Re: Will an Oracle T4-1 run NetBSD (yet)?

To: Fredrik Pettai <pettai%sunet.se@localhost>
Subject: Re: Will an Oracle T4-1 run NetBSD (yet)?
From: Palle Lyckegaard <palle%lyckegaard.dk@localhost>
Date: Mon, 4 Jun 2018 19:06:15 +0000 (UTC)

On Mon, 4 Jun 2018, Fredrik Pettai wrote:


I?m a bit confused, AFAICR, "boot cdrom? at the ok-prompt should suffice?
but it doesn?t seem to work:

{0} ok boot cdrom
.

SPARC T4-1, No Keyboard
Copyright (c) 1998, 2013, Oracle and/or its affiliates. All rights reserved.
OpenBoot 4.34.3, 32256 MB memory available?
[?]

results in this message:

Boot device: /pci@400/pci@2/pci@0/pci@4/scsi@0/disk@p6  File and args:
The file just loaded does not appear to be executable.


try 'devalias'

{0} ok devalias
ttya                     /pci@7c0/pci@0/pci@1/pci@0/isa@2/serial@0,3f8
nvram                    /virtual-devices/nvram@3
net3                     /pci@7c0/pci@0/pci@2/network@0,1
net2                     /pci@7c0/pci@0/pci@2/network@0
net1                     /pci@780/pci@0/pci@1/network@0,1
net0                     /pci@780/pci@0/pci@1/network@0
net                      /pci@780/pci@0/pci@1/network@0
ide                      /pci@7c0/pci@0/pci@1/pci@0/ide@8
cdrom                    /pci@7c0/pci@0/pci@1/pci@0/ide@8/cdrom@0,0:f
disk3                    /pci@780/pci@0/pci@9/scsi@0/disk@3
disk2                    /pci@780/pci@0/pci@9/scsi@0/disk@2
disk1                    /pci@780/pci@0/pci@9/scsi@0/disk@1
disk0                    /pci@780/pci@0/pci@9/scsi@0/disk@0
disk                     /pci@780/pci@0/pci@9/scsi@0/disk@0
scsi                     /pci@780/pci@0/pci@9/scsi@0
virtual-console          /virtual-devices/console@1
name                     aliases


and try 'probe ide'

{0} ok probe-ide
  Device 0  ( Primary Master )
         Removable ATAPI Model: MATSHITACD-RW  CW-8124

  Device 1  ( Primary Slave )
         Not Present

  Device 2  ( Secondary Master )
         Not Present

  Device 3  ( Secondary Slave )
         Not Present

{0} ok

and this is the output when I boot from the T2000 cdrom drive (bootingopenbsd... netbsd isn't quite in shape yet...)


{0} ok boot cdrom
Boot device: /pci@7c0/pci@0/pci@1/pci@0/ide@8/cdrom@0,0:f  File and args:
OpenBSD IEEE 1275 Bootblock 1.4
..>> OpenBSD BOOT 1.7
Trying bsd...

open /pci@7c0/pci@0/pci@1/pci@0/ide@8/cdrom@0,0:f/etc/random.seed: No suchfile or directory

Booting /pci@7c0/pci@0/pci@1/pci@0/ide@8/cdrom@0,0:f/bsd
3963112@0x1000000+1816@0x13c78e8+3262896@0x1800000+931408@0x1b1c9b0
symbols @ 0xfef48300 120 start=0x1000000
console is /virtual-devices@100/console@1
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California.  All rights reserved.


OpenBSD 5.8 (RAMDISK) #631: Sun Aug 16 06:08:02 MDT 2015
    deraadt%sparc64.openbsd.org@localhost:/usr/src/sys/arch/sparc64/compile/RAMDISK
real mem = 1073741824 (1024MB)
avail mem = 1040998400 (992MB)
mainbus0 at root: SPARC Enterprise T2000
cpu0 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz
"SUNW,UltraSPARC-T1" at mainbus0 not configured
vbus0 at mainbus0
"flashprom" at vbus0 not configured
cbus0 at vbus0
"virtual-channel" at cbus0 not configured
"virtual-channel-client" at cbus0 not configured
"virtual-channel" at cbus0 not configured
"virtual-console-concentrator" at cbus0 not configured
"virtual-disk-server" at cbus0 not configured
"virtual-network-switch" at cbus0 not configured
vcons0 at vbus0: ivec 0x111, console
vrtc0 at vbus0
"fma" at vbus0 not configured
"sunvts" at vbus0 not configured
"sunmc" at vbus0 not configured
"explorer" at vbus0 not configured
"led" at vbus0 not configured
"flashupdate" at vbus0 not configured
vpci0 at mainbus0: bus 2 to 7, dvma map 80000000-ffffffff
pci0 at vpci0
ppb0 at pci0 dev 0 function 0 "PLX PEX 8532" rev 0xbc
pci1 at ppb0 bus 3
ppb1 at pci1 dev 1 function 0 "PLX PEX 8532" rev 0xbc
pci2 at ppb1 bus 4

em0 at pci2 dev 0 function 0 "Intel 82571EB" rev 0x06: ivec 0x795, address00:14:4f:82:91:00em1 at pci2 dev 0 function 1 "Intel 82571EB" rev 0x06: ivec 0x796, address00:14:4f:82:91:01

ppb2 at pci1 dev 2 function 0 "PLX PEX 8532" rev 0xbc
pci3 at ppb2 bus 5
ppb3 at pci1 dev 8 function 0 "PLX PEX 8532" rev 0xbc: msi
pci4 at ppb3 bus 6
ppb4 at pci1 dev 9 function 0 "PLX PEX 8532" rev 0xbc
pci5 at ppb4 bus 7
mpi0 at pci5 dev 0 function 0 "Symbios Logic SAS1064E" rev 0x02: msi
mpi0: UNUSED, firmware 1.9.0.0
scsibus0 at mpi0: 63 targets

sd0 at scsibus0 targ 0 lun 0: <FUJITSU, MAY2073RCSUN72G, 0501> SCSI20/direct fixed naa.500000e01825d170

sd0: 70007MB, 512 bytes/sector, 143374738 sectors

sd1 at scsibus0 targ 1 lun 0: <FUJITSU, MAY2073RCSUN72G, 0501> SCSI20/direct fixed naa.500000e016514640

sd1: 70007MB, 512 bytes/sector, 143374738 sectors

sd2 at scsibus0 targ 2 lun 0: <FUJITSU, MAY2073RCSUN72G, 0401> SCSI20/direct fixed naa.500000e012fcc090

sd2: 70007MB, 512 bytes/sector, 143374738 sectors

sd3 at scsibus0 targ 3 lun 0: <FUJITSU, MAY2073RCSUN72G, 0401> SCSI20/direct fixed naa.500000e012fc9b30

sd3: 70007MB, 512 bytes/sector, 143374738 sectors
vpci1 at mainbus0: bus 2 to 9, dvma map 80000000-ffffffff
pci6 at vpci1
ppb5 at pci6 dev 0 function 0 "PLX PEX 8532" rev 0xbc
pci7 at ppb5 bus 3
ppb6 at pci7 dev 1 function 0 "PLX PEX 8532" rev 0xbc
pci8 at ppb6 bus 4
ppb7 at pci8 dev 0 function 0 "Intel 41210 PCIE-PCIX" rev 0x09
pci9 at ppb7 bus 5
ebus0 at pci9 dev 2 function 0 "Acer Labs M1533 ISA" rev 0x00
com0 at ebus0 addr 3f8-3ff ivec 0x2: ns16550a, 16 byte fifo

ohci0 at pci9 dev 5 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x7c1,version 1.0, legacy supportohci1 at pci9 dev 6 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x7c3,version 1.0, legacy supportpciide0 at pci9 dev 8 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc4: DMA,channel 0 configured to native-PCI, channel 1 configured to native-PCI

pciide0: using ivec 0x7c4 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets

cd0 at scsibus1 targ 0 lun 0: <MATSHITA, CD-RW CW-8124, DZ15> ATAPI5/cdrom removable

cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
usb1 at ohci1: USB revision 1.0
uhub1 at usb1 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
ppb8 at pci8 dev 0 function 2 "Intel 41210 PCIE-PCIX" rev 0x09
pci10 at ppb8 bus 6
ppb9 at pci7 dev 2 function 0 "PLX PEX 8532" rev 0xbc
pci11 at ppb9 bus 7

em2 at pci11 dev 0 function 0 "Intel 82571EB" rev 0x06: ivec 0x7d6,address 00:14:4f:82:91:02em3 at pci11 dev 0 function 1 "Intel 82571EB" rev 0x06: ivec 0x7d7,address 00:14:4f:82:91:03

ppb10 at pci7 dev 8 function 0 "PLX PEX 8532" rev 0xbc: msi
pci12 at ppb10 bus 8
ppb11 at pci7 dev 9 function 0 "PLX PEX 8532" rev 0xbc: msi
pci13 at ppb11 bus 9

uhub2 at uhub1 port 1 "vendor 0x03eb Standard USB Hub" rev 1.10/3.00 addr2

softraid0 at root
scsibus2 at softraid0: 256 targets
bootpath: /pci@7c0,0/pci@0,0/pci@1,0/pci@0,0/ide@8,0/cdrom@0,0:f
root on rd0a swap on rd0b dump on rd0b
erase ^?, werase ^W, kill ^U, intr ^C, status ^T

Welcome to the OpenBSD/sparc64 5.8 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell?

Follow-Ups:
- Re: Will an Oracle T4-1 run NetBSD (yet)?
  - From: Fredrik Pettai

References:
- Will an Oracle T4-1 run NetBSD (yet)?
  - From: Fredrik Pettai
- Re: Will an Oracle T4-1 run NetBSD (yet)?
  - From: Martin Husemann
- Re: Will an Oracle T4-1 run NetBSD (yet)?
  - From: Palle Lyckegaard
- Re: Will an Oracle T4-1 run NetBSD (yet)?
  - From: Fredrik Pettai
- Re: Will an Oracle T4-1 run NetBSD (yet)?
  - From: Palle Lyckegaard
- Re: Will an Oracle T4-1 run NetBSD (yet)?
  - From: Fredrik Pettai

Prev by Date: Re: Will an Oracle T4-1 run NetBSD (yet)?
Next by Date: Re: Will an Oracle T4-1 run NetBSD (yet)?
Previous by Thread: Re: Will an Oracle T4-1 run NetBSD (yet)?
Next by Thread: Re: Will an Oracle T4-1 run NetBSD (yet)?
Indexes:

Home | Main Index | Thread Index | Old Index