sparc64/5.99.45: panic in init

[Martin Mersberger <gremlin%portal-to-web.de@localhost>]

I've just upgraded my sparc64 to a current build with sources of approx
12:00 UTC yesterday and now it panics in /sbin/init as well as /rescue/init

ie:
ok boot disk netbsd -a
Boot device: /pci@1f,0/pci@1,1/scsi@2/disk@0,0  File and args: netbsd -a
NetBSD IEEE 1275 Multi-FS Bootblock
Version $NetBSD: bootblk.fth,v 1.12 2010/03/11 19:28:55 eeh Exp $
>> NetBSD/sparc64 OpenFirmware Boot, Revision 1.16
Boot: netbsd -a
=0x882488
Loading netbsd: 7855920+533576+311312 [589656+383164]=0x9bc588
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.45 (GENERIC-PF) #0: Sat Feb 12 13:43:56 CET 2011
        root@builder:/usr/obj/sys/arch/sparc64/compile/GENERIC-PF
total memory = 512 MB
avail memory = 489 MB
mainbus0 (root): SUNW,UltraSPARC-IIi-cEngine (Netra t1): hostid 80b2caeb
cpu0 at mainbus0: SUNW,UltraSPARC-IIi @ 440.030 MHz, UPA id 0
cpu0: 16K instruction (32 b/l), 16K data (32 b/l), 2048K external (64 b/l)
psycho0 at mainbus0 addr 0xfffc0000
psycho0: SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 3; PCI bus 0
pci0 at psycho0
ppb0 at pci0 dev 1 function 1: Sun Microsystems Simba PCI Bridge (rev. 0x13)
pci1 at ppb0 bus 1
ebus0 at pci1 dev 1 function 0
ebus0: Sun Microsystems PCIO Ebus2, revision 0x01
auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003,
72c000-72c003, 72f000-72f003
power at ebus0 addr 724000-724003 ipl 37 not configured
SUNW,pll at ebus0 addr 504000-504002 not configured
com0 at ebus0 addr 3803f8-3803ff ipl 28: ns16550a, working fifo
com0: console
com1 at ebus0 addr 3602f8-3602ff ipl 20: ns16550a, working fifo
lpt0 at ebus0 addr 340278-340287, 30015c-30015d, 700000-70000f ipl 34
fdthree at ebus0 addr 3203f0-3203f7, 706000-70600f, 720000-720003 ipl 39
not configured
clock0 at ebus0 addr 0-1fff: mk48t59
flashprom at ebus0 addr 0-fffff not configured
watchdog at ebus0 addr 200000-20003f ipl 4 not configured
display7seg at ebus0 addr 200040-200040 not configured
beeper at ebus0 addr 722000-722003 not configured
flashprom at ebus0 addr 400000-5fffff not configured
flashprom at ebus0 addr 800000-9fffff not configured
pcfiic0 at ebus0 addr 600000-600003 ipl 40
iic0 at pcfiic0: I2C bus
adc at iic0 addr 0x4f not configured
gpio at iic0 addr 0x38 not configured
gpio at iic0 addr 0x39 not configured
pcfiic1 at ebus0 addr 100000-100003 ipl 27
iic1 at pcfiic1: I2C bus
lom0 at ebus0 addr 400000-400063: SUNW,lom: LOMlite rev 2.1
hme0 at pci1 dev 1 function 1: Sun Happy Meal Ethernet, rev. 1
hme0: interrupting at ivec 3021
hme0: Ethernet address 08:00:20:b2:ca:eb
ukphy0 at hme0 phy 1: OUI 0x0006b8, model 0x000c, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ukphy1 at hme0 phy 0: OUI 0x0006b8, model 0x000c, rev. 1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
esiop0 at pci1 dev 2 function 0: Symbios Logic 53c875 (ultra-wide scsi)
esiop0: using on-board RAM
esiop0: interrupting at ivec 1820
scsibus0 at esiop0: 16 targets, 8 luns per target
hme1 at pci1 dev 3 function 1: Sun Happy Meal Ethernet, rev. 1
hme1: interrupting at ivec 301a
hme1: Ethernet address 08:00:20:b2:ca:eb
ukphy2 at hme1 phy 0: OUI 0x0006b8, model 0x000c, rev. 1
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb1 at pci0 dev 1 function 0: Sun Microsystems Simba PCI Bridge (rev. 0x13)
pci2 at ppb1 bus 2
ppb2 at pci2 dev 1 function 0: Digital Equipment DC21150 PCI-PCI Bridge
(rev. 0x04)
pci3 at ppb2 bus 3
cmdide0 at pci3 dev 14 function 0: CMD Technology PCI0646 (rev. 0x03)
cmdide0: primary channel configured to native-PCI mode
cmdide0: using ivec 1802 for native-PCI interrupt
atabus0 at cmdide0 channel 0
cmdide0: secondary channel configured to native-PCI mode
atabus1 at cmdide0 channel 1
pcons at mainbus0 not configured
No counter-timer -- using %tick at 440MHz as system clock.
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <SEAGATE, ST373207LC, 0005> disk fixed
sd0: 70007 MB, 90774 cyl, 2 head, 789 sec, 512 bytes/sect x 143374744
sectors
sd0: sync (50.00ns offset 16), 16-bit (40.000MB/s) transfers, tagged
queueing
sd1 at scsibus0 target 1 lun 0: <SEAGATE, ST373207LC, 0005> disk fixed
sd1: 70007 MB, 90774 cyl, 2 head, 789 sec, 512 bytes/sect x 143374744
sectors
sd1: sync (50.00ns offset 16), 16-bit (40.000MB/s) transfers, tagged
queueing
raid0: RAID Level 1
raid0: Components: /dev/sd0a /dev/sd1a
raid0: Total Sectors: 143374592 (70007 MB)
root device (default raid0a):
dump device (default raid0b):
file system (default generic):
root on raid0a dumps on raid0b
root file system type: ffs
warning: no /dev/console
init path (default /sbin/init): /rescue/init
init: trying /rescue/init
panic: init died (signal 0, exit 11)
Stopped in pid 1.1 (init) at    netbsd:cpu_Debugger+0x4:        nop
db{0}> bt
exit1(b76a000, b00, 0, 0, 0, 0) at netbsd:exit1+0x644
sys_exit(b76a000, c403dc0, c403e00, 723c48, 0, 186a2c8) at
netbsd:sys_exit+0x30
syscall_plain(c403ed0, c403f48, 4553a8, 4553ac, 0, c403dc0) at
netbsd:syscall_pl
ain+0x138
?(b, ffffffffffffffff, 0, 0, 0, 0) at 0x1008c18


kernel is GENERIC (plus lvm2 and pf instead of ipfilter; compiled after
the same cvs update as the userland)

I ran postinstall (as I did a upgrade from 5.99.43 -> .45) and a sh
MAKEDEV all in /dev

As the issue is the same, if I boot the old kernel with the newer
userland and even, if I boot with /rescue/init as init, my guess is
somewhere in the direction of /dev!?


Any ideas?

cheers
 Martin