Re: Backporting?

[Mouse <mouse%Rodents-Montreal.ORG@localhost>]

>> How difficult is it to backport xsrc?
> Would help if you said what kind of graphics card you want to use.

Fair point.  I was thinking of taking all - or almost - of xsrc, on the
assumption that I'd get all the hardware support that's there, but if
it's possible to pull in just the support for a particular piece, that
might be easier.

8.0 reports it as

acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output Device
acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0303): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0304): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0305): ACPI Display Output Device
acpiout8 at acpivga0 (DD09, 0x0009): ACPI Display Output Device
acpiout9 at acpivga0 (DD0A, 0x000a): ACPI Display Output Device
acpiout10 at acpivga0 (DD0B, 0x000b): ACPI Display Output Device
acpiout11 at acpivga0 (DD0C, 0x000c): ACPI Display Output Device
acpiout12 at acpivga0 (DD0D, 0x000d): ACPI Display Output Device
acpiout13 at acpivga0 (DD0E, 0x000e): ACPI Display Output Device
acpiout14 at acpivga0 (DD0F, 0x000f): ACPI Display Output Device
acpiout15 at acpivga0 (DD1F, 0x0400): ACPI Display Output Device
acpiout15: brightness levels: [0-100]
acpiout16 at acpivga0 (SKC0, 0xca00): ACPI Display Output Device
acpivga0: unknown output device acpiout0
acpivga0: unknown output device acpiout1
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: unknown output device acpiout8
acpivga0: unknown output device acpiout9
acpivga0: unknown output device acpiout10
acpivga0: unknown output device acpiout11
acpivga0: unknown output device acpiout12
acpivga0: unknown output device acpiout13
acpivga0: unknown output device acpiout14
acpivga0: unknown output device acpiout16
acpivga0: connected output devices:
acpivga0:   0x0400 (acpiout15): Unknown Output Device, head 0
[...]
vga0 at pci0 dev 2 function 0: vendor 8086 product 5912 (rev. 0x04)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured

(full dmesg below).  The box has three physical video connectors, two
HDMI and one DE-15 ("VGA").

>> So, if anyone has any thoughts on it, how hard would it be to take
>> 8.0 and replace the X server with something newer (either from 9.x,
>> current, or even straight from X.org)?
> There is also a thing called pkgsrc.

True.  I don't use it myself, so I tend to forget it exists.  That's
likely a third option, then; the reasons I don't use it probably won't
apply here, same as the reasons I don't run 8.0 don't.

/~\ The ASCII				  Mouse
\ / Ribbon Campaign
 X  Against HTML		mouse%rodents-montreal.org@localhost
/ \ Email!	     7D C8 61 52 5D E7 2D 39  4E F1 31 3E E8 B3 27 4B

Full dmesg.  I've replaced the kernel config name with XYZ; it's just
/sys/arch/amd64/conf/GENERIC with the first 23 (comment) lines removed.

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 8.0 (XYZ) #1: Wed May  1 17:05:41 EDT 2019
	mouse%Aaeon.Rodents-Montreal.ORG@localhost:/home/mouse/kbuild/XYZ
total memory = 4004 MB
avail memory = 3864 MB
cpu_rng: RDSEED
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
AAEON BOXER-6839 (V1.0)
mainbus0 (root)
ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
ACPI: XSDT 0x000000008C8660B0 0000DC (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x000000008C88C860 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x000000008C866218 026641 (v02 ALASKA A M I    01072009 INTL 20160422)
ACPI: FACS 0x000000008D034C40 000040
ACPI: APIC 0x000000008C88C978 000084 (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x000000008C88CA00 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x000000008C88CA48 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
ACPI: SSDT 0x000000008C88CA88 0003BC (v01 SataRe SataTabl 00001000 INTL 20160422)
ACPI: FIDT 0x000000008C88CE48 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: SSDT 0x000000008C88CEE8 003159 (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
ACPI: SSDT 0x000000008C890048 002599 (v02 PegSsd PegSsdt  00001000 INTL 20160422)
ACPI: HPET 0x000000008C8925E8 000038 (v01 INTEL  KBL      00000001 MSFT 0000005F)
ACPI: SSDT 0x000000008C892620 000E03 (v02 INTEL  Ther_Rvp 00001000 INTL 20160422)
ACPI: SSDT 0x000000008C893428 000999 (v02 INTEL  xh_rvp08 00000000 INTL 20160422)
ACPI: UEFI 0x000000008C893DC8 000042 (v01 INTEL  EDK2     00000002      01000013)
ACPI: SSDT 0x000000008C893E10 000EDE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
ACPI: LPIT 0x000000008C894CF0 000094 (v01 INTEL  KBL      00000000 MSFT 0000005F)
ACPI: WSMT 0x000000008C894D88 000028 (v01 INTEL  KBL      00000000 MSFT 0000005F)
ACPI: SSDT 0x000000008C894DB0 000141 (v02 INTEL  HdaDsp   00000000 INTL 20160422)
ACPI: SSDT 0x000000008C894EF8 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x000000008C895198 003002 (v02 INTEL  PtidDevc 00001000 INTL 20160422)
ACPI: SSDT 0x000000008C8981A0 000215 (v02 INTEL  TbtTypeC 00000000 INTL 20160422)
ACPI: DBGP 0x000000008C8983B8 000034 (v01 INTEL           00000002 MSFT 0000005F)
ACPI: DBG2 0x000000008C8983F0 000054 (v00 INTEL           00000002 MSFT 0000005F)
ACPI: DMAR 0x000000008C898448 0000A8 (v01 INTEL  KBL      00000001 INTL 00000001)
ACPI: ASF! 0x000000008C8984F0 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
ACPI: Executed 23 blocks of module-level executable AML code
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Executed 4 blocks of module-level executable AML code
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: 11 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 120 pins
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Core(TM) i3-7101TE CPU @ 3.40GHz, id 0x906e9
cpu0: package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Core(TM) i3-7101TE CPU @ 3.40GHz, id 0x906e9
cpu1: package 0, core 1, smt 0
cpu2 at mainbus0 apid 1
cpu2: Intel(R) Core(TM) i3-7101TE CPU @ 3.40GHz, id 0x906e9
cpu2: package 0, core 0, smt 1
cpu3 at mainbus0 apid 3
cpu3: Intel(R) Core(TM) i3-7101TE CPU @ 3.40GHz, id 0x906e9
cpu3: package 0, core 1, smt 1
acpi0 at mainbus0: Intel ACPICA 20170303
acpi0: X/RSDT: OemId <ALASKA,  A M I ,01072009>, AslId <AMI ,00010013>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE816CD96808 0006F6 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE816CD96008 00065C (v02 PmRef  ApIst    00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 24000000 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1)acpiec0: unable to evaluate _GPE: AE_NOT_FOUND
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output Device
acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0303): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0304): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0305): ACPI Display Output Device
acpiout8 at acpivga0 (DD09, 0x0009): ACPI Display Output Device
acpiout9 at acpivga0 (DD0A, 0x000a): ACPI Display Output Device
acpiout10 at acpivga0 (DD0B, 0x000b): ACPI Display Output Device
acpiout11 at acpivga0 (DD0C, 0x000c): ACPI Display Output Device
acpiout12 at acpivga0 (DD0D, 0x000d): ACPI Display Output Device
acpiout13 at acpivga0 (DD0E, 0x000e): ACPI Display Output Device
acpiout14 at acpivga0 (DD0F, 0x000f): ACPI Display Output Device
acpiout15 at acpivga0 (DD1F, 0x0400): ACPI Display Output Device
acpiout15: brightness levels: [0-100]
acpiout16 at acpivga0 (SKC0, 0xca00): ACPI Display Output Device
acpivga0: unknown output device acpiout0
acpivga0: unknown output device acpiout1
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: unknown output device acpiout8
acpivga0: unknown output device acpiout9
acpivga0: unknown output device acpiout10
acpivga0: unknown output device acpiout11
acpivga0: unknown output device acpiout12
acpivga0: unknown output device acpiout13
acpivga0: unknown output device acpiout14
acpivga0: unknown output device acpiout16
acpivga0: connected output devices:
acpivga0:   0x0400 (acpiout15): Unknown Output Device, head 0
SIO2 (PNP0C02) at acpi0 not configured
SIO1 (PNP0C02) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
UAR3 (PNP0501) at acpi0 not configured
UAR4 (PNP0501) at acpi0 not configured
UAR5 (PNP0501) at acpi0 not configured
UAR6 (PNP0501) at acpi0 not configured
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
LDR2 (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CWDT (INT3F0D) at acpi0 not configured
PDRC (PNP0C02) at acpi0 not configured
IOTR (PNP0C02) at acpi0 not configured
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
PEPD (INT33A1) at acpi0 not configured
acpibut1 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
PTID (INT340E) at acpi0 not configured
acpitz0 at acpi0 (TZ00)
acpitz0: active cooling level 0: 71.0C
acpitz0: active cooling level 1: 55.0C
acpitz0: active cooling level 2: 50.0C
acpitz0: active cooling level 3: 45.0C
acpitz0: active cooling level 4: 40.0C
acpitz0: levels: critical 119.0 C
acpitz1 at acpi0 (TZ01)
acpitz1: levels: critical 119.0 C, passive cooling
ACPI: Enabled 4 GPEs in block 00 to 7F
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 590f (rev. 0x05)
vga0 at pci0 dev 2 function 0: vendor 8086 product 5912 (rev. 0x04)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
xhci0 at pci0 dev 20 function 0: vendor 8086 product a12f (rev. 0x31)
xhci0: interrupting at msi0 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
vendor 8086 product a131 (miscellaneous DASP, revision 0x31) at pci0 dev 20 function 2 not configured
vendor 8086 product a13a (miscellaneous communications, revision 0x31) at pci0 dev 22 function 0 not configured
ahcisata0 at pci0 dev 23 function 0: vendor 8086 product a102 (rev. 0x31)
ahcisata0: interrupting at ioapic0 pin 16
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.31, 4 ports, 32 slots, CAP 0xe734ff43<EMS,PSC,SSC,PMD,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
ppb0 at pci0 dev 28 function 0: vendor 8086 product a110 (rev. 0xf1)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 3: vendor 8086 product a113 (rev. 0xf1)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci2 dev 0 function 0: I210-T1 Ethernet Server Adapter (rev. 0x03)
wm0: for TX and RX interrupting at msix1 vec 0 affinity to 0
wm0: for TX and RX interrupting at msix1 vec 1 affinity to 1
wm0: for TX and RX interrupting at msix1 vec 2 affinity to 2
wm0: for TX and RX interrupting at msix1 vec 3 affinity to 3
wm0: for LINK interrupting at msix1 vec 4
wm0: PCI-Express bus
wm0: 64 words iNVM, version 0.6
wm0: Ethernet address 00:07:32:4a:70:ca
wm0: Copper
wm0: 0xc214420<INVM,IOH_VALID,PCIE,NEWQUEUE,WOL,PLLWA>
ukphy0 at wm0 phy 1: OUI 0x000ac2, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb2 at pci0 dev 28 function 4: vendor 8086 product a114 (rev. 0xf1)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 8.0GT/s
ppb2: link is x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
puc0 at pci3 dev 0 function 0: Oxford Semiconductor OXPCIe952 LPT (lpt)
lpt2 at puc0 port 0: ioaddr 0xd010, interrupting at ioapic0 pin 16
ppb3 at pci0 dev 29 function 0: vendor 8086 product a118 (rev. 0xf1)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 29 function 3: vendor 8086 product a11b (rev. 0xf1)
ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s
ppb4: link is x1 @ 2.5GT/s
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
wm1 at pci5 dev 0 function 0: I210-T1 Ethernet Server Adapter (rev. 0x03)
wm1: for TX and RX interrupting at msix2 vec 0 affinity to 0
wm1: for TX and RX interrupting at msix2 vec 1 affinity to 1
wm1: for TX and RX interrupting at msix2 vec 2 affinity to 2
wm1: for TX and RX interrupting at msix2 vec 3 affinity to 3
wm1: for LINK interrupting at msix2 vec 4
wm1: PCI-Express bus
wm1: 64 words iNVM, version 0.6
wm1: Ethernet address 00:07:32:4a:70:cb
wm1: Copper
wm1: 0xc214420<INVM,IOH_VALID,PCIE,NEWQUEUE,WOL,PLLWA>
ukphy1 at wm1 phy 1: OUI 0x000ac2, model 0x0000, rev. 0
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb5 at pci0 dev 29 function 4: vendor 8086 product a11c (rev. 0xf1)
ppb5: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 8.0GT/s
ppb5: link is x1 @ 2.5GT/s
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
wm2 at pci6 dev 0 function 0: I210-T1 Ethernet Server Adapter (rev. 0x03)
wm2: for TX and RX interrupting at msix3 vec 0 affinity to 0
wm2: for TX and RX interrupting at msix3 vec 1 affinity to 1
wm2: for TX and RX interrupting at msix3 vec 2 affinity to 2
wm2: for TX and RX interrupting at msix3 vec 3 affinity to 3
wm2: for LINK interrupting at msix3 vec 4
wm2: PCI-Express bus
wm2: 64 words iNVM, version 0.6
wm2: Ethernet address 00:07:32:4a:70:cc
wm2: Copper
wm2: 0xc214420<INVM,IOH_VALID,PCIE,NEWQUEUE,WOL,PLLWA>
ukphy2 at wm2 phy 1: OUI 0x000ac2, model 0x0000, rev. 0
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
pcib0 at pci0 dev 31 function 0: vendor 8086 product a146 (rev. 0x31)
vendor 8086 product a121 (miscellaneous memory, revision 0x31) at pci0 dev 31 function 2 not configured
hdaudio0 at pci0 dev 31 function 3: HD Audio Controller
hdaudio0: interrupting at msi4 vec 0
hdafg0 at hdaudio0: vendor 10ec product 0269
hdafg0: DAC00 2ch: HP Out [Jack]
hdafg0: DAC01 2ch: Speaker [Built-In]
hdafg0: ADC02 2ch: Mic In [Jack]
hdafg0: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
hdafg0: Latency: 128 milliseconds
spkr0 at audio0: PC Speaker (synthesized)
hdafg1 at hdaudio0: vendor 8086 product 280b
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
ichsmb0 at pci0 dev 31 function 4: vendor 8086 product a123 (rev. 0x31)
ichsmb0: interrupting at ioapic0 pin 16
iic0 at ichsmb0: I2C bus
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pcppi0 at isa0 port 0x61
spkr1 at pcppi0: PC Speaker
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: P0: FFH, lat  10 us, pow 35000 mW, 3400 MHz
acpicpu0: P1: FFH, lat  10 us, pow 32154 mW, 3200 MHz
acpicpu0: P2: FFH, lat  10 us, pow 30770 mW, 3100 MHz
acpicpu0: P3: FFH, lat  10 us, pow 28078 mW, 2900 MHz
acpicpu0: P4: FFH, lat  10 us, pow 25492 mW, 2700 MHz
acpicpu0: P5: FFH, lat  10 us, pow 23000 mW, 2500 MHz
acpicpu0: P6: FFH, lat  10 us, pow 21791 mW, 2400 MHz
acpicpu0: P7: FFH, lat  10 us, pow 19448 mW, 2200 MHz
acpicpu0: P8: FFH, lat  10 us, pow 17196 mW, 2000 MHz
acpicpu0: P9: FFH, lat  10 us, pow 15038 mW, 1800 MHz
acpicpu0: P10: FFH, lat  10 us, pow 14282 mW, 1700 MHz
acpicpu0: P11: FFH, lat  10 us, pow 12253 mW, 1500 MHz
acpicpu0: P12: FFH, lat  10 us, pow 10313 mW, 1300 MHz
acpicpu0: P13: FFH, lat  10 us, pow  8463 mW, 1100 MHz
acpicpu0: P14: FFH, lat  10 us, pow  7569 mW, 1000 MHz
acpicpu0: P15: FFH, lat  10 us, pow  5846 mW,  800 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=88
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=88
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 3408680660 Hz quality 3000
uhub0 at usb0: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 1.00/1.00, addr 0
uhub0: 10 ports with 10 removable, self powered
uhub1 at usb1: vendor 8086 (0x8086) xHCI Root Hub (0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 16 ports with 16 removable, self powered
IPsec: Initialized Security Association Processing.
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: PHY offline
ahcisata0 port 2: PHY offline
ahcisata0 port 3: PHY offline
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Gaming KB (0x258a) Gaming KB (0x1006), rev 1.10/1.05, addr 1, iclass 3/1
ukbd0 at uhidev0
wd0 at atabus0 drive 0
wd0: <WDC WD1600BEVT-00A23T0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1
uhidev1: Gaming KB (0x258a) Gaming KB (0x1006), rev 1.10/1.05, addr 1, iclass 3/1
uhidev1: 8 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=2, output=0, feature=0
uhid2 at uhidev1 reportid 5: input=0, output=0, feature=5
ukbd1 at uhidev1 reportid 6
ukbd1: attach failed, key code size != 8
ukbd2 at uhidev1 reportid 7
wskbd1 at ukbd2 mux 1
wskbd1: connecting to wsdisplay0
ukbd3 at uhidev1 reportid 8
wskbd2 at ukbd3 mux 1
wskbd2: connecting to wsdisplay0
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture, mmap
pad0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 44100
pad0: Latency: 139 milliseconds
spkr2 at audio1: PC Speaker (synthesized)
WARNING: 21 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/8.0/modules
WARNING: clock gained 4 days
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)