linux /var/log/messages:

[ 5474.444065] usb 3-4: new full speed USB device using ohci_hcd and
address 4
[ 5474.668421] usb 3-4: New USB device found, idVendor=0403, idProduct=6001
[ 5474.668429] usb 3-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 5474.668436] usb 3-4: Product: Smartreader plus
[ 5474.668441] usb 3-4: Manufacturer: Argolis BV
[ 5474.668445] usb 3-4: SerialNumber: Reader 0
[ 5474.668676] usb 3-4: configuration #1 chosen from 1 choice
[ 5474.674545] ftdi_sio 3-4:1.0: FTDI USB Serial Device converter detected
[ 5474.674642] usb 3-4: Detected FT232BM
[ 5474.674650] usb 3-4: Number of endpoints 2
[ 5474.674657] usb 3-4: Endpoint 1 MaxPacketSize 64
[ 5474.674664] usb 3-4: Endpoint 2 MaxPacketSize 64
[ 5474.674670] usb 3-4: Setting MaxPacketSize 64
[ 5474.677554] usb 3-4: FTDI USB Serial Device converter now attached to
ttyUSB0