Re: ral driver is not working

[HugLeo <hugocanalli%gmail.com@localhost>]

Are there alternatives to ral driver included in NetBSD 5.0?

On Wed, May 13, 2009 at 9:33 AM, Guilherme Covolo 
<smyows%youare.not.br@localhost> wrote:
> my intel 3945 do not work too
>
> wpi0: fatal firmware error
>
> i'm using netbsd 5.99.11 (amd64) and current pkgsrc with wpi-firmware2,
> before at netbsd 5.99.7 all works perfectly.
>
> Guilherme Covolo
>
>
> HugLeo escreveu:
>
> Yes.
>
> I think there are a bug.
>
> I did a problem report here
> http://www.netbsd.org/cgi-bin/query-pr-single.pl?number=41388
>
> On Tue, May 12, 2009 at 3:13 AM, Piotr Adamus 
> <panpiotradamus%gmail.com@localhost>
> wrote:
>
>
> I may report the same for Linksys PCI wifi (aslo ralink). I can set all
> parameters, sometimes scan the network but I cannot connect to the AP. On
> NetBSD 4 everything was just fine. I don't know what is going on.
>
> Rgrds,
>
> Piotr
>
> On Mon, May 11, 2009 at 11:31 PM, HugLeo <hugocanalli%gmail.com@localhost> 
> wrote:
>
>
> Hi.
>
> I don't need use wpa or wep. My ISP filter by MAC Addresses.
>
> On Mon, May 11, 2009 at 3:04 PM, Francisco Valladolid 
> <ficovh%gmail.com@localhost>
> wrote:
>
>
> Hi,
>
> Are you using wpa or wep authentication ?
>
> for WEP :
>
> # ifconfig ral0 nwid <my_ap> nwkey 0x1234567890
> # dhcpcd ral0
>
> for WPA, WPA2 it can do via wpa_supplicant
>
> Create or edit /etc/wpa_supplicant.conf
>
> ctrl_interface=/var/run/wpa_supplicant
> ctrl_interface_group=wheel
>
> network {
> ÂÂÂÂÂ ssid=myhomewlan
> ÂÂÂÂÂ scan_ssid=1
> ÂÂÂÂÂ key_mgmt=WPA-PSK
> ÂÂÂÂÂ psk="some_wpa_key"
> }
>
> then initi wpa_suppplicant
>
> # wpa_supplicant -iral0 -B -c/etc/wpa_supplicant.conf
>
> for wpa key, you can use
> wpa_passphrase(8)
>
> Best Regards.
>
>
>
>
>
> On Tue, May 5, 2009 at 9:34 PM, HugLeo <hugocanalli%gmail.com@localhost> 
> wrote:
>
>
> Hi
>
> I'm using a PCI D-Link DWL G510 (Ralink Chipset). NetBSD detect like
> ral0
> and I can set options, by instance:
>
> ifconfig ral0 192.168.1.2 nwid MyNetwork
>
> But I get no network.
>
> I also use:
> wiconfig ral0 -D
> But detect no access point.
>
> I've tried use wpa_supplicant with ap in monitor mode but I also don't
> get
> success.
>
> dmesg detect: ral0 at pci 1 dev 9 function 0: vendor 0x1814 product
> 0x0302
> ral0 interrupting at ioapic 0 pin 17
> ral0 MACIBBP RT2561C, RF RT2527
>
> Any ideas?
> --
> -hUgLeO-â
>
>
> --
> Francisco Valladolid H.
> -- http://bsdguy.net - Jesus Christ follower.
>
>
>
> --
> -hUgLeO-â
>
>
>
>
>
>
>



-- 
-hUgLeO-â