Re: panic: biodone2 already

[Thomas Klausner <wiz%NetBSD.org@localhost>]

On Sun, Sep 14, 2008 at 12:51:15PM +0200, Juergen Hannken-Illjes wrote:
> Ok, so there is no UDF involved and a plain vanilla kernel hangs writing
> a DVD.

Ah, that explains the two hangs I had writing a DVD on Sunday.
Further problem was that the machine wouldn't boot after the second
hang, because wd0's block 0 seems to have died.

Using an install CD and scan_ffs, I got back the MBR and disklabel
(from /var/backups/work, thank you for that!) by finding the file
system again. Then I used fdisk to restore the MBR and install a new
boot loader.

During the next boot, all seemed fine until the kernel started, then
it had lost interrupts and ran into wd0 timeouts reading block zero.

I guess it might be broken hardware, or is there something in that
kernel version (amd64-4.99.72/20080910) that might cause such
symptoms?

dmesg attached.

Cheers,
 Thomas

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.72 (HIRO64) #4: Wed Sep 10 17:43:03 CEST 2008
        
wiz%hiro.nih.at@localhost:/disk/wd4a/archive/cvs/src/sys/arch/amd64/compile/obj/HIRO64
total memory = 2046 MB
avail memory = 1972 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SMBIOS rev. 2.4 @ 0xf0000 (75 entries)
System manufacturer System Product Name (System Version)
mainbus0 (root)
cpu0 at mainbus0 apid 0: AMD 686-class, 2210MHz, id 0x40ff2
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 11, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <Nvidia,AWRDACPI,42302e31>, AslId <AWRD,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpi: activated PNP0C0F
acpi: activated PNP0C0F
acpi: activated PNP0C0F
acpi: activated PNP0C0F
acpi: activated PNP0C0F
acpi: activated PNP0C0F
acpi: activated PNP0C0F
acpi: activated PNP0C0F
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
aiboost0 at acpi0 (ASOC, ATK0110-16843024)
aiboost0: ASUS AI Boost Hardware monitor
attimer0 at acpi0 (TMR, PNP0100): AT Timer
attimer0: io 0x40-0x43
hpet0 at acpi0 (HPET, PNP0103)
hpet0: mem 0xfefff000-0xfefff3ff irq 0,8
timecounter: Timecounter "hpet0" frequency 25000000 Hz quality 2000
pcppi0 at acpi0 (SPKR, PNP0800)
pcppi0: io 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
fdc0 at acpi0 (FDC0, PNP0700)
fdc0: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
com0 at acpi0 (UAR1, PNP0501-1)
com0: io 0x3f8-0x3ff irq 4
com0: ns16550a, working fifo
lpt0 at acpi0 (LPT1, PNP0400-1)
lpt0: io 0x378-0x37f irq 7
FAN (PNP0C0B) [ACPI Fan] at acpi0 not configured
acpitz0 at acpi0 (THRM): active cooling level 0: 73.0C critical 75.0C passive 
40.0C
attimer0: attached to pcppi0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
NVIDIA nForce MCP55 Memory Controller (RAM memory, revision 0xa1) at pci0 dev 0 
function 0 not configured
pcib0 at pci0 dev 1 function 0
pcib0: NVIDIA product 0x0360 (rev. 0xa2)
nfsmbc0 at pci0 dev 1 function 1: NVIDIA nForce MCP55 SMBus Controller (rev. 
0xa2)
nfsmb0 at nfsmbc0 SMBus 1
iic0 at nfsmb0: I2C bus
spdmem0 at iic0 addr 0x51
spdmem0: DDR2 SDRAM memory, data ECC, 1024MB, 667MHz, PC2-5300
spdmem0: 14 rows, 10 cols, 2 ranks, 4 banks/chip, 3.00ns cycle time
spdmem0: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing)
spdmem1 at iic0 addr 0x53
spdmem1: DDR2 SDRAM memory, data ECC, 1024MB, 667MHz, PC2-5300
spdmem1: 14 rows, 10 cols, 2 ranks, 4 banks/chip, 3.00ns cycle time
spdmem1: voltage SSTL 1.8V, refresh time 7.8us (self-refreshing)
nfsmb1 at nfsmbc0 SMBus 2
iic1 at nfsmb1: I2C bus
NVIDIA nForce MCP55 Memory Controller (RAM memory, revision 0xa2) at pci0 dev 1 
function 2 not configured
ohci0 at pci0 dev 2 function 0: NVIDIA nForce MCP55 OHCI USB Controller (rev. 
0xa1)
APCF: Picked IRQ 20 with weight 0
ohci0: interrupting at ioapic0 pin 20
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 2 function 1: NVIDIA nForce MCP55 EHCI USB Controller (rev. 
0xa2)
APCL: Picked IRQ 21 with weight 0
ehci0: interrupting at ioapic0 pin 21
ehci0: EHCI version 1.0
ehci0: companion controller, 10 ports each: ohci0
usb1 at ehci0: USB revision 2.0
viaide0 at pci0 dev 4 function 0
viaide0: NVIDIA MCP55 IDE Controller (rev. 0xa1)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel ignored (disabled)
viaide1 at pci0 dev 5 function 0
viaide1: NVIDIA MCP55 Serial ATA Controller (rev. 0xa2)
viaide1: bus-master DMA support present
viaide1: primary channel wired to native-PCI mode
APSI: Picked IRQ 22 with weight 0
viaide1: using ioapic0 pin 22 for native-PCI interrupt
atabus1 at viaide1 channel 0
viaide1: secondary channel wired to native-PCI mode
atabus2 at viaide1 channel 1
viaide2 at pci0 dev 5 function 1
viaide2: NVIDIA MCP55 Serial ATA Controller (rev. 0xa2)
viaide2: bus-master DMA support present
viaide2: primary channel wired to native-PCI mode
APSJ: Picked IRQ 23 with weight 0
viaide2: using ioapic0 pin 23 for native-PCI interrupt
atabus3 at viaide2 channel 0
viaide2: secondary channel wired to native-PCI mode
atabus4 at viaide2 channel 1
viaide3 at pci0 dev 5 function 2
viaide3: NVIDIA MCP55 Serial ATA Controller (rev. 0xa2)
viaide3: bus-master DMA support present
viaide3: primary channel wired to native-PCI mode
ASA2: Picked IRQ 20 with weight 1
viaide3: using ioapic0 pin 20 for native-PCI interrupt
atabus5 at viaide3 channel 0
viaide3: secondary channel wired to native-PCI mode
atabus6 at viaide3 channel 1
ppb0 at pci0 dev 6 function 0: NVIDIA nForce MCP55 PCI-PCI Bridge (rev. 0xa2)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
wi0 at pci1 dev 6 function 0: Intersil PRISM2.5 Mini-PCI WLAN (rev. 0x01)
APC1: Picked IRQ 16 with weight 0
wi0: interrupting at ioapic0 pin 16
wi0: 802.11 address 00:09:5b:2f:0e:76
wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
wi0: Intersil Firmware: Primary (1.0.7), Station (1.3.6)
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wm0 at pci1 dev 7 function 0: Intel i82541PI 1000BASE-T Ethernet, rev. 5
APC2: Picked IRQ 17 with weight 0
wm0: interrupting at ioapic0 pin 17
wm0: 32-bit 33MHz PCI bus
wm0: 64 word (6 address bits) MicroWire EEPROM
wm0: Ethernet address 00:0e:0c:b5:53:ac
igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
azalia0 at pci0 dev 6 function 1: Generic High Definition Audio Controller
AAZA: Picked IRQ 21 with weight 1
azalia0: interrupting at ioapic0 pin 21
azalia0: host: NVIDIA nForce MCP55 High Definition Audio Controller (rev. 162), 
HDA rev. 1.0
nfe0 at pci0 dev 8 function 0: NVIDIA nForce MCP55 Gigabit Ethernet Controller 
(rev. 0xa2)
APCH: Picked IRQ 22 with weight 1
nfe0: interrupting at ioapic0 pin 22
nfe0: Ethernet address 00:17:31:8e:ff:30
makphy0 at nfe0 phy 1: Marvell 88E1116 Gigabit PHY, rev. 1
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ppb1 at pci0 dev 10 function 0: NVIDIA product 0x0376 (rev. 0xa2)
pci2 at ppb1 bus 2
pci2: no spaces enabled!
ppb2 at pci0 dev 11 function 0: NVIDIA product 0x0374 (rev. 0xa2)
pci3 at ppb2 bus 3
pci3: no spaces enabled!
ppb3 at pci0 dev 12 function 0: NVIDIA product 0x0374 (rev. 0xa2)
pci4 at ppb3 bus 4
pci4: no spaces enabled!
ppb4 at pci0 dev 13 function 0: NVIDIA product 0x0378 (rev. 0xa2)
pci5 at ppb4 bus 5
pci5: no spaces enabled!
ppb5 at pci0 dev 14 function 0: NVIDIA product 0x0375 (rev. 0xa2)
pci6 at ppb5 bus 6
pci6: no spaces enabled!
ppb6 at pci0 dev 15 function 0: NVIDIA nForce MCP55 PCI-Express 16x Port (rev. 
0xa2)
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci7 dev 0 function 0: NVIDIA product 0x01df (rev. 0xa1)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
pchb0 at pci0 dev 24 function 0
pchb0: Advanced Micro Devices K8 AMD64 HyperTransport configuration (rev. 0x00)
pchb1 at pci0 dev 24 function 1
pchb1: Advanced Micro Devices K8 AMD64 Address Map configuration (rev. 0x00)
pchb2 at pci0 dev 24 function 2
pchb2: Advanced Micro Devices K8 AMD64 DRAM configuration (rev. 0x00)
amdtemp0 at pci0 dev 24 function 3
amdtemp0: AMD CPU Temperature Sensors (K8: core rev DH-F2)
isa0 at pcib0
itesio0 at isa0 port 0x2e-0x2f: iTE IT8716F Super I/O (rev 0)
itesio0: Hardware Monitor registers at 0x290
itesio0: Watchdog Timer present
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
fd1 at fdc0 drive 1: density unknown
azalia0: codec[0]: Analog Devices AD1988B (rev. 2.0), HDA rev. 1.0
audio0 at azalia0: full duplex, independent
uhub0 at usb0: NVIDIA OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
uhub1 at usb1: NVIDIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
IPsec: Initialized Security Association Processing.
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GSA-4040B, K263A9I0519, A300> cdrom 
removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd1 at atapibus0 drive 1: <PLEXTOR DVD-ROM PX-130A, , 1.01> cdrom removable
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
cd1(viaide0:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
viaide1 port 0: device present, speed: 3.0Gb/s
viaide1 port 1: device present, speed: 1.5Gb/s
viaide2 port 0: device present, speed: 3.0Gb/s
viaide2 port 1: device present, speed: 3.0Gb/s
viaide3 port 0: device present, speed: 1.5Gb/s
viaide3 port 1: device present, speed: 3.0Gb/s
wd0 at atabus1 drive 0: <Hitachi HUA721050KLA330>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus2 drive 0: <HDS722525VLSA80>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd1(viaide1:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
wd2 at atabus3 drive 0: <SAMSUNG HD501LJ>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd2: 32-bit data port
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7
wd2(viaide2:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd3 at atabus4 drive 0: <SAMSUNG HD501LJ>
wd3: drive supports 16-sector PIO transfers, LBA48 addressing
wd3: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd3: 32-bit data port
wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7
wd3(viaide2:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd4 at atabus5 drive 0: <WDC WD4000YR-01PLB0>
wd4: drive supports 16-sector PIO transfers, LBA48 addressing
wd4: 372 GB, 775221 cyl, 16 head, 63 sec, 512 bytes/sect x 781422768 sectors
wd4: 32-bit data port
wd4: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd4(viaide3:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd5 at atabus6 drive 0: <SAMSUNG HD103UJ>
wd5: drive supports 16-sector PIO transfers, LBA48 addressing
wd5: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd5: 32-bit data port
wd5: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7
wd5(viaide3:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
uhub2 at uhub0 port 1: Genesys Logic USB Hub, class 9/0, rev 1.10/3.05, addr 2
uhub2: 4 ports with 4 removable, self powered
raid1: RAID Level 5
raid1: Components: /dev/wd1h /dev/wd3e /dev/wd2h
raid1: Total Sectors: 40965504 (20002 MB)
raid2: RAID Level 1
raid2: Components: /dev/wd0g /dev/wd4e
raid2: Total Sectors: 307200384 (150000 MB)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
umass0 at uhub2 port 1 configuration 1 interface 0
umass0: ChipsBar USB Reader, rev 2.00/1.00, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <ChipBank, SD/MM Reader, 4080> disk removable
sd0: drive offline
sd0(umass0:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd0: unable to open device, error = 19
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 1.10/3.00, 
addr 4, iclass 3/1
ums0 at uhidev0: 5 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 3 configuration 1 interface 0
uhidev1: vendor 0x099a USB Keyboard, rev 1.10/1.00, addr 5, iclass 3/1
ukbd0 at uhidev1
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
tap0: Ethernet address f2:0b:a4:2f:56:01
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)