Re: wm0 doesn't work anymore

["David H. Gutteridge" <dhgutteridge%sympatico.ca@localhost>]

On Sat, 26 Jun 2010 13:35:55 +0200, Kurt Schreiner wrote:
>Hi,
>
>I just build new kernels for my NetBSD virtual machines running on
>MacOSx in VirtualBox and VMwareFusion, respectivly. Both virtualizers
>are configured with (virtual) Intel ethernet adapters and worked w/o
>issues with (customized) 5.99.30 kernels compiled some time ago.
>
>With new kernels (using same customized config files as for the older,
>working kernels) built from -current source cvs updated an hour or so
>ago I get the following (this is from VMware, but same issue with
>VirtualBox):
>
>Jun 26 13:15:26 /netbsd: wm0 at pci2 dev 0 function 0: Intel i82545EM 
>1000BASE-T Ethernet, rev. 1
>Jun 26 13:15:26 /netbsd: wm0: interrupting at ioapic0 pin 18
>Jun 26 13:15:26 /netbsd: wm0: 32-bit 66MHz PCI bus
>Jun 26 13:15:26 /netbsd: wm0: 256 word (8 address bits) MicroWire EEPROM
>
>i.e. the adapter is recognized but there's no MAC address found and
>no PHY is attached anymore. (I tried all three possible Intel adapters
>offered by VirtualBox...)
>
>The respective lines from /var/log/messages with the old kernel booted
>are shown here: both MAC adress and PHY are found...
>
>Jun 26 13:16:32 /netbsd: wm0 at pci2 dev 0 function 0: Intel i82545EM 
>1000BASE-T Ethernet, rev. 1
>Jun 26 13:16:32 /netbsd: wm0: interrupting at ioapic0 pin 18
>Jun 26 13:16:32 /netbsd: wm0: 32-bit 66MHz PCI bus
>Jun 26 13:16:32 /netbsd: wm0: 256 word (8 address bits) MicroWire EEPROM
>Jun 26 13:16:32 /netbsd: wm0: Ethernet address 00:50:56:2d:fa:5f
>Jun 26 13:16:32 /netbsd: makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, 
>rev. 3
>Jun 26 13:16:33 ntpd[327]: Listening on interface #1 wm0, 10.7.76.64#
>
>Any idea anyone where's the culprit?
>
>Kurt

I would guess it was this change:
http://mail-index.netbsd.org/source-changes/2010/06/25/msg011190.html

(But I haven't confirmed that.)

Regards,

Dave