tech-kern archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Interrupt problem on Sony Vaio BZ11XN



Hello,

I have just installed NetBSD 5.0.1 on a Vaio Sony BZ11XN laptop and I'm seeing 
a huge number of interrupts.
After an uptime of one hour, ioapic0 pin 19 has produced 187203 interrupts 
(systat vmstat).

The machine seems to work properly, I have been compiling some stuff, but when 
checked with the top command, the first CPU has interrupts ranging from 60 % to 
90 % while CPU2 seems OK and handling most of the compiling work.

When machine is idle, I see about 180 000 interrupts in systat vmstat
First CPU has a constant 50 % interrupt time, while CPU2 is at 99 % idle

I'm running the standard kernel from base installation. The only changes I have 
made is install the /usr/pkgsrc and install screen.

If I check the dmesg the ioapic0 pin 19 is the uhci3. There are several USB but 
only this one seems to be generating so much interrupts it loads to 60 % the 
first CPU.

What should I do ? Report this as a problem of just turn off that ioapic pin 19 
if possible at boot using the kernel configuration tool ?

Here is the dmesg :

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.

NetBSD 5.0.1 (GENERIC) #0: Thu Jul 30 01:39:11 UTC 2009
builds%b8.netbsd.org@localhost:/home/builds/ab/netbsd-5-0-1-RELEASE/i386/200907292356Z-obj/home/builds/ab/netbsd-5-0-1-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 3001 MB
avail memory = 2938 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Sony Corporation VGN-BZ11XN (C102LWE3)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 2261MHz, id 0x10676
cpu1 at mainbus0 apid 1: Intel 686-class, 2261MHz, id 0x10676
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId < Sony, VAIO,20081120>, AslId < ,01000013>
ACPI Error (evregion-0427): No handler for Region [ERAM] (0xc41e6300) 
[EmbeddedControl] [20080321]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20080321]
ACPI Error (psparse-0627): Method parse/execution failed [\_SB_.PCI0.DOCK._STA] 
(Node 0xc41f4fc0), AE_NOT_EXIST
ACPI Error (uteval-0306): Method execution failed [\_SB_.PCI0.DOCK._STA] (Node 
0xc41f4fc0), AE_NOT_EXIST
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
ACPI Error (evregion-0427): No handler for Region [ERAM] (0xc41e6300) 
[EmbeddedControl] [20080321]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20080321]
ACPI Error (psparse-0627): Method parse/execution failed [\_SB_.PCI0.DOCK._STA] 
(Node 0xc41f4fc0), AE_NOT_EXIST
ACPI Error (uteval-0306): Method execution failed [\_SB_.PCI0.DOCK._STA] (Node 
0xc41f4fc0), AE_NOT_EXIST
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery (Control Method)
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
hpet0 at acpi0 (HPET, PNP0103)
hpet0: mem 0xfed00000-0xfed003ff irq 0,8
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
npx1 at acpi0 (FPU, PNP0C04)
npx1: io 0xf0 irq 13
npx1: reported by CPUID; using exception 16
attimer1 at acpi0 (TIMR, PNP0100): AT Timer
attimer1: io 0x40-0x43,0x50-0x53
pckbc1 at acpi0 (KBC, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOUE, SNY9008): aux port
pckbc2: irq 12
acpiec0 at acpi0 (H8EC, PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
sony0 at acpi0 (SNC, SNY5001): Sony Miscellaneous Controller
ACPI Error (nsxfeval-0197): No return value [20080321]
ACPI Error (nsxfeval-0197): No return value [20080321]
ACPI Error (nsxfeval-0197): No return value [20080321]
ACPI Error (nsxfeval-0197): No return value [20080321]
TPM (IFX0102) ACPI Error (nsxfeval-0213): Incorrect return type [Buffer] 
requested [String] [20080321]
at acpi0 not configured
DOCK (PNP0C15) at acpi0 not configured
acpitz0 at acpi0 (THRM): critical 95.0C passive 59.0C, passive cooling
apm0 at acpi0: Power Management spec V1.2
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 7.0
pms0: Up/down buttons, Palm detect
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x2a40 (rev. 0x07)
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x2a42 (rev. 0x07)
vga1: WARNING: ignoring 64-bit BAR @ 0x10
vga1: WARNING: ignoring 64-bit BAR @ 0x18
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
vendor 0x8086 product 0x2a43 (miscellaneous display, revision 0x07) at pci0 dev 
2 function 1 not configured
wm0 at pci0 dev 25 function 0: 82801I mobile (AMT) LAN Controller, rev. 3
wm0: interrupting at ioapic0 pin 20
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address 00:1a:80:e1:4f:91
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2937 (rev. 0x03)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2938 (rev. 0x03)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x293c (rev. 0x03)
ehci0: interrupting at ioapic0 pin 19
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 22
azalia0: host: 0x8086/0x293e (rev. 3), HDA rev. 1.0
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x2940 (rev. 0x03)
ppb0: disabling notification events
pci1 at ppb0 bus 6
pci1: no spaces enabled!
ppb1 at pci0 dev 28 function 2: vendor 0x8086 product 0x2944 (rev. 0x03)
ppb1: disabling notification events
pci2 at ppb1 bus 4
pci2: i/o space, memory space enabled
vendor 0x8086 product 0x4232 (miscellaneous network) at pci2 dev 0 function 0 
not configured
ppb2 at pci0 dev 28 function 3: vendor 0x8086 product 0x2946 (rev. 0x03)
ppb2: disabling notification events
pci3 at ppb2 bus 10
pci3: no spaces enabled!
uhci2 at pci0 dev 29 function 0: vendor 0x8086 product 0x2934 (rev. 0x03)
uhci2: interrupting at ioapic0 pin 23
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 1: vendor 0x8086 product 0x2935 (rev. 0x03)
uhci3: interrupting at ioapic0 pin 19
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 2: vendor 0x8086 product 0x2936 (rev. 0x03)
uhci4: interrupting at ioapic0 pin 16
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 3: vendor 0x8086 product 0x2939 (rev. 0x03)
uhci5: interrupting at ioapic0 pin 18
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x293a (rev. 0x03)
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci2 uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0x93)
pci4 at ppb3 bus 1
pci4: i/o space, memory space enabled
cbb0 at pci4 dev 7 function 0: vendor 0x1180 product 0x0476 (rev. 0xba)
fwohci0 at pci4 dev 7 function 1: vendor 0x1180 product 0x0832 (rev. 0x04)
fwohci0: interrupting at ioapic0 pin 21
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 08:00:46:03:04:ce:e6:25
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
vendor 0x1180 product 0x0822 (SD Host Controller system, revision 0x21) at pci4 
dev 7 function 2 not configured
vendor 0x1180 product 0x0592 (miscellaneous system, revision 0x11) at pci4 dev 
7 function 4 not configured
cbb0: cacheline 0x0 lattimer 0x10
cbb0: bhlc 0x821000
cbb0: interrupting at ioapic0 pin 20
cardslot0 at cbb0
cardbus0 at cardslot0: bus 2
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0
pcib0: vendor 0x8086 product 0x2917 (rev. 0x03)
pciide0 at pci0 dev 31 function 2
pciide0: vendor 0x8086 product 0x2928 (rev. 0x03)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel configured to native-PCI mode
pciide0: using ioapic0 pin 19 for native-PCI interrupt
atabus0 at pciide0 channel 0
pciide0: secondary channel configured to native-PCI mode
atabus1 at pciide0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x2930 (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
pciide1 at pci0 dev 31 function 5
pciide1: vendor 0x8086 product 0x292d (rev. 0x03)
pciide1: bus-master DMA support present, but unused (no driver support)
pciide1: primary channel wired to native-PCI mode
pciide1: using ioapic0 pin 19 for native-PCI interrupt
atabus2 at pciide1 channel 0
pciide1: secondary channel wired to native-PCI mode
atabus3 at pciide1 channel 1
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
attimer1: attached to pcppi0
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
azalia0: codec[0]: Realtek ALC262 (rev. 3.2), HDA rev. 1.0
azalia0: codec[1]: 0x14f1/0x2c06 (rev. 0.0), HDA rev. 1.0
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1] has no audio function groups
audio0 at azalia0: full duplex, independent
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb7: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub7: 8 ports with 8 removable, self powered
acpibat0: battery info: Sony Corp. , LION, VGP-BPS13A 4296
uvideo0 at uhub2 port 2 configuration 1 interface 0: Ricoh co. Ltd. product 
0x183f, rev 2.00/40.04, addr 2
video0 at uvideo0: Ricoh co. Ltd. product 0x183f, rev 2.00/40.04, addr 2
ugen0 at uhub0 port 1
ugen0: TouchStrip Fingerprint Sensor, rev 1.00/0.33, addr 2
ubt0 at uhub5 port 1
ubt0: Broadcom Corp BCM2046 Bluetooth Device, rev 2.00/2.18, addr 2
wd0 at atabus0 drive 0: 
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 186 GB, 387621 cyl, 16 head, 63 sec, 512 bytes/sect x 390721968 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0:  cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x50, vt100 emulation)
wsdisplay0: screen 2 added (80x50, vt100 emulation)
wsdisplay0: screen 3 added (80x50, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
ubt0: at uhub5 port 1 (addr 2) disconnected
ubt0: detached
ubt0 at uhub5 port 1
ubt0: Broadcom Corp BCM2046 Bluetooth Device, rev 2.00/2.18, addr 2




Home | Main Index | Thread Index | Old Index