[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: Disabling ACPI also implicitly disables SMP support for Intel Atom chips?
On Thu, 5 Mar 2009 08:23:59 -0500, Steven M. Bellovin wrote:
From: "Steven M. Bellovin" <smb%cs.columbia.edu@localhost>
To: "David H. Gutteridge" <dhgutteridge%sympatico.ca@localhost>
CC: current-users%NetBSD.org@localhost, ad%NetBSD.org@localhost, jmcneill%invisible.ca@localhost,
Subject: Re: Disabling ACPI also implicitly disables SMP support for Intel
Date: Thu, 5 Mar 2009 08:23:59 -0500
On Wed, 04 Mar 2009 23:27:55 -0500
"David H. Gutteridge" <dhgutteridge%sympatico.ca@localhost> wrote:
> On Wed, 04 Mar 2009 22:25:35 -0500, David H. Gutteridge wrote:
> >The main problem I've found so far with ACPI being enabled (I've only
> >been using this machine a few days) is that the Ethernet card doesn't
> >work. With ACPI, the card doesn't seem to transmit any packets, and
> >every few seconds I see the following output to the console:
> >re0: watchdog timeout
> >re0: reset never completed!
> >If I disable ACPI, the re(4) card works fine.
> Following up on my own comments, I found another NetBSD user's
> comments instructive. Martijn van Buul had written: "I'm having
> problems with either my network adapter, or my keyboard. I get to
> choose; if I disable ACPI, my ethernet adapter will work just fine
> but my keyboard won't, if I enable ACPI my keyboard will work, but my
> ethernet won't. The peculiar thing is that *both* worked at the same
> time during installation." (In his case he's using an Acer Aspire
> One.) Like me, his dmesg has the "watchdog timeout" errors at the
> end, and like me, he's using an re(4) card.
> I thought back to my install, and remembered I'd noted the same thing:
> the GENERIC kernel I'd booted during install had ACPI enabled, I
> believe. The re(4) card had worked fine then for me too, as I'd
> transferred files via ftp with it. I guessed that somehow configuring
> the card during the boot process rather than afterward was triggering
> this "watchdog timeout" problem.
> So I removed my /etc/ifconfig.re0 file, rebooted with ACPI on,
> manually brought up the interface, manually added the default route,
> and voila, re(4) works fine. So that seems to be the workaround for
> people who absolutely want both HT and re(4) on these little devils
> (pun intended when they're running a BSD).
Hmm... You implied you were using X, as I recall. One thing I've seen
when starting up X is that interrupts are disabled for too long during
startup, causing "fatal firmware errors" on wpi0. Until I started
running wpa_supplicant, I had to do 'ifconfig wpi0 down up' once I was
in X. I wonder if you're seeing something similar.
I do run X sometimes, but it isn't started after the boot process. I
don't use (x|g|k)dm, I only invoke "startx" when I need to. The
problem I'm seeing happens when booting finishes off at a text console.
Main Index |
Thread Index |