Re: m68k ports vs. libgcc_pic?

["John D. Baker" <jdbaker%mylinuxisp.com@localhost>]

On Sat, 5 Nov 2011, John D. Baker wrote:

> On Mon, 31 Oct 2011, Chuck Silvers wrote:
>
> > could you try again with a build that has gcc 4.5?
>
> I was finally able to test this and building packages (at least dependcies
> leading to security/sudo) works just fine.
>
> There seems to be a problem with "usr/mdec/netboot" built with the new
> toolchain.  It causes a (potentially) unending stream of garbage to the
> console port and doesn't appear to boot.  I've rebuilt a few times since
> I last tried, so I'll have to check it again when I'm next within reach
> of the reset button.  "netboot" from before the compiler switch works fine.

mvme68k "/usr/mdec/netboot" definitely fails when built with the new
compiler, etc.:

----------
Copyright Motorola Inc. 1988 - 1992, All Rights Reserved

MVME167 Debugger/Diagnostics Release Version 1.4 - 07/22/92
COLD Start

Local Memory Found =00800000 (&8388608)

MPU Clock Speed =25Mhz

167-Bug>nbh
Network Booting from: VME167, Controller 0, Device 0
Loading: netboot.mvme68k

Client IP Address      = 192.168.17.167
Server IP Address      = 192.168.17.43
Gateway IP Address     = 0.0.0.0
Subnet IP Address Mask = 255.255.255.0
Boot File Name         = netboot.mvme68k
Argument File Name     =

Network Boot File load in progress... To abort hit <BREAK>

Bytes Received =&23736, Bytes Loaded =&23736
Bytes/Second   =&23736, Elapsed Time =1 Second(s)
PC   =003F0008 SR   =2700=TR:OFF_S._7_....
VBR  =FFE00000 USP  =FFE10000 MSP  =FFE10000 ISP* =FFE10000
SFC  =1=UD     DFC  =1=UD     CACR =00000000=D:._I:.
D0   =00000000 D1   =00000000 D2   =00000000 D3   =00000000
D4   =49504C2C D5   =00000000 D6   =00000000 D7   =00000000
A0   =FFF46000 A1   =003F0008 A2   =FFE06620 A3   =FFE06520
A4   =FFE06520 A5   =FFE06420 A6   =FFE0642F A7   =FFE10000
003F0008 48E78080          MOVEM.L     D0/A0,-(A7)
167-Bug>g
Effective address: 003F0008
P$.ÿøN^Nu / //NO!NuNqB§NO râ¨NuNq y?ZèJgBN¹?O´B0(
                                                 
#À?ZìN¹?¨N¹?ONqNOcHy?Z¼Hy?ZN¹?IP`þNqB§NOp  @Nu>> %s MVME%x netboot (via %s) [%s]
                                                 sbootboot: %s: %s
                                                                  boot: ERROR: 
ethernet address not set!netie%d: ie_probe called
                                                ie%d: send %d to 
%x:%x:%x:%x:%x:%x
  ie%d: ie_match --> %d
                       ie%d: ie_match --> 0
                                           ie%d: unknown errorie%d: ie_reset 
cal[...]
[Seemingly continuous stream of garbage output]
[Reset button pressed]


Meanwhile, the older versions of the netboot binary (from 4.0, 5.1, and
-current before the compiler change) all work properly.  Maybe need to
keep "-O2" for the netboot binary?

Once booted with the older versions of "netboot", everything else seems
to work properly.

--
|/"\ John D. Baker, KN5UKS               NetBSD     Darwin/MacOS X
|\ / jdbaker[snail]mylinuxisp[flyspeck]com    OpenBSD            FreeBSD
| X  No HTML/proprietary data in email.   BSD just sits there and works!
|/ \ GPGkeyID:  D703 4A7E 479F 63F8 D3F4  BD99 9572 8F23 E4AD 1645