WARNING: module error: builtin module `putter' failed to init

[Adam Hoka <adam.hoka%gmail.com@localhost>]

After compiling a custom kernel I have found the following in my dmesg:

 WARNING: module error: builtin module `drm' failed to init
 WARNING: module error: builtin module `putter' failed to init

After that, trying to mount an sshfs resulted in an ugly panic.
Is this just some API change and I need to wait till that part of the code 
catches up,
or some other issue?

My custom config:

>>>>>>
include         "arch/i386/conf/GENERIC"

options         VGA_POST
options         X86EMU

file-system     UDF
file-system     PUFFS
pseudo-device   putter

radeondrm* at vga?
<<<<<<

Full dmesg follows:
>>>>>>
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.63 (GRIMNISMAL) #0: Tue May 27 01:09:05 CEST 2008
        
replaced%grimnismal.regius.local@localhost:/tnf/build/obj/sys/arch/i386/compile/GRIMNISMAL
total memory = 511 MB
avail memory = 488 MB
WARNING: module error: builtin module `putter' failed to init
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
    ( )
mainbus0 (root)
cpu0 at mainbus0: Intel 686-class, 1703MHz, id 0xf13
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <AWARD ,AWRDACPI,42302e31>, AslId <AWRD,00000000>
mpacpi: could not get bus number, assuming bus 0
acpi_pci_link: WARNING: powerhook_establish is deprecated
acpi_pci_link: WARNING: powerhook_establish is deprecated
acpi_pci_link: WARNING: powerhook_establish is deprecated
acpi_pci_link: WARNING: powerhook_establish is deprecated
LNKA: ACPI: Found matching pin for 0.12.INTA at func 0: 12
LNKD: ACPI: Found matching pin for 0.13.INTA at func 0: 11
acpi_pci_link: WARNING: powerhook_establish is deprecated
LNKH: ACPI: Found matching pin for 0.2.INTA at func 3: 5
acpi_pci_link: WARNING: powerhook_establish is deprecated
acpi_pci_link: WARNING: powerhook_establish is deprecated
LNKE: ACPI: Found matching pin for 0.2.INTD at func 2: 9
acpi_pci_link: WARNING: powerhook_establish is deprecated
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (FUTS, PNP0C0E): ACPI Sleep Button
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
FDC0 (PNP0700) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
ECP1 (PNP0401) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
mpu0 at acpi0 (MIDI, PNPB006)
mpu0: io 0x330-0x331 irq 10
midi1 at mpu0: Roland MPU-401 MIDI UART (CPU-intensive output)
joy0 at acpi0 (GAME, PNPB02F)
joy0: io 0x201
joy0: joystick not connected
FAN (PNP0C0B) at acpi0 not configured
acpitz0 at acpi0 (THRM): active cooling level 0: 68.0C critical 70.0C passive 
35.0C
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1039 product 0x0646 (rev. 0x00)
agp0 at pchb0: aperture at 0xe8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: vendor 0x1039 product 0x0001 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: vendor 0x1002 product 0x514c (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
radeondrm0 at vga1: ATI Radeon QL R200 8500 LE (unit 0)
radeondrm0: AGP at 0xe8000000 64MB
radeondrm0: Initialized radeon 1.26.0 20060524
pcib0 at pci0 dev 2 function 0
pcib0: vendor 0x1039 product 0x0008 (rev. 0x10)
ohci0 at pci0 dev 2 function 2: vendor 0x1039 product 0x7001 (rev. 0x07)
ohci0: interrupting at irq 9
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 2 function 3: vendor 0x1039 product 0x7001 (rev. 0x07)
ohci1: interrupting at irq 5
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
siside0 at pci0 dev 2 function 5
siside0: Silicon Integrated Systems 645DX IDE controller (rev. 0xd0)
siside0: bus-master DMA support present
siside0: primary channel wired to compatibility mode
siside0: primary channel interrupting at irq 14
atabus0 at siside0 channel 0
siside0: secondary channel wired to compatibility mode
siside0: secondary channel interrupting at irq 15
atabus1 at siside0 channel 1
emuxki0 at pci0 dev 12 function 0: vendor 0x1102 product 0x0002 (audio 
multimedia, revision 0x08)
emuxki0: interrupting at irq 12
emuxki0: ac97: SigmaTel STAC9721/23 codec; 18 bit DAC, 18 bit ADC, SigmaTel 3D
emuxki0: ac97: ext id 200<AMAP>
audio0 at emuxki0: full duplex, mmap, independent
joy1 at pci0 dev 12 function 1: vendor 0x1102 product 0x7002 (rev 0x08)
joy1: joystick not connected
rtk0 at pci0 dev 13 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at irq 11
rtk0: Ethernet address 00:0a:e6:7e:18:c4
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 0x1039 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 0x1039 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
WARNING: module error: builtin module `drm' failed to init
WARNING: module error: builtin module `putter' failed to init
WARNING: module error: builtin module `putter' failed to init
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Genius NetScroll + Traveler, rev 1.10/1.10, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
wd0 at atabus0 drive 0: <Maxtor 6E040L0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 39205 MB, 79656 cyl, 16 head, 63 sec, 512 bytes/sect x 80293248 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(siside0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <TSSTcorp CDW/DVD SH-M522C, , TS04> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(siside0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
Too many symbols for tree, skipping 3621 symbols
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs

--
Adam