Re: Intel Penryn Core 2 T8100 proc. and PM 965 Express chipset current support ?

["John R. Shannon" <john%johnrshannon.com@localhost>]

I have that combination in a Panasonic CF-Y7. It works, but with some 
limitations. I've attached dmesg output.

My problems have related to the 965GM graphics. At present. I can only 
use 1GB of memory; with 2GB, only garbage is displayed on the screen.


Vincent wrote:
> Hi there,
>
> I am planning to update my old laptop and buy a brand new Sony Vaio FZ 
> 31 S. That beast features the new Core duo 45 nm Penryn-based processor 
> (with SSE4, etc.) and a PM 965 Express chipset (and more, but that's not 
> relevant here).
>
> Since I am planning to wipe off Windows, try to get refunded and install 
> NetBSD-current instead, I am wondering if this is feasible, that is, if 
> there is no incompatibility recorded (i.e. does the system boot, even in 
> a somewhat backup mode?). Besides, tell what features are or are not yet 
> implemented, so that if I can be of any help testing out or writing out 
> fresh things on this newest plateform, it would be with great pleasure.
>
> Vincent


--
John R. Shannon

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.52 (KERNEL.LAPTOP) #1: Wed Feb  6 07:51:36 MST 2008
        
root%laptop.internal.johnrshannon.com@localhost:/usr/obj/import/CURRENT/NetBSD/src/sys/arch/i386/compile/KERNEL.LAPTOP
total memory = 1014 MB
avail memory = 985 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Matsushita Electric Industrial Co.,Ltd. CF-Y7BWAZZAM (002)
mainbus0 (root)
cpu0 at mainbus0 apid 0: (boot processor)
cpu0: Intel Core 2 (Merom) (686-class), 1596.17 MHz, id 0x6fb
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 e3bd<SSE3,MONITOR,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
cpu0: features3 20100000<XD,EM64T>
cpu0: "Intel(R) Core(TM)2 Duo CPU     L7500  @ 1.60GHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu0: L2 cache 4 MB 64B/line 16-way
cpu0: ITLB 128 4 KB entries 4-way
cpu0: using thermal monitor 1
cpu0: Initial APIC ID 0
cpu0: Cluster/Package ID 0
cpu0: Core ID 0
cpu0: Enhanced SpeedStep (1244 mV) 1800 MHz
cpu0: Enhanced SpeedStep frequencies available (MHz): 1800 1600 1400 1200
cpu0: calibrating local timer
cpu0: apic clock running at 199 MHz
cpu0: 64 page colors
cpu1 at mainbus0 apid 1: (application processor)
cpu1: Intel Core 2 (Merom) (686-class), 1596.19 MHz, id 0x6fb
cpu1: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu1: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu1: features2 e3bd<SSE3,MONITOR,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
cpu1: features3 20100000<XD,EM64T>
cpu1: "Intel(R) Core(TM)2 Duo CPU     L7500  @ 1.60GHz"
cpu1: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu1: L2 cache 4 MB 64B/line 16-way
cpu1: ITLB 128 4 KB entries 4-way
cpu1: using thermal monitor 1
cpu1: Initial APIC ID 1
cpu1: Cluster/Package ID 0
cpu1: Core ID 1
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20070320
acpi0: X/RSDT: OemId <MATBIO,CFY7W-2 ,06040000>, AslId <MEI ,00000000>
mpacpi: could not get bus number, assuming bus 0
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
CPU0 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU1 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D-0): ACPI Lid Switch
acpibat0 at acpi0 (BATA, PNP0C0A-0): ACPI Battery (Control Method)
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
acpibut0 at acpi0 (PWRB, PNP0C0C-0): ACPI Power Button
HKEY (MAT0019) at acpi0 not configured
MISC (MAT0021) at acpi0 not configured
PCI0 (PNP0A08) [PCI Express/PCI-X Mode-2 Host Bridge] at acpi0 not configured
TMEM (INT3402) at acpi0 not configured
OPRM (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not 
configured
MBRD (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not 
configured
DMAC (PNP0200) [AT DMA Controller] at acpi0 not configured
hpet0 at acpi0 (HPET, PNP0103)
hpet0: mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
IPIC (PNP0000) [AT Interrupt Controller] at acpi0 not configured
npx1 at acpi0 (MATH, PNP0C04)
npx1: io 0xf0 irq 13
npx1: reported by CPUID; using exception 16
MBD0 (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not 
configured
RTC (PNP0B00) [AT Real-Time Clock] at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): AT Timer
attimer1: io 0x40-0x43,0x50-0x53 irq 0
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
TPM (IFX0102) at acpi0 not configured
acpiec0 at acpi0 (EC0, PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
TFN1 (INT3404) at acpi0 not configured
TSK2 (INT3403) at acpi0 not configured
T_VR (INT3403) at acpi0 not configured
pckbc1 at acpi0 (K101, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU3, SYN0502): aux port
pckbc2: irq 12
LNKA (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKB (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKC (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKD (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKF (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKG (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKH (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
TCPU (INT3401) at acpi0 not configured
IETM (INT3400) at acpi0 not configured
PTID (INT340E) at acpi0 not configured
acpitz0 at acpi0 (TZ00): critical 113.0C, passive cooling
acpitz1 at acpi0 (TZ01): critical 130.0C passive 62.0C, passive cooling
apm0 at acpi0: Power Management spec V1.2
pcppi1: attached to attimer1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 6.2
pms0: Palm detect, Multi-finger
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82965PM Host Bridge (rev. 0x03)
agp0 at pchb0: detected 7676k stolen memory
agp0: aperture at 0xe0000000, size 0x20000000
vga1 at pci0 dev 2 function 0: Intel 82965PM Integrated Graphics Device (rev. 
0x03)
vga1: WARNING: ignoring 64-bit BAR @ 0x10
vga1: WARNING: ignoring 64-bit BAR @ 0x18
wsdisplay0 at vga1 kbdmux 1: console (80x50, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
direct rendering for vga1 unsupported
Intel 82965PM Integrated Graphics Device (miscellaneous display, revision 0x03) 
at pci0 dev 2 function 1 not configured
Intel product 0x2a08 (miscellaneous DASP, revision 0x03) at pci0 dev 4 function 
0 not configured
uhci0 at pci0 dev 26 function 0: Intel 82801H USB UHCI Controller (rev. 0x03)
uhci0: interrupting at ioapic0 pin 16 (irq 7)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 26 function 1: Intel 82801H USB UHCI Controller (rev. 0x03)
uhci1: interrupting at ioapic0 pin 21 (irq 5)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 26 function 7: Intel 82801H USB EHCI Controller (rev. 0x03)
ehci0: interrupting at ioapic0 pin 18 (irq 11)
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 22 (irq 10)
azalia0: host: Intel 82801H High Definition Audio Controller (rev. 3)
azalia0: host: High Definition Audio rev. 1.0
ppb0 at pci0 dev 28 function 0: Intel 82801H PCI Express Port #1 (rev. 0x03)
ppb0: disabling notification events
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 3: Intel 82801H PCI Express Port #4 (rev. 0x03)
ppb1: disabling notification events
pci2 at ppb1 bus 4
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 4: Intel 82801H PCI Express Port #5 (rev. 0x03)
ppb2: disabling notification events
pci3 at ppb2 bus 5
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
mskc0 at pci3 dev 0 function 0mskc0: interrupt moderation is 0 us
, Yukon-2 EC Ultra rev. B0 (0x3): ioapic0 pin 16 (irq 7)
msk0 at mskc0 port A: Ethernet address 00:0b:97:dc:f7:17
ukphy0 at msk0 phy 0: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000ac2, model 0x000b, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
uhci2 at pci0 dev 29 function 0: Intel 82801H USB UHCI Controller (rev. 0x03)
uhci2: interrupting at ioapic0 pin 23 (irq 11)
usb3 at uhci2: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 1: Intel 82801H USB UHCI Controller (rev. 0x03)
uhci3: interrupting at ioapic0 pin 19 (irq 11)
usb4 at uhci3: USB revision 1.0
uhub4 at usb4
uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhci4 at pci0 dev 29 function 2: Intel 82801H USB UHCI Controller (rev. 0x03)
uhci4: interrupting at ioapic0 pin 18 (irq 11)
usb5 at uhci4: USB revision 1.0
uhub5 at usb5
uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
ehci1 at pci0 dev 29 function 7: Intel 82801H USB EHCI Controller (rev. 0x03)
ehci1: interrupting at ioapic0 pin 23 (irq 11)
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci2 uhci3 uhci4
usb6 at ehci1: USB revision 2.0
uhub6 at usb6
uhub6: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 6 ports with 6 removable, self powered
ppb3 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xf3)
pci4 at ppb3 bus 6
pci4: i/o space, memory space enabled
cbb0 at pci4 dev 0 function 0: Ricoh 5C476 PCI-CardBus bridge (rev. 0xba)
cbb0: cacheline 0x0 lattimer 0x40
cbb0: bhlc 0x824000
cbb0: interrupting at ioapic0 pin 22 (irq 10)
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 7
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801HBM LPC Interface Bridge (rev. 0x03)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801HBM IDE Controller (ICH8M) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at piixide0 channel 1
ahcisata0 at pci0 dev 31 function 2: Intel 82801HBM SATA Controller
ahcisata0: interrupting at ioapic0 pin 19 (irq 11)
ahcisata0: AHCI revision 1.1, 3 ports, 32 command slots, features 0xe720e080
atabus2 at ahcisata0 channel 0
atabus3 at ahcisata0 channel 1
atabus4 at ahcisata0 channel 2
ichsmb0 at pci0 dev 31 function 3: Intel 82801H SMBus Controller (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 19 (irq 11)
iic0 at ichsmb0: I2C bus
isa0 at pcib0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[0]: 0x11d4/0x1884 (rev. 1.0)
azalia0: codec[0]: High Definition Audio rev. 1.0
audio0 at azalia0: full duplex, independent
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
IPsec: Initialized Security Association Processing.
acpibat0: battery info: Panasonic, LION, CF-VZSU45 00996
ahcisata0 port 0: device present, speed: 1.5Gb/s
wd0 at atabus2 drive 0: <TOSHIBA MK8037GSX>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) 
(using DMA)
ahcisata0 port 1: PHY offline
ahcisata0 port 2: PHY offline
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
uhidev0 at uhub3 port 2 configuration 1 interface 0
uhidev0: KYE Genius USB Wheel Mouse, rev 1.00/0.00, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
mskc0: interrupt moderation is 1000 us