Re: ACPICA update to 20080321

[Geoff Wing <gcw%pobox.com@localhost>]

I can't boot with this update (from CVS) :-(

It's normally giving me:

        fdc0: ...
        SIOR
        RMSC
        aiboost0 at acpi (....)
        aiboost0 ....
        panic: free: addr 0xc04bba6a not with kmem_map

It might be dying on the aiboost or the hpet or something totally unrelated.
I have been able to get a couple of other crashes with printed out "deadbebf"
or some other mangled deadbeef variants around "pci0 ..." or "pci1 ..." type
lines.

MB is ASUS P5K3 Deluxe with C2D E6850.

Changing setup ACPI settings didn't help.

I haven't investigated enough to have any other clues at the moment.

Regards,
Geoff

NetBSD 4.99.58 (G) #0: Thu Apr 10 13:34:56 EST 2008
        gcw%g.primenet.com.au@localhost:/usr/netbsd/src/sys/arch/i386/compile/G
total memory = 2047 MB
avail memory = 2003 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
System manufacturer P5K3 Deluxe (System Version)
mainbus0 (root)
cpu0 at mainbus0 apid 0: (boot processor)
cpu0: Intel Core 2 (Merom) (686-class), 3005.66 MHz, id 0x6fb
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 
e3fd<SSE3,DTES64,MONITOR,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
cpu0: features3 20100000<XD,EM64T>
cpu0: "Intel(R) Core(TM)2 Duo CPU     E6850  @ 3.00GHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu0: L2 cache 4 MB 64B/line 16-way
cpu0: ITLB 128 4 KB entries 4-way
cpu0: using thermal monitor 1
cpu0: Initial APIC ID 0
cpu0: Cluster/Package ID 0
cpu0: Core ID 0
cpu0: calibrating local timer
cpu0: apic clock running at 334 MHz
cpu0: 64 page colors
cpu1 at mainbus0 apid 1: (application processor)
cpu1: Intel Core 2 (Merom) (686-class), 3005.76 MHz, id 0x6fb
cpu1: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu1: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu1: features2 
e3fd<SSE3,DTES64,MONITOR,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
cpu1: features3 20100000<XD,EM64T>
cpu1: "Intel(R) Core(TM)2 Duo CPU     E6850  @ 3.00GHz"
cpu1: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu1: L2 cache 4 MB 64B/line 16-way
cpu1: ITLB 128 4 KB entries 4-way
cpu1: using thermal monitor 1
cpu1: Initial APIC ID 1
cpu1: Cluster/Package ID 0
cpu1: Core ID 1
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20070320
acpi0: X/RSDT: OemId <A_M_I_,OEMXSDT ,12000721>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
CPU1 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU2 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU3 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU4 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
PCI0 (PNP0A08) [PCI Express/PCI-X Mode-2 Host Bridge] at acpi0 not configured
MCH (PNP0C01) [System Board] at acpi0 not configured
PIC (PNP0000) [AT Interrupt Controller] at acpi0 not configured
DMAD (PNP0200) [AT DMA Controller] at acpi0 not configured
attimer0 at acpi0 (TMR, PNP0100): AT Timer
attimer0: io 0x40-0x43 irq 0
RTC0 (PNP0B00) [AT Real-Time Clock] at acpi0 not configured
pcppi0 at acpi0 (SPKR, PNP0800)
pcppi0: io 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at acpi0 (COPR, PNP0C04)
npx0: io 0xf0-0xff irq 13
npx0: reported by CPUID; using exception 16
fdc0 at acpi0 (FDC, PNP0700)
fdc0: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
fdc0: expected BUFFER, got 4
SIOR (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not 
configured
RMSC (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not 
configured
aiboost0 at acpi0 (ASOC, ATK0110-16843024)
aiboost0: ASUS AI Boost Hardware monitor
hpet0 at acpi0 (HPET, PNP0103)
hpet0: mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
com0 at acpi0 (UAR1, PNP0501-1)
com0: io 0x3f8-0x3ff irq 4
com0: ns16550a, working fifo
OMSC (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not 
configured
pckbc0 at acpi0 (PS2K, PNP0303): kbd port
pckbc0: io 0x60,0x64 irq 1
PCIE (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not 
configured
MBT4 (PNP0C32) at acpi0 not configured
RMEM (PNP0C01) [System Board] at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
LNKA (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKB (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKC (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKD (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKF (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKG (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKH (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
attimer0: attached to pcppi0
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pmsprobe: reset error 5
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82G33/P35 Host Bridge (rev. 0x02)
agp0 at pchb0: can't find internal VGA device config space
ppb0 at pci0 dev 1 function 0: Intel 82G33 PCI Express Port (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci1 dev 0 function 0: NVIDIA product 0x0402 (rev. 0xa1)
vga0: WARNING: ignoring 64-bit BAR @ 0x14
vga0: WARNING: ignoring 64-bit BAR @ 0x1c
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
direct rendering for vga0 unsupported
uhci0 at pci0 dev 26 function 0: Intel 82801I USB UHCI Controller (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16 (irq 11)
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: Intel 82801I USB UHCI Controller (rev. 0x02)
uhci1: interrupting at ioapic0 pin 21 (irq 3)
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 26 function 2: Intel 82801I USB UHCI Controller (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18 (irq 5)
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 26 function 7: Intel 82801I USB EHCI Controller (rev. 0x02)
ehci0: interrupting at ioapic0 pin 18 (irq 5)
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 22 (irq 15)
azalia0: host: Intel 82801I High Definition Audio Controller (rev. 2)
azalia0: host: High Definition Audio rev. 1.0
ppb1 at pci0 dev 28 function 0: Intel 82801I PCI Express Port #1 (rev. 0x02)
pci2 at ppb1 bus 4
pci2: memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 4: Intel 82801I PCI Express Port #5 (rev. 0x02)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
jmide0 at pci3 dev 0 function 0: JMicron Technology JMB363 SATA/PATA controller
jmide0: 1 PATA port, 2 SATA ports
jmide0: interrupting at ioapic0 pin 16 (irq 11)
ahcisata0 at jmide0
ahcisata0: AHCI revision 1.0, 2 ports, 32 command slots, features 0xc722e000
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
jmide0: PCI IDE interface used
jmide0: bus-master DMA support present
jmide0: primary channel wired to native-PCI mode
jmide0: primary channel is unused
jmide0: secondary channel wired to native-PCI mode
jmide0: secondary channel is PATA
atabus2 at jmide0 channel 1
ppb3 at pci0 dev 28 function 5: Intel 82801I PCI Express Port #6 (rev. 0x02)
pci4 at ppb3 bus 2
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
mskc0 at pci4 dev 0 function 0mskc0: interrupt moderation is 0 us
, Yukon-2 EC Ultra rev. A1 (0x2): ioapic0 pin 17 (irq 10)
msk0 at mskc0 port A: Ethernet address 00:1b:fc:22:d7:43
ukphy0 at msk0 phy 0: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000ac2, model 0x000b, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
uhci3 at pci0 dev 29 function 0: Intel 82801I USB UHCI Controller (rev. 0x02)
uhci3: interrupting at ioapic0 pin 23 (irq 7)
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 1: Intel 82801I USB UHCI Controller (rev. 0x02)
uhci4: interrupting at ioapic0 pin 19 (irq 14)
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 2: Intel 82801I USB UHCI Controller (rev. 0x02)
uhci5: interrupting at ioapic0 pin 18 (irq 5)
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: Intel 82801I USB EHCI Controller (rev. 0x02)
ehci1: interrupting at ioapic0 pin 23 (irq 7)
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
ppb4 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0x92)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled
ex0 at pci5 dev 2 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt (rev. 
0x78)
ex0: interrupting at ioapic0 pin 18 (irq 5)
ex0: MAC address 00:04:75:e5:71:c5
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ex0: WARNING: powerhook_establish is deprecated
Lucent Technologies FW322/323 IEEE 1394 Host Controller (Firewire serial bus, 
interface 0x10, revision 0x70) at pci5 dev 3 function 0 not configured
re0 at pci5 dev 4 function 0: RealTek 8169SC/8110SC Single-chip Gigabit 
Ethernet (rev. 0x10)
re0: interrupting at ioapic0 pin 16 (irq 11)
re0: Ethernet address 00:1b:fc:22:d6:f9
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: Intel 82801IR LPC Interface Bridge (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
ahcisata1 at pci0 dev 31 function 2: Intel 82801I AHCI SATA Controller with 6 
ports
ahcisata1: interrupting at ioapic0 pin 22 (irq 15)
ahcisata1: AHCI revision 1.2, 6 ports, 32 command slots, features 0xef22e0e0
atabus3 at ahcisata1 channel 0
atabus4 at ahcisata1 channel 1
atabus5 at ahcisata1 channel 2
atabus6 at ahcisata1 channel 3
atabus7 at ahcisata1 channel 4
atabus8 at ahcisata1 channel 5
ichsmb0 at pci0 dev 31 function 3: Intel 82801I SMBus Controller (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 18 (irq 5)
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
timecounter: Timecounter "TSC" frequency 3005741880 Hz quality 800
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[0]: Analog Devices AD1988B (rev. 3.0)
azalia0: codec[0]: High Definition Audio rev. 1.0
audio0 at azalia0: full duplex, independent
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4 at usb4
uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5
uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6
uhub6: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb7
uhub7: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub7: 6 ports with 6 removable, self powered
ehci1: handing over low speed device on port 2 to uhci3
uhub7: port 2, device disappeared after reset
ugen0 at uhub3 port 3
ugen0: Realtek RTL8187_Wireless, rev 2.00/1.00, addr 2
ugen1 at uhub4 port 2
ugen1: American Power Conversion Back-UPS RS 1500 FW:8.g9a.I USB FW:g9a, rev 
1.10/1.06, addr 2
wd0 at atabus2 drive 0: <ST380021A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(jmide0:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
dump_misc_init: max_paddr = 0x7ff80000
mountroot: trying lfs...
mountroot: trying ffs...
root file system type: ffs
init: copying out path `/sbin/init' 11
mskc0: interrupt moderation is 1000 us
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
Accounting started