Re: 4.99.49 boot panic on my laptop...

["Martin S. Weber" <Ephaeton%gmx.net@localhost>]

On Mon, Apr 21, 2008 at 09:51:19AM +0100, Iain Hibbert wrote:
> On Wed, 16 Apr 2008, Martin S. Weber wrote:
> >((...))
> > Ian Hibbert? Interestingly enough he also has a Toshiba :)
> 
> yes, I am [still] seeing the same issue
> 
> does "boot -c" and "disable acpi" work for you?  It does get me past that
> acpi issue and the pci_link_route panic but something else hangs up a bit
> further in (I think around the time that disks get probed)

First of all pardon for gulping one of your 'i's. (IaIn..)

Ha!

Now that's a good hint. It boots successfully for me and seems working
with boot -c and disable acpi (nothing else).  Here's some dmesg info
from booting into 4.99.52 (for comparison) and 4.99.60 with acpi
disabled. I suppose given the cbb messages cardbus/pcmcia(?) stuff
would not work without acpi?

And now for the first time I'm seeing these similar error messages
from 4.66.52 as does .60 emit. Hrm... I've left them in the highlight.

-Martin


NetBSD 4.99.52 (GENERIC) #0: Mon Feb  4 13:19:18 CET 2008
(...)
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20070320
acpi0: X/RSDT: OemId <TOSHIB,750     ,00970814>, AslId <TASM,04010000>
mpacpi: could not get bus number, assuming bus 0
acpi_pci_link: WARNING: powerhook_establish is deprecated
LNKA: ACPI: Found matching pin for 0.11.INTA at func 0: 255
acpi_pci_link: WARNING: powerhook_establish is deprecated
LNKB: ACPI: Found matching pin for 0.11.INTB at func 1: 255
acpi_pci_link: WARNING: powerhook_establish is deprecated
LNKC: ACPI: Found matching pin for 0.9.INTA at func 0: 11
LNKC: ACPI: Found matching pin for 0.4.INTA at func 0: 11
acpi_pci_link: WARNING: powerhook_establish is deprecated
LNKB: ACPI: Found matching pin for 0.0.INTB at func 1: 11
LNKD: ACPI: Found matching pin for 0.7.INTD at func 2: 11
LNKC: ACPI: Found matching pin for 1.4.INTA at func 0: 11
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
CPU0 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
LNKA (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKB (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKC (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKD (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
MEM (PNP0C01) [System Board] at acpi0 not configured
PCI0 (PNP0A03) [PCI/PCI-X Host Bridge] at acpi0 not configured
DMAC (PNP0200) [AT DMA Controller] at acpi0 not configured
PIC (PNP0000) [AT Interrupt Controller] at acpi0 not configured
(...)
cbb0 at pci0 dev 11 function 0: Toshiba ToPIC100 PCI-CardBus Bridge (rev. 0x20)
cbb1 at pci0 dev 11 function 1: Toshiba ToPIC100 PCI-CardBus Bridge (rev. 0x20)
cbb0: cacheline 0x0 lattimer 0x40
cbb0: bhlc 0x824000
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 20
pcmcia0 at cardslot0
cbb1: cacheline 0x0 lattimer 0x40
cbb1: bhlc 0x824000
cbb1: interrupting at irq 11
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 21
pcmcia1 at cardslot1
(...)
syncing disks... done
unmounting file systems... done
rebooting...
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.60 (GENERIC) #1: Sat Apr 19 22:36:17 CEST 2008
        root%circe.entropie.net@localhost:/src/obj/sys/arch/i386/compile/GENERIC
total memory = 191 MB
avail memory = 176 MB
timecounter: Timecounters tick every 10.000 msec
userconf: configure system autoconfiguration:
uc> disable acpi
[510] acpi0 disabled
uc> quit
Continuing...
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
TOSHIBA P3440 (Version 1.0)
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium III (686-class), 500.05 MHz, id 0x681
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383f9ff<FXSR,SSE>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 256 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: Initial APIC ID 0
cpu0: Cluster/Package ID 0
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443MX Host Bridge/Controller (rev. 0x01)
auich0 at pci0 dev 0 function 1: i82440MX AC-97 Audio
auich0: interrupting at irq 11
auich0: DMA bug workaround enabled
auich0: ac97: SigmaTel STAC9744/45 codec; 18 bit DAC, 18 bit ADC, SigmaTel 3D
auich0: ac97: ext id 201<AMAP,VRA>
vga1 at pci0 dev 4 function 0: S3 Savage/IX+MV (rev. 0x11)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
direct rendering for vga1 unsupported
ppb0 at pci0 dev 6 function 0: Toshiba product 0x061b (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
fxp0 at pci1 dev 4 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at irq 11
fxp0: Ethernet address 00:00:39:30:12:20
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Intel 82443MX PCI-ISA Bridge (miscellaneous bridge, revision 0x01) at pci0 dev 
7 function 0 not configured
piixide0 at pci0 dev 7 function 1
piixide0: Intel 82440MX IDE controller (rev. 0x00)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel ignored (disabled)
uhci0 at pci0 dev 7 function 2: Intel 82443MX USB Host Controller (rev. 0x00)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
piixpm0 at pci0 dev 7 function 3
piixpm0: Intel 82443MX Power Management Controller (rev. 0x00)
piixpm0: interrupting at SMI
iic0 at piixpm0: I2C bus
oboe0 at pci0 dev 9 function 0: Toshiba Fast Infrared Type O, revision 0
oboe0: interrupting at irq 11
irframe0 at oboe0: SIR, MIR, FIR
cbb0 at pci0 dev 11 function 0: Toshiba ToPIC100 PCI-CardBus Bridge (rev. 0x20)
cbb1 at pci0 dev 11 function 1: Toshiba ToPIC100 PCI-CardBus Bridge (rev. 0x20)
cbb0: cacheline 0x0 lattimer 0x40
cbb0: bhlc 0x824000
pci_intr_map: no mapping for pin A (line=ff)
cbb0: couldn't map interrupt
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 20
pcmcia0 at cardslot0
cbb1: cacheline 0x0 lattimer 0x40
cbb1: bhlc 0x824000
pci_intr_map: no mapping for pin B (line=ff)
cbb1: couldn't map interrupt
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 21
pcmcia1 at cardslot1
isa0 at mainbus0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
attimer0: attached to pcppi0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
auich0: measured ac97 link rate at 48000 Hz
audio0 at auich0: full duplex, mmap, independent
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: vendor 0x15d9 USB Mouse, rev 1.10/1.00, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
wd0 at atabus0 drive 0: <SAMSUNG HM160HC>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs