Re: USB 3G modem changes

[Iain Hibbert <plunky%rya-online.net@localhost>]

On Thu, 7 Jan 2010, Tobias Nygren wrote:

> On Thu, 7 Jan 2010 15:50:03 +0100
> Joerg Sonnenberger <joerg%britannica.bec.de@localhost> wrote:
>
> > On Thu, Jan 07, 2010 at 12:01:15PM +0100, Tobias Nygren wrote:
> > > The u3g(4) manpage states that E220 is a supported device.
> > > Why do we have two drivers for the same hardware?
> >
> > If it works correctly with u3g, move it over. It should be tested
> > though.
>
> Seems to work fine on my kit:
>
> u3ginit0 at uhub2 port 2: Switching to 3G mode
> u3ginit0: detached
> u3ginit0: at uhub2 port 2 (addr 2) disconnected
> u3g0 at uhub2 port 2 configuration 1 interface 0
> ucom0 at u3g0 portno 0: 3G Modem
> u3g1 at uhub2 port 2 configuration 1 interface 1
> ucom1 at u3g1 portno 1: 3G Modem
> umass0 at uhub2 port 2 configuration 1 interface 2
> umass0: HUAWEI Technologies HUAWEI Mobile, rev 1.10/0.00, addr 2
> umass0: using SCSI over Bulk-Only
> scsibus0 at umass0: 2 targets, 1 lun per target
> cd0 at scsibus0 target 0 lun 0: <HUAWEI, Mass Storage, 2.31> cdrom
> removable

Same here, and I was getting a match with uhmodem before and a kernel
panic on reattach. The device itself says "Huawei E156G" on the back and
has a Micro SD card slot (which is empty)..


u3ginit0 at uhub4 port 2: Switching to 3G mode
u3ginit0: detached
u3ginit0: at uhub4 port 2 (addr 2) disconnected
u3g0 at uhub4 port 2 configuration 1 interface 0
ucom0 at u3g0 portno 0: 3G Modem
u3g1 at uhub4 port 2 configuration 1 interface 1
ucom1 at u3g1 portno 1: 3G Modem
umass0 at uhub4 port 2 configuration 1 interface 2
umass0: HUAWEI Technology HUAWEI Mobile, rev 2.00/0.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
umass1 at uhub4 port 2 configuration 1 interface 3
cd1 at scsibus0 target 0 lun 0: <HUAWEI, Mass Storage, 2.31> cdrom removable
umass1: HUAWEI Technology HUAWEI Mobile, rev 2.00/0.00, addr 2
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, 1 lun per target
sd0 at scsibus1 target 0 lun 0: <HUAWEI, MMC Storage, 2.31> disk removable
sd0: drive offline
sd0(umass1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd0: unable to open device, error = 19


regards,
iain