Current-Users archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: lvm+DIOCCACHESYNC woes
On 06/07/11 11:17, Adam Hamsik wrote:
> It should work on cgd, too see [1]. Can you test some small patch for me ?
> I will add some debugging to both drivers to see from where is that error
> coming.
>
Sure, no problem.
> Can you share dmesg with us ? that might be useful to get an idea about disk
> driver used.
1 INT_B (type 0x0<type=0x0> flags 0x0<pol=0x0,trig=0x0>)
local apic: pin 0 attached to pci10 device 1 INT_C (type 0x0<type=0x0>
flags 0x0<pol=0x0,trig=0x0>)
local apic: pin 0 attached to pci10 device 1 INT_D (type 0x0<type=0x0>
flags 0x0<pol=0x0,trig=0x0>)
local apic: pin 0 attached to pci10 device 2 INT_A (type 0x0<type=0x0>
flags 0x0<pol=0x0,trig=0x0>)
local apic: pin 0 attached to pci10 device 2 INT_B (type 0x0<type=0x0>
flags 0x0<pol=0x0,trig=0x0>)
local apic: pin 0 attached to pci10 device 2 INT_C (type 0x0<type=0x0>
flags 0x0<pol=0x0,trig=0x0>)
local apic: pin 0 attached to pci10 device 2 INT_D (type 0x0<type=0x0>
flags 0x0<pol=0x0,trig=0x0>)
ioapic0: pin 16 attached to pci1 device 0 INT_A (type 0x0<type=0x0>
flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 17 attached to pci1 device 0 INT_B (type 0x0<type=0x0>
flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 18 attached to pci1 device 0 INT_C (type 0x0<type=0x0>
flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 19 attached to pci1 device 0 INT_D (type 0x0<type=0x0>
flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 0 attached to pci2 device 8 INT_A (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 1 attached to pci2 device 8 INT_B (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 14 attached to pci2 device 14 INT_A (type 0x0<type=0x0>
flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci11 device 0 INT_A (type 0x0<type=0x0>
flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 17 attached to pci11 device 0 INT_B (type 0x0<type=0x0>
flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 18 attached to pci11 device 0 INT_C (type 0x0<type=0x0>
flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 19 attached to pci11 device 0 INT_D (type 0x0<type=0x0>
flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci12 device 0 INT_A (type 0x0<type=0x0>
flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 17 attached to pci12 device 0 INT_B (type 0x0<type=0x0>
flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 18 attached to pci12 device 0 INT_C (type 0x0<type=0x0>
flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 19 attached to pci12 device 0 INT_D (type 0x0<type=0x0>
flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci13 device 0 INT_A (type 0x0<type=0x0>
flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 17 attached to pci13 device 0 INT_B (type 0x0<type=0x0>
flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 18 attached to pci13 device 0 INT_C (type 0x0<type=0x0>
flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 19 attached to pci13 device 0 INT_D (type 0x0<type=0x0>
flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci3 device 0 INT_A (type 0x0<type=0x0>
flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 17 attached to pci3 device 0 INT_B (type 0x0<type=0x0>
flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 18 attached to pci3 device 0 INT_C (type 0x0<type=0x0>
flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 19 attached to pci3 device 0 INT_D (type 0x0<type=0x0>
flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 19 attached to pci15 device 13 INT_A (type 0x0<type=0x0>
flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: int9
0x18958<vector=0x58,delmode=0x1,logical,level,masked,dest=0x0>
0x1000000<target=0x1>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
WHEA (PNP0C33) [ACPI Hardware Error Device] at acpi0 not configured
SPK (PNP0C01) [System Board] at acpi0 not configured
TMR (PNP0100) [AT Timer] at acpi0 not configured
COMA (PNP0501) [16550A-compatible COM port] at acpi0 not configured
COMB (PNP0501) [16550A-compatible COM port] at acpi0 not configured
MBIO (PNP0C01) [System Board] at acpi0 not configured
NIPM (IPI0001) [Intelligent Platform Management Interface] at acpi0 not
configured
PEHB (PNP0C02) [Motherboard Register Resources] at acpi0 not configured
HPET (PNP0103) [HPET Timer] at acpi0 not configured
acpi0: [MADT] LAPIC : CPU ID 1, LAPIC ID 0, FLAGS 0x01
acpi0: [MADT] LAPIC : CPU ID 2, LAPIC ID 6, FLAGS 0x01
acpi0: [MADT] LAPIC : CPU ID 3, LAPIC ID 1, FLAGS 0x01
acpi0: [MADT] LAPIC : CPU ID 4, LAPIC ID 7, FLAGS 0x01
acpi0: [MADT] LAPIC : CPU ID 5, LAPIC ID 20, FLAGS 0x00
acpi0: [MADT] LAPIC : CPU ID 6, LAPIC ID 21, FLAGS 0x00
acpi0: [MADT] LAPIC : CPU ID 7, LAPIC ID 22, FLAGS 0x00
acpi0: [MADT] LAPIC : CPU ID 8, LAPIC ID 23, FLAGS 0x00
acpi0: [MADT] LAPIC NMI : CPU ID 255, LINT 1, FLAGS 0x05
acpi0: [MADT] INTR OVERRIDE : BUS 0, IRQ 0, GSI 2, FLAGS 0x00
acpi0: [MADT] INTR OVERRIDE : BUS 0, IRQ 9, GSI 9, FLAGS 0x0D
acpi0: [MADT] I/O APIC : ID 8, GSI 0, ADDR 0xFEC00000
acpi0: [MADT] I/O APIC : ID 9, GSI 64, ADDR 0xFEC81000
acpi0: [FADT] FACS : 0x00000000CFB85C00
acpi0: [FADT] DSDT : 0x00000000CFB66000
acpi0: [FADT] INT_MODEL : 0x0000000000000000
acpi0: [FADT] PM_PROFILE : 0x0000000000000004
acpi0: [FADT] SCI_INT : 0x0000000000000009
acpi0: [FADT] SMI_CMD : 0x00000000000000B2
acpi0: [FADT] ACPI_ENABLE : 0x0000000000000070
acpi0: [FADT] ACPI_DISABLE : 0x0000000000000071
acpi0: [FADT] S4BIOS_REQ : 0x0000000000000000
acpi0: [FADT] PSTATE_CNT : 0x0000000000000090
acpi0: [FADT] PM1a_EVT_BLK : 0x0000000000000800
acpi0: [FADT] PM1b_EVT_BLK : 0x0000000000000000
acpi0: [FADT] PM1a_CNT_BLK : 0x0000000000000804
acpi0: [FADT] PM1b_CNT_BLK : 0x0000000000000000
acpi0: [FADT] PM2_CNT_BLK : 0x0000000000000000
acpi0: [FADT] PM_TMR_BLK : 0x0000000000000808
acpi0: [FADT] GPE0_BLK : 0x0000000000000828
acpi0: [FADT] GPE1_BLK : 0x0000000000000000
acpi0: [FADT] PM1_EVT_LEN : 0x0000000000000004
acpi0: [FADT] PM1_CNT_LEN : 0x0000000000000002
acpi0: [FADT] PM2_CNT_LEN : 0x0000000000000000
acpi0: [FADT] PM_TMR_LEN : 0x0000000000000004
acpi0: [FADT] GPE0_BLK_LEN : 0x0000000000000008
acpi0: [FADT] GPE1_BLK_LEN : 0x0000000000000000
acpi0: [FADT] GPE1_BASE : 0x0000000000000000
acpi0: [FADT] CST_CNT : 0x0000000000000090
acpi0: [FADT] P_LVL2_LAT : 0x00000000000001F4
acpi0: [FADT] P_LVL3_LAT : 0x000000000000003C
acpi0: [FADT] FLUSH_SIZE : 0x0000000000000000
acpi0: [FADT] FLUSH_STRIDE : 0x0000000000000000
acpi0: [FADT] DUTY_OFFSET : 0x0000000000000000
acpi0: [FADT] DUTY_WIDTH : 0x0000000000000000
acpi0: [FADT] DAY_ALRM : 0x0000000000000000
acpi0: [FADT] MON_ALRM : 0x0000000000000000
acpi0: [FADT] CENTURY : 0x0000000000000032
acpi0: [FADT] IAPC_BOOT_ARCH : 0x0000000000000013
acpi0: [FADT] RESET_VALUE : 0x0000000000000006
acpi0: [FADT] WBINVD : 0x0000000000000001
acpi0: [FADT] WBINVD_FLUSH : 0x0000000000000000
acpi0: [FADT] PROC_C1 : 0x0000000000000004
acpi0: [FADT] P_LVL2_UP : 0x0000000000000000
acpi0: [FADT] PWR_BUTTON : 0x0000000000000000
acpi0: [FADT] SLP_BUTTON : 0x0000000000000020
acpi0: [FADT] FIX_RTC : 0x0000000000000000
acpi0: [FADT] RTC_S4 : 0x0000000000000080
acpi0: [FADT] TMR_VAL_EXT : 0x0000000000000000
acpi0: [FADT] DCK_CAP : 0x0000000000000000
acpi0: [FADT] RESET_REG_SUP : 0x0000000000000000
acpi0: [FADT] SEALED_CASE : 0x0000000000000000
acpi0: [FADT] HEADLESS : 0x0000000000000000
acpi0: [FADT] CPU_SW_SLP : 0x0000000000000000
acpi0: [FADT] PCI_EXP_WAK : 0x0000000000000000
acpi0: [FADT] PLATFORM_CLK : 0x0000000000000000
acpi0: [FADT] S4_RTC_STS : 0x0000000000000000
acpi0: [FADT] REMOTE_POWER : 0x0000000000000000
acpi0: [FADT] APIC_CLUSTER : 0x0000000000000000
acpi0: [FADT] APIC_PHYSICAL : 0x0000000000000000
acpi0: [\ ] HID - UID - STA 0xFFFFFFFF ADR -
acpi0: [CPU1] HID - UID - STA 0xFFFFFFFF ADR -
acpi0: [CPU2] HID - UID - STA 0xFFFFFFFF ADR -
acpi0: [CPU3] HID - UID - STA 0xFFFFFFFF ADR -
acpi0: [CPU4] HID - UID - STA 0xFFFFFFFF ADR -
acpi0: [CPU5] HID - UID - STA 0xFFFFFFFF ADR -
acpi0: [CPU6] HID - UID - STA 0xFFFFFFFF ADR -
acpi0: [CPU7] HID - UID - STA 0xFFFFFFFF ADR -
acpi0: [CPU8] HID - UID - STA 0xFFFFFFFF ADR -
acpi0: [_SB ] HID - UID - STA 0xFFFFFFFF ADR -
acpi0: [WHEA] HID PNP0C33 UID WHEA STA 0xFFFFFFFF ADR -
acpi0: [PCI0] HID PNP0A08 UID - STA 0xFFFFFFFF ADR 0x0000000000000000
acpi0: [PEX2] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000020000
acpi0: [UPST] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000000
acpi0: [DWN1] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000000
acpi0: [DWN2] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000010000
acpi0: [PE2X] HID - UID - STA 0x00000000 ADR 0x00000000FFFFFFFF
acpi0: [PEX3] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000030000
acpi0: [PE2P] HID - UID - STA 0x0000000F ADR 0x0000000000000000
acpi0: [PEX4] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000040000
acpi0: [PE2P] HID - UID - STA 0x00000000 ADR 0x00000000FFFFFFFF
acpi0: [PEX5] HID - UID - STA 0x00000000 ADR 0x00000000FFFFFFFF
acpi0: [PE2P] HID - UID - STA 0x0000000F ADR 0x0000000000000000
acpi0: [PEX6] HID - UID - STA 0x0000000F ADR 0x0000000000060000
acpi0: [PXHA] HID - UID - STA 0x00000000 ADR 0x00000000FFFFFFFF
acpi0: [PXHB] HID - UID - STA 0x00000000 ADR 0x00000000FFFFFFFF
acpi0: [SBEX] HID - UID - STA 0xFFFFFFFF ADR 0x00000000001C0000
acpi0: [COMP] HID - UID - STA 0xFFFFFFFF ADR 0x00000000001E0000
acpi0: [ISA ] HID - UID - STA 0xFFFFFFFF ADR 0x00000000001F0000
acpi0: [DMA ] HID PNP0200 UID - STA 0xFFFFFFFF ADR -
acpi0: [FPU ] HID PNP0C04 UID - STA 0xFFFFFFFF ADR -
acpi0: [PIC ] HID PNP0000 UID - STA 0xFFFFFFFF ADR -
acpi0: [SPK ] HID PNP0C01 UID 2 STA 0xFFFFFFFF ADR -
acpi0: [RTC ] HID PNP0B00 UID - STA 0xFFFFFFFF ADR -
acpi0: [TMR ] HID PNP0100 UID - STA 0xFFFFFFFF ADR -
acpi0: [FDC ] HID PNP0700 UID - STA 0x0000000D ADR -
acpi0: [COMA] HID PNP0501 UID 1 STA 0x0000000F ADR -
acpi0: [COMB] HID PNP0501 UID 2 STA 0x0000000F ADR -
acpi0: [KBD ] HID PNP0303 UID - STA 0x00000000 ADR -
acpi0: [MOU ] HID PNP0F13 UID - STA 0x00000000 ADR -
acpi0: [MBIO] HID PNP0C01 UID 0 STA 0xFFFFFFFF ADR -
acpi0: [NIPM] HID IPI0001 UID 5 STA 0x0000000F ADR -
acpi0: [MBI1] HID PNP0C01 UID 1 STA 0x00000000 ADR -
acpi0: [TPM ] HID PNP0C31 UID - STA 0x00000000 ADR -
acpi0: [MCHD] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000100000
acpi0: [MCHM] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000100001
acpi0: [PEHB] HID PNP0C02 UID 0 STA 0xFFFFFFFF ADR -
acpi0: [HPET] HID PNP0103 UID 0 STA 0x0000000B ADR -
acpi0: [LK00] HID PNP0C0F UID 1 STA 0x0000000B ADR -
acpi0: [LK01] HID PNP0C0F UID 2 STA 0x00000009 ADR -
acpi0: [LK02] HID PNP0C0F UID 3 STA 0x00000009 ADR -
acpi0: [LK03] HID PNP0C0F UID 4 STA 0x0000000B ADR -
acpi0: [LK04] HID PNP0C0F UID 5 STA 0x0000000B ADR -
acpi0: [LK05] HID PNP0C0F UID 6 STA 0x0000000B ADR -
acpi0: [LK06] HID PNP0C0F UID 7 STA 0x00000009 ADR -
acpi0: [LK07] HID PNP0C0F UID 8 STA 0x00000009 ADR -
acpi0: [_TZ ] HID - UID - STA 0xFFFFFFFF ADR -
\ [06] []
CPU1 [12] []
CPU2 [12] []
CPU3 [12] []
CPU4 [12] []
CPU5 [12] []
CPU6 [12] []
CPU7 [12] []
CPU8 [12] []
_SB [06] []
WHEA [06] []
PCI0 [06] [] (PCI) @ 0x00:0x00:0x00:0x00 [R] [B] -> 0x00:0x00
PEX2 [06] [] (PCI) @ 0x00:0x00:0x02:0x00 [B] -> 0x00:0x05
UPST [06] [] (PCI) @ 0x00:0x05:0x00:0x00 [B] -> 0x00:0x06
DWN1 [06] [] (PCI) @ 0x00:0x06:0x00:0x00 [B] ->
0x00:0x07
DWN2 [06] [] (PCI) @ 0x00:0x06:0x01:0x00 [B] ->
0x00:0x09
PE2X [06] []
PEX3 [06] [] (PCI) @ 0x00:0x00:0x03:0x00 [B] -> 0x00:0x01
PE2P [06] [] (PCI) @ 0x00:0x01:0x00:0x00 [B] -> 0x00:0x02
PEX4 [06] [] (PCI) @ 0x00:0x00:0x04:0x00 [B] -> 0x00:0x0B
PE2P [06] []
PEX5 [06] []
PE2P [06] []
PEX6 [06] [] (PCI) @ 0x00:0x00:0x06:0x00 [B] -> 0x00:0x0D
PXHA [06] []
PXHB [06] []
SBEX [06] [] (PCI) @ 0x00:0x00:0x1C:0x00 [B] -> 0x00:0x03
COMP [06] [] (PCI) @ 0x00:0x00:0x1E:0x00 [B] -> 0x00:0x0F
ISA [06] [] (PCI) @ 0x00:0x00:0x1F:0x00
DMA [06] []
FPU [06] []
PIC [06] []
SPK [06] []
RTC [06] []
TMR [06] []
FDC [06] []
COMA [06] []
COMB [06] []
KBD [06] []
MOU [06] []
MBIO [06] []
NIPM [06] []
MBI1 [06] []
TPM [06] []
MCHD [06] [] (PCI) @ 0x00:0x00:0x10:0x00
MCHM [06] [] (PCI) @ 0x00:0x00:0x10:0x01
PEHB [06] []
HPET [06] []
LK00 [06] []
LK01 [06] []
LK02 [06] []
LK03 [06] []
LK04 [06] []
LK05 [06] []
LK06 [06] []
LK07 [06] []
_TZ [06] []
pci0 at hypervisor0 bus 0: configuration mode 1
hypervisor0: added to list as bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x25c0 (rev. 0x12)
ppb0 at pci0 dev 2 function 0: vendor 0x8086 product 0x25e2 (rev. 0x12)
ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 5
ppb0: added to list as bus 5
pci1: i/o space, memory space enabled
ppb1 at pci1 dev 0 function 0: vendor 0x8086 product 0x3500 (rev. 0x01)
ppb1: PCI Express 1.0 <Upstream Port of PCI-E Switch>
pci2 at ppb1 bus 6
ppb1: added to list as bus 6
pci2: i/o space, memory space enabled
ppb2 at pci2 dev 0 function 0: vendor 0x8086 product 0x3510 (rev. 0x01)
ppb2: PCI Express 1.0 <Downstream Port of PCI-E Switch>
pci3 at ppb2 bus 7
ppb2: added to list as bus 7
pci3: i/o space, memory space enabled
ppb3 at pci3 dev 0 function 0: vendor 0x1166 product 0x0103 (rev. 0xc3)
ppb3: PCI Express 1.0 <PCI-E to PCI/PCI-X Bridge>
pci4 at ppb3 bus 8
ppb3: added to list as bus 8
pci4: i/o space, memory space enabled
bnx0 at pci4 dev 0 function 0: Broadcom NetXtreme II BCM5708 1000Base-T
ioapic0: int16
0x1a998<vector=0x98,delmode=0x1,logical,actlo,level,masked,dest=0x0>
0xf000000<target=0xf>
bnx0: Ethernet address 00:19:b9:f3:a9:5f
bnx0: interrupting at ioapic0 pin 16, event channel 4
brgphy0 at bnx0 phy 1: BCM5708C 1000BASE-T media interface, rev. 6
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb4 at pci2 dev 1 function 0: vendor 0x8086 product 0x3514 (rev. 0x01)
ppb4: PCI Express 1.0 <Downstream Port of PCI-E Switch>
pci5 at ppb4 bus 9
ppb4: added to list as bus 9
pci5: i/o space, memory space enabled
ppb5 at pci1 dev 0 function 3: vendor 0x8086 product 0x350c (rev. 0x01)
ppb5: PCI Express 1.0 <PCI-E to PCI/PCI-X Bridge>
pci6 at ppb5 bus 10
ppb5: added to list as bus 10
pci6: i/o space, memory space enabled
ppb6 at pci0 dev 3 function 0: vendor 0x8086 product 0x25e3 (rev. 0x12)
ppb6: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci7 at ppb6 bus 1
ppb6: added to list as bus 1
pci7: i/o space, memory space enabled
ppb7 at pci7 dev 0 function 0: vendor 0x8086 product 0x032c (rev. 0x09)
ppb7: PCI Express 1.0 <PCI-E to PCI/PCI-X Bridge>
pci8 at ppb7 bus 2
ppb7: added to list as bus 2
pci8: i/o space, memory space enabled
mpt0 at pci8 dev 8 function 0: vendor 0x1000 product 0x0054
ioapic1: int0
0x1a9d8<vector=0xd8,delmode=0x1,logical,actlo,level,masked,dest=0x0>
0xf000000<target=0xf>
mpt0: interrupting at ioapic1 pin 0, event channel 5
mpt0: Phy 0: Link Rate 3.0 Gbps
mpt0: Phy 1: Link Rate 3.0 Gbps
scsibus0 at mpt0: 173 targets, 8 luns per target
ppb8 at pci0 dev 4 function 0: vendor 0x8086 product 0x25f8 (rev. 0x12)
ppb8: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci9 at ppb8 bus 11
ppb8: added to list as bus 11
pci9: i/o space, memory space enabled
ppb9 at pci0 dev 5 function 0: vendor 0x8086 product 0x25e5 (rev. 0x12)
ppb9: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci10 at ppb9 bus 12
ppb9: added to list as bus 12
pci10: i/o space, memory space enabled
ppb10 at pci0 dev 6 function 0: vendor 0x8086 product 0x25f9 (rev. 0x12)
ppb10: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci11 at ppb10 bus 13
ppb10: added to list as bus 13
pci11: i/o space, memory space enabled
ppb11 at pci0 dev 7 function 0: vendor 0x8086 product 0x25e7 (rev. 0x12)
ppb11: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci12 at ppb11 bus 14
ppb11: added to list as bus 14
pci12: i/o space, memory space enabled
pchb1 at pci0 dev 16 function 0: vendor 0x8086 product 0x25f0 (rev. 0x12)
pchb2 at pci0 dev 16 function 1: vendor 0x8086 product 0x25f0 (rev. 0x12)
pchb3 at pci0 dev 16 function 2: vendor 0x8086 product 0x25f0 (rev. 0x12)
pchb4 at pci0 dev 17 function 0: vendor 0x8086 product 0x25f1 (rev. 0x12)
pchb5 at pci0 dev 19 function 0: vendor 0x8086 product 0x25f3 (rev. 0x12)
pchb6 at pci0 dev 21 function 0: vendor 0x8086 product 0x25f5 (rev. 0x12)
pchb7 at pci0 dev 22 function 0: vendor 0x8086 product 0x25f6 (rev. 0x12)
ppb12 at pci0 dev 28 function 0: vendor 0x8086 product 0x2690 (rev. 0x09)
ppb12: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci13 at ppb12 bus 3
ppb12: added to list as bus 3
pci13: i/o space, memory space enabled
ppb13 at pci13 dev 0 function 0: vendor 0x1166 product 0x0103 (rev. 0xc3)
ppb13: PCI Express 1.0 <PCI-E to PCI/PCI-X Bridge>
pci14 at ppb13 bus 4
ppb13: added to list as bus 4
pci14: i/o space, memory space enabled
bnx1 at pci14 dev 0 function 0: Broadcom NetXtreme II BCM5708 1000Base-T
bnx1: Ethernet address 00:19:b9:f3:a9:5d
bnx1: interrupting at ioapic0 pin 16, event channel 4
brgphy1 at bnx1 phy 1: BCM5708C 1000BASE-T media interface, rev. 6
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2688 (rev. 0x09)
ioapic0: int21
0x1a9c0<vector=0xc0,delmode=0x1,logical,actlo,level,masked,dest=0x0>
0xf000000<target=0xf>
uhci0: interrupting at ioapic0 pin 21, event channel 6
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2689 (rev. 0x09)
ioapic0: int20
0x1a9b8<vector=0xb8,delmode=0x1,logical,actlo,level,masked,dest=0x0>
0xf000000<target=0xf>
uhci1: interrupting at ioapic0 pin 20, event channel 7
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x268a (rev. 0x09)
uhci2: interrupting at ioapic0 pin 21, event channel 6
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x268c (rev. 0x09)
ehci0: interrupting at ioapic0 pin 21, event channel 6
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
ppb14 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xd9)
pci15 at ppb14 bus 15
ppb14: added to list as bus 15
pci15: i/o space, memory space enabled
vga0 at pci15 dev 13 function 0: vendor 0x1002 product 0x515e (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x2670 (rev.
0x09)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1: Intel 631xESB/632xESB IDE Controller
(rev. 0x09)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
ioapic0: int14 0x988<vector=0x88,delmode=0x1,logical,dest=0x0>
0x1000000<target=0x1>
piixide0: primary channel interrupting at ioapic0 pin 14, event channel 8
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
isa0 at ichlpcib0
pckbc0 at isa0 port 0x60-0x64
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
Xen clock: using event channel 9
timecounter: Timecounter "xen_system_time" frequency 1000000000 Hz
quality 10000
xenbus0: using event channel 10
scsibus0: waiting 2 seconds for devices to settle...
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-ST GCR-8240N, , 1.10> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
sd0 at scsibus0 target 0 lun 0: <ATA, WDC WD5003ABYX-0, 1S01> disk fixed
sd0: 465 GB, 476941 cyl, 16 head, 127 sec, 512 bytes/sect x 976773168
sectors
sd1 at scsibus0 target 1 lun 0: <ATA, WDC WD5003ABYX-0, 1S01> disk fixed
sd1: 465 GB, 476941 cyl, 16 head, 127 sec, 512 bytes/sect x 976773168
sectors
probe(mpt0:0:8:0): generic HBA error
uhub4 at uhub3 port 1: vendor 0x413c product 0xa001, class 9/0, rev
2.00/0.00, addr 2
uhub4: multiple transaction translators
uhub4: 2 ports with 2 removable, self powered
uhidev0 at uhub4 port 1 configuration 1 interface 0
uhidev0: Dell DRAC5, rev 1.10/0.00, addr 3, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev1 at uhub4 port 1 configuration 1 interface 1
uhidev1: Dell DRAC5, rev 1.10/0.00, addr 3, iclass 3/1
uhid0 at uhidev1: input=6, output=0, feature=0
umass0 at uhub4 port 2 configuration 1 interface 0
umass0: DELL INC. DRAC5 VIRTUAL MEDIA, rev 2.00/0.00, addr 4
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, 1 lun per target
umass1 at uhub4 port 2 configuration 1 interface 1
cd1 at scsibus1 target 0 lun 0: <Dell, Virtual CDROM, 123> cdrom removable
umass1: DELL INC. DRAC5 VIRTUAL MEDIA, rev 2.00/0.00, addr 4
umass1: using SCSI over Bulk-Only
scsibus2 at umass1: 2 targets, 1 lun per target
sd2 at scsibus2 target 0 lun 0: <Dell, Virtual Floppy, 123> disk removable
sd2: drive offline
sd2(umass1:0:0:0): not ready, data = 00 00 00 00 3a 00 00 00 00 00
sd2: unable to open device, error = 19
uhub5 at uhub3 port 5: vendor 0x04b4 product 0x6560, class 9/0, rev
2.00/0.0b, addr 5
uhub5: multiple transaction translators
uhub5: 4 ports with 4 removable, self powered
Kernelized RAIDframe activated
sd2(umass1:0:0:0): not ready, data = 00 00 00 00 3a 00 00 00 00 00
raid0: RAID Level 1
raid0: Components: /dev/sd0a /dev/sd1a
raid0: Total Sectors: 67903232 (33155 MB)
raid1: RAID Level 1
raid1: Components: /dev/sd0f /dev/sd1f
raid1: Total Sectors: 891041920 (435079 MB)
boot device: raid0
root on raid0a dumps on raid0b
root file system type: ffs
ipmi0: version 2.0 interface KCS iobase 0xca8/8 spacing 4
sd2(umass1:0:0:0): not ready, data = 00 00 00 00 3a 00 00 00 00 00
sd2(umass1:0:0:0): not ready, data = 00 00 00 00 3a 00 00 00 00 00
sd2(umass1:0:0:0): not ready, data = 00 00 00 00 3a 00 00 00 00 00
sd2(umass1:0:0:0): not ready, data = 00 00 00 00 3a 00 00 00 00 00
sd2(umass1:0:0:0): not ready, data = 00 00 00 00 3a 00 00 00 00 00
sd2(umass1:0:0:0): not ready, data = 00 00 00 00 3a 00 00 00 00 00
sd2(umass1:0:0:0): not ready, data = 00 00 00 00 3a 00 00 00 00 00
sd2(umass1:0:0:0): not ready, data = 00 00 00 00 3a 00 00 00 00 00
sd2(umass1:0:0:0): not ready, data = 00 00 00 00 3a 00 00 00 00 00
sd2(umass1:0:0:0): not ready, data = 00 00 00 00 3a 00 00 00 00 00
sd2(umass1:0:0:0): not ready, data = 00 00 00 00 3a 00 00 00 00 00
sd2(umass1:0:0:0): not ready, data = 00 00 00 00 3a 00 00 00 00 00
sd2(umass1:0:0:0): not ready, data = 00 00 00 00 3a 00 00 00 00 00
sd2(umass1:0:0:0): not ready, data = 00 00 00 00 3a 00 00 00 00 00
sd2(umass1:0:0:0): not ready, data = 00 00 00 00 3a 00 00 00 00 00
Home |
Main Index |
Thread Index |
Old Index