Re: CVS commit: src/sys/dev/usb

[Frank Kardel <kardel%netbsd.org@localhost>]

Just a note.

Today I tried out a -current (44 - 20110123) kernel and infortunately my 
modem (used for fax service) failed to be detected. The port is being 
disabled.
-current as of 200910 (20) is working.

Any ideas or is it time to start the kernel breakage binary hunt ?

Frank

PCI information:
000:00:0: Intel product 0x29e0 (host bridge, revision 0x01)
000:01:0: Intel product 0x29e1 (PCI bridge, revision 0x01)
000:26:0: Intel 82801I USB UHCI Controller (USB serial bus, revision 0x02)
000:26:1: Intel 82801I USB UHCI Controller (USB serial bus, revision 0x02)
000:26:2: Intel 82801I USB UHCI Controller (USB serial bus, revision 0x02)
000:26:7: Intel 82801I USB EHCI Controller (USB serial bus, interface 
0x20, revision 0x02)
000:27:0: Intel 82801I High Definition Audio Controller (multimedia 
subclass 0x03, revision 0x02)
000:28:0: Intel 82801I PCI Express Port #1 (PCI bridge, revision 0x02)
000:28:3: Intel 82801I PCI Express Port #4 (PCI bridge, revision 0x02)
000:28:4: Intel 82801I PCI Express Port #5 (PCI bridge, revision 0x02)
000:28:5: Intel 82801I PCI Express Port #6 (PCI bridge, revision 0x02)
000:29:0: Intel 82801I USB UHCI Controller (USB serial bus, revision 0x02)
000:29:1: Intel 82801I USB UHCI Controller (USB serial bus, revision 0x02)
000:29:2: Intel 82801I USB UHCI Controller (USB serial bus, revision 0x02)
000:29:7: Intel 82801I USB EHCI Controller (USB serial bus, interface 
0x20, revision 0x02)
000:30:0: Intel 82801BA Hub-PCI Bridge (PCI bridge, interface 0x01, 
revision 0x92)
000:31:0: Intel 82801IR LPC Interface Bridge (ISA bridge, revision 0x02)
000:31:2: Intel 82801I AHCI SATA Controller w/ 6 ports (SATA mass 
storage, interface 0x01, revision 0x02)
000:31:3: Intel 82801I SMBus Controller (SMBus serial bus, revision 0x02)

usbdevs -v

Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), 
vendor 0x8086(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), 
vendor 0x8086(0x8086), rev 1.00
port 1 powered
port 2 addr 2: low speed, power 100 mA, config 1, Basic Optical 
Mouse(0x0084), Microsoft(0x045e), rev 0.00
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), 
vendor 0x8086(0x8086), rev 1.00
port 1 addr 2: full speed, power 400 mA, config 2, ELSA Modem 
Board(0x2267), Lucent Technologies, Inc.(0x05cc), rev 1.00
port 2 addr 3: full speed, self powered, config 1, product 
0x1446(0x1446), vendor 0x0451(0x0451), rev 1.10
 port 1 powered
 port 2 powered
 port 3 powered
 port 4 powered
Controller /dev/usb3:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), 
vendor 0x8086(0x8086), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 powered
Controller /dev/usb4:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), 
vendor 0x8086(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb5:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), 
vendor 0x8086(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb6:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), 
vendor 0x8086(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb7:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), 
vendor 0x8086(0x8086), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 powered



Jared D. McNeill wrote:
> Module Name:    src
> Committed By:   jmcneill
> Date:           Tue Jan 18 15:05:03 UTC 2011
>
> Modified Files:
>         src/sys/dev/usb: ehci.c
>
> Log Message:
> fix port reset for non-ETTF case broken by previous commit
>
>
> To generate a diff of this commit:
> cvs rdiff -u -r1.172 -r1.173 src/sys/dev/usb/ehci.c
>
> Please note that diffs are not public domain; they are subject to the
> copyright notices on the relevant files.
>