my dmesg

[Abu Hussain Al Mukhtar <abuhussain%secure.mailbox.org@localhost>]

Hi! Attached you'll find the dmesgs of the two macppc machines I
am running the latest NetBSD snapshot on, which I send you in the
hope that they'll be useful.

All the best!

[     1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[     1.000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[     1.000000]     2018, 2019, 2020, 2021 The NetBSD Foundation, Inc.  All rights reserved.
[     1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[     1.000000]     The Regents of the University of California.  All rights reserved.

[     1.000000] NetBSD 9.99.86 (POWERMAC_G5) #0: Mon Jul  5 14:15:16 UTC 2021
[     1.000000] 	mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/macppc/compile/POWERMAC_G5
[     1.000000] total memory = 2048 MB
[     1.000000] oea_startup: failed to allocate DEAD ZONE: error=12
[     1.000000] avail memory = 1960 MB
[     1.000000] timecounter: Timecounters tick every 10.000 msec
[     1.000000] found openpic PIC at 80040000
[     1.000000] OpenPIC Version 1.2: Supports 4 CPUs and 120 interrupt sources.
[     1.000000] bootpath: /ht@0,f2000000/pci@4/ethernet@f:192.168.1.116,netbsd
[     1.000000] mainbus0 (root)
[     1.000000] cpu0 at mainbus0: 970FX (Revision 3.0), ID 0 (primary)
[     1.000000] cpu0: HID0 0x513081<NAP,DPM,NHR,TBCTRL,EXTBEN,ENATTN> 0x80000000<EMCP>, powersave: 1
[     1.000000] memory0 at mainbus0: len=512
[     1.000000] spdmem0 at memory0
[     1.000000] spdmem0: DDR SDRAM, no parity or ECC, 1GB, 400MHz (PC-3200)
[     1.000000] spdmem0: 13 rows, 11 cols, 2 ranks, 4 banks/chip, 5.0ns cycle time
[     1.000000] spdmem0: tAA-tRCD-tRP-tRAS: 2-3-3-8
[     1.000000] spdmem0: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
[     1.000000] spdmem1 at memory0
[     1.000000] spdmem1: DDR SDRAM, no parity or ECC, 1GB, 400MHz (PC-3200)
[     1.000000] spdmem1: 13 rows, 11 cols, 2 ranks, 4 banks/chip, 5.0ns cycle time
[     1.000000] spdmem1: tAA-tRCD-tRP-tRAS: 2-3-3-8
[     1.000000] spdmem1: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
[     1.000000] spdmem2 at memory0
[     1.000000] spdmem2: DDR SDRAM, no parity or ECC, 1GB, 400MHz (PC-3200)
[     1.000000] spdmem2: 13 rows, 11 cols, 2 ranks, 4 banks/chip, 5.0ns cycle time
[     1.000000] spdmem2: tAA-tRCD-tRP-tRAS: 2-3-3-8
[     1.000000] spdmem2: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
[     1.000000] spdmem3 at memory0
[     1.000000] spdmem3: DDR SDRAM, no parity or ECC, 1GB, 400MHz (PC-3200)
[     1.000000] spdmem3: 13 rows, 11 cols, 2 ranks, 4 banks/chip, 5.0ns cycle time
[     1.000000] spdmem3: tAA-tRCD-tRP-tRAS: 2-3-3-8
[     1.000000] spdmem3: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
[     1.000000] uni_n0 at mainbus0 address 0xf8000000
[     1.000000] uni_n0: found EEPROM data for CPU 0
[     1.000000] uni_n0: found EEPROM data for CPU 1
[     1.000000] ki2c0 at uni_n0 address 0xf8001000
[     1.000000] iic0 at ki2c0: I2C bus
[     1.000000] i2c-hwclock at iic0 addr 0x69 not configured
[     1.000000] lmtemp0 at iic0 addr 0x4a: temp-monitor DS75 Temperature Sensor
[     1.000000] admtemp0 at iic0 addr 0x4c: MAX6690 temperature sensor: id. 0x4d, rev. 0x09
[     1.000000] dstemp0 at iic0 addr 0x4b: DS1361
[     1.000000] fcu0 at iic0 addr 0xaf: Fan Control Unit
[     1.000000] i2c-cpu-voltage at iic0 addr 0x18 not configured
[     1.000000] adadc0 at iic0 addr 0x2c: AD7417
[     1.000000] cpuid at iic0 addr 0x50 not configured
[     1.000000] i2c-cpu-voltage at iic0 addr 0x19 not configured
[     1.000000] adadc1 at iic0 addr 0x2d: AD7417
[     1.000000] cpuid at iic0 addr 0x51 not configured
[     1.000000] cereal at iic0 addr 0xe0 not configured
[     1.000000] dart at uni_n0 address 0xf8033000 not configured
[     1.000000] mpic at uni_n0 address 0xf8040000 not configured
[     1.000000] uninorth0 at mainbus0
[     1.000000] pci0 at uninorth0 bus 0
[     1.000000] pci0: i/o space, memory space enabled
[     1.000000] pchb0 at pci0 dev 11 function 0
[     1.000000] pchb0: vendor 106b product 0059 (rev. 0x00)
[     1.000000] radeonfb0 at pci0 dev 16 function 0: vendor 1002 product 4150 (rev. 0x00)
[     1.000000] trying to read disabled BIOS...
[     1.000000] radeonfb0: No video BIOS, using default clocks
[     1.000000] radeonfb0: refclk = 27.000 MHz, refdiv = 12 minpll = 125000, maxpll = 400000
[     1.000000] no data for est. mode 640x480x67
[     1.000000] no data for est. mode 640x480x67
[     1.000000] radeonfb0: 64 MB aperture at 0x98000000, 64 KB registers at 0x90000000
[     1.000000] radeonfb0: display 0: initial virtual resolution 1280x1024 at 8 bpp
[     1.000000] radeonfb0: using 32 MB per display
[     1.000000] radeonfb0: port 0: physical 1280x1024 60Hz
[     1.000000] radeonfb0: port 1: physical 1280x1024 60Hz
[     1.000000] wsdisplay0 at radeonfb0 kbdmux 1: console (fb, vt100 emulation)
[     1.000000] wsmux1: connecting to wsdisplay0
[     1.000000] drm at radeonfb0 not configured
[     1.000000] ibmcpc0 at mainbus0
[     1.000000] Mapping in config space @ pa 0xf2000000, size: 0x02800000
[     1.000000] pci1 at ibmcpc0 bus 1
[     1.000000] pci1: i/o space, memory space enabled
[     1.000000] obio0 at pci1 dev 7 function 0: addr 0x80000000
[     1.000000] mpic at obio0 offset 0x40000 not configured
[     1.000000] zsc0 at obio0 irq 22,23
[     1.000000] zstty0 at zsc0 channel 0
[     1.000000] zstty1 at zsc0 channel 1
[     1.000000] ki2c1 at obio0
[     1.000000] iic1 at ki2c1: I2C bus
[     1.000000] cereal at iic1 addr 0xe0 not configured
[     1.000000] deq0 at iic1 addr 0x35 Audio Codec (tas3004)
[     1.000000] snapper0 at obio0 offset 0x10000: irq 30,1,2
[     1.000000] pmu0 at obio0 offset 0x16000 irq 25:  rev. 12
[     1.000000] pmu0: initializing IIC bus
[     1.000000] iic2 at pmu0: I2C bus
[     1.000000] pmu0: initializing RTC
[     1.000000] pmu0: power-mgt not configured
[     1.000000] fans at obio0 offset 0x4c not configured
[     1.000000] model PowerMac7,3
[     1.000000] snapper0: codec: TAS3004
[     1.000000] audio0 at snapper0: playback, capture, full duplex
[     1.000000] audio0: slinear_be:16 -> slinear_be:16 2ch 48000Hz, blk 12288 bytes (64ms) for playback
[     1.000000] audio0: slinear_be:16 <- slinear_be:16 2ch 48000Hz, blk 12288 bytes (64ms) for recording
[     1.000000] spkr0 at audio0: PC Speaker (synthesized)
[     1.000000] wsbell0 at spkr0 mux 1
[     1.000000] ohci0 at pci1 dev 8 function 0: vendor 106b product 0040 (rev. 0x00)
[     1.000000] ohci0: interrupting at irq 27
[     1.000000] ohci0: OHCI version 1.0, legacy support
[     1.000000] usb0 at ohci0: USB revision 1.0
[     1.000000] ohci1 at pci1 dev 9 function 0: vendor 106b product 0040 (rev. 0x00)
[     1.000000] ohci1: interrupting at irq 28
[     1.000000] ohci1: OHCI version 1.0, legacy support
[     1.000000] usb1 at ohci1: USB revision 1.0
[     1.000000] pci2 at ibmcpc0 bus 5
[     1.000000] pci2: i/o space, memory space enabled
[     1.000000] ohci2 at pci2 dev 11 function 0: vendor 1033 product 0035 (rev. 0x43)
[     1.000000] ohci2: interrupting at irq 63
[     1.000000] ohci2: OHCI version 1.0
[     1.000000] usb2 at ohci2: USB revision 1.0
[     1.000000] ohci3 at pci2 dev 11 function 1: vendor 1033 product 0035 (rev. 0x43)
[     1.000000] ohci3: interrupting at irq 63
[     1.000000] ohci3: OHCI version 1.0
[     1.000000] usb3 at ohci3: USB revision 1.0
[     1.000000] ehci0 at pci2 dev 11 function 2: vendor 1033 product 00e0 (rev. 0x04)
[     1.000000] ehci0: interrupting at irq 63
[     1.000000] ehci0: EHCI version 1.0
[     1.000000] ehci0: 2 companion controllers, 3 ports each: ohci2 ohci3
[     1.000000] usb4 at ehci0: USB revision 2.0
[     1.000000] pci3 at ibmcpc0 bus 2
[     1.000000] pci3: i/o space, memory space enabled
[     1.000000] wdc0 at pci3 dev 13 function 0: interrupting at irq 39
[     1.000000] atabus0 at wdc0 channel 0
[     1.000000] vendor 106b product 0042 (IEEE1394 serial bus, OpenHCI) at pci3 dev 14 function 0 not configured
[     1.000000] pci4 at ibmcpc0 bus 3
[     1.000000] pci4: i/o space, memory space enabled
[     1.000000] gem0 at pci4 dev 15 function 0: vendor 106b product 004c (rev. 0x00)
[     1.000000] gem0: interrupting at irq 41
[     1.000000] brgphy0 at gem0 phy 1: BCM54K2 1000BASE-T media interface, rev. 0
[     1.000000] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[     1.000000] gem0: Ethernet address 00:14:51:07:08:70, 10KB RX fifo, 4KB TX fifo
[     1.000000] pci5 at ibmcpc0 bus 4
[     1.000000] pci5: i/o space, memory space enabled
[     1.000000] svwsata0 at pci5 dev 12 function 0: ServerWorks K2 SATA Controller (rev. 0x00)
[     1.000000] svwsata0: bus-master DMA support present
[     1.000000] svwsata0: using irq 0 for native-PCI interrupt
[     1.000000] svwsata0: primary channel wired to native-PCI mode
[     1.000000] atabus1 at svwsata0 channel 0
[     1.000000] svwsata0: secondary channel wired to native-PCI mode
[     1.000000] atabus2 at svwsata0 channel 1
[     1.000000] svwsata0: secondary channel wired to compatibility mode
[     1.000000] atabus3 at svwsata0 channel 2
[     1.000000] svwsata0: secondary channel configured to compatibility mode
[     1.000000] atabus4 at svwsata0 channel 3
[     1.000000] svwsata1 at pci5 dev 12 function 1: ServerWorks K2 SATA Controller (rev. 0x00)

[     1.000000] vmmask 65f80000 schedmask 7ff80000 highmask 7ff80000
[     1.000000] entropy: WARNING: extracting entropy too early
[     1.000000] timecounter: Timecounter "mftb" frequency 33333333 Hz quality 100
[     1.000003] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[     1.059998] aes: BearSSL aes_ct
[     1.059998] aes_ccm: self-test passed
[     1.059998] chacha: Portable C ChaCha
[     1.059998] blake2s: self-test passed
[     1.079996] uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[     1.079996] uhub0: 2 ports with 2 removable, self powered
[     1.079996] uhub1 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[     1.079996] uhub1: 2 ports with 2 removable, self powered
[     1.079996] uhub2 at usb2: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[     1.079996] uhub2: 3 ports with 3 removable, self powered
[     1.079996] uhub3 at usb3: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[     1.079996] uhub3: 2 ports with 2 removable, self powered
[     1.079996] uhub4 at usb4: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[     1.079996] uhub4: 5 ports with 5 removable, self powered
[     1.159996] atapibus0 at atabus0: 2 targets
[     1.169998] cd0 at atapibus0 drive 0: <PIONEER DVD-RW  DVR-109, EDDL079494WL, A912> cdrom removable
[     1.169998] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
[     1.169998] cd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) (using DMA)
[     2.169998] svwsata0 port 0: PHY offline
[     2.169998] svwsata0 port 1: PHY offline
[     2.169998] svwsata0 port 2: PHY offline
[     2.169998] svwsata0 port 3: PHY offline
[     2.389998] ehci0: handing over full speed device on port 4 to ohci3
[     2.449998] WARNING: 2 errors while detecting hardware; check system log.
[     2.449998] boot device: gem0
[     2.449998] root on gem0
[     2.453071] nfs_boot: trying DHCP/BOOTP
[     3.929998] uhub5 at uhub3 port 2: Mitsumi Electric (0x05ac) Hub in Apple Extended USB Keyboard (0x1002), class 9/0, rev 1.10/1.22, addr 2
[     3.940000] uhub5: 3 ports with 2 removable, bus powered
[     5.260001] uhidev0 at uhub5 port 1 configuration 1 interface 0
[     5.260001] uhidev0: Mitsumi Electric (0x05ac) Apple Extended USB Keyboard (0x0205), rev 1.10/1.22, addr 3, iclass 3/1
[     5.260001] ukbd0 at uhidev0
[     5.460001] nfs_boot: DHCP next-server: 192.168.1.116
[     5.460001] nfs_boot: my_addr=192.168.1.117
[     5.460001] nfs_boot: my_mask=255.255.255.0
[     5.460001] nfs_boot: gateway=192.168.1.1
[     5.670001] wskbd0 at ukbd0: console keyboard, using wsdisplay0
[     5.670001] uhidev1 at uhub5 port 1 configuration 1 interface 1
[     5.670001] uhidev1: Mitsumi Electric (0x05ac) Apple Extended USB Keyboard (0x0205), rev 1.10/1.22, addr 3, iclass 3/0
[     5.680002] uhidev1: 3 report ids
[     5.680002] uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
[     5.680002] uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
[    14.479999] root on 192.168.1.116:/var/diskless/g5/root
[    14.479999] root file system type: nfs
[    14.479999] kern.module.path=/stand/macppc/9.99.86/modules
[    14.479999] WARNING: clock gained 5 days
[    15.620002] 192.168.1.116:/var/diskless/g5/root: inaccurate wcc data (ctime) detected, disabling wcc (ctime 1625594052.743728000 1625594052.743728000, mtime 1626061051.912559000 1625763604.946360000)
[   497.920072] ehci0: handing over full speed device on port 3 to ohci2
[   499.860071] SanDisk (0x0781) Ultra Fit (0x5583), class 0/0, rev 2.10/1.00, addr 2, uhub4 port 3 not configured
[   583.060094] ehci0: handing over full speed device on port 3 to ohci2
[   587.640101] SanDisk (0x0781) Ultra Fit (0x5583), class 0/0, rev 2.10/1.00, addr 2, uhub4 port 3 not configured
[   692.640243] ukbd0: was console keyboard
[   692.640243] wskbd0: detached
[   692.640243] ukbd0: detached
[   692.640243] uhidev0: detached
[   692.640243] uhidev0: at uhub5 port 1 (addr 3) disconnected
[   692.640243] uhid0: detached
[   692.640243] uhid1: detached
[   692.640243] uhidev1: detached
[   692.640243] uhidev1: at uhub5 port 1 (addr 3) disconnected
[   692.660249] uhub5: detached
[   692.660249] uhub5: at uhub3 port 2 (addr 2) disconnected
[   695.130243] ehci0: handing over full speed device on port 4 to ohci3
[   696.670242] uhub5 at uhub3 port 2: Mitsumi Electric (0x05ac) Hub in Apple Extended USB Keyboard (0x1002), class 9/0, rev 1.10/1.22, addr 2
[   696.680244] uhub5: 3 ports with 2 removable, bus powered
[   698.000244] uhidev0 at uhub5 port 1 configuration 1 interface 0
[   698.000244] uhidev0: Mitsumi Electric (0x05ac) Apple Extended USB Keyboard (0x0205), rev 1.10/1.22, addr 3, iclass 3/1
[   698.000244] ukbd0 at uhidev0
[   698.410244] wskbd0 at ukbd0: console keyboard, using wsdisplay0
[   698.410244] uhidev1 at uhub5 port 1 configuration 1 interface 1
[   698.410244] uhidev1: Mitsumi Electric (0x05ac) Apple Extended USB Keyboard (0x0205), rev 1.10/1.22, addr 3, iclass 3/0
[   698.420245] uhidev1: 3 report ids
[   698.420245] uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
[   698.420245] uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
[   721.930241] netbootserver:/var/diskless/g5/root/home: inaccurate wcc data (ctime) detected, disabling wcc (ctime 1625763839.689799000 1625763839.689799000, mtime 1626061759.744860000 1625594088.000000000)

[     1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[     1.000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[     1.000000]     2018, 2019, 2020, 2021 The NetBSD Foundation, Inc.  All rights reserved.
[     1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[     1.000000]     The Regents of the University of California.  All rights reserved.

[     1.000000] NetBSD 9.99.86 (GENERIC) #0: Mon Jul  5 14:15:16 UTC 2021
[     1.000000] 	mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/macppc/compile/GENERIC
[     1.000000] total memory = 512 MB
[     1.000000] avail memory = 480 MB
[     1.000000] timecounter: Timecounters tick every 10.000 msec
[     1.000000] Kernelized RAIDframe activated
[     1.000000] found openpic PIC at 80040000
[     1.000000] OpenPIC Version 1.2: Supports 4 CPUs and 64 interrupt sources.
[     1.000000] bootpath: /pci@f4000000/ata-6@d/disk@0:0/netbsd
[     1.000000] mainbus0 (root)
[     1.000000] cpu0 at mainbus0: 7447A (Revision 1.2), ID 0 (primary)
[     1.000000] cpu0: HID0 0x84d0c1bc<EMCP,TBEN,HIGH_BAT_EN,NAP,DPM,ICE,DCE,XBSEN,SGE,BTIC,LRSTK,FOLD,BHT>, powersave: 1
[     1.000000] cpu0: 1250.00 MHz, 512KB L2 cache no parity
[     1.000000] memory0 at mainbus0: len=128
[     1.000000] spdmem0 at memory0
[     1.000000] spdmem0: DDR SDRAM, no parity or ECC, 512MB, 400MHz (PC-3200)
[     1.000000] spdmem0: 13 rows, 10 cols, 2 ranks, 4 banks/chip, 5.0ns cycle time
[     1.000000] spdmem0: tAA-tRCD-tRP-tRAS: 2-3-3-8
[     1.000000] spdmem0: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
[     1.000000] uni_n0 at mainbus0 address 0xf8000000
[     1.000000] hw-clock at uni_n0 not configured
[     1.000000] ki2c0 at uni_n0 address 0xf8001000
[     1.000000] iic0 at ki2c0: I2C bus
[     1.000000] cereal at iic0 addr 0xe0 not configured
[     1.000000] uninorth0 at mainbus0
[     1.000000] pci0 at uninorth0 bus 0
[     1.000000] pci0: i/o space, memory space enabled
[     1.000000] pchb0 at pci0 dev 11 function 0
[     1.000000] pchb0: Apple Computer UniNorth AGP Bridge (rev. 0x00)
[     1.000000] radeonfb0 at pci0 dev 16 function 0: ATI Technologies Radeon 9200 5962 (rev. 0x01)
[     1.000000] trying to read disabled BIOS...
[     1.000000] radeonfb0: No video BIOS, using default clocks
[     1.000000] radeonfb0: refclk = 27.000 MHz, refdiv = 12 minpll = 125000, maxpll = 400000
[     1.000000] radeonfb0: 64 MB aperture at 0x98000000, 64 KB registers at 0x90000000
[     1.000000] radeonfb0: display 0: initial virtual resolution 1280x1024 at 8 bpp
[     1.000000] radeonfb0: using 32 MB per display
[     1.000000] radeonfb0: port 0: physical 1280x1024 60Hz
[     1.000000] radeonfb0: port 1: physical 1280x1024 60Hz
[     1.000000] wsdisplay0 at radeonfb0 kbdmux 1: console (fb, vt100 emulation)
[     1.000000] wsmux1: connecting to wsdisplay0
[     1.000000] drm at radeonfb0 not configured
[     1.000000] uninorth1 at mainbus0
[     1.000000] pci1 at uninorth1 bus 0
[     1.000000] pci1: i/o space, memory space enabled
[     1.000000] pchb1 at pci1 dev 11 function 0
[     1.000000] pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
[     1.000000] obio0 at pci1 dev 23 function 0: addr 0x80000000
[     1.000000] zsc0 at obio0 irq 22,23
[     1.000000] zstty0 at zsc0 channel 0
[     1.000000] zstty1 at zsc0 channel 1
[     1.000000] snapper0 at obio0 offset 0x10000: irq 30,1,2
[     1.000000] pmu0 at obio0 offset 0x16000 irq 47:  rev. 85
[     1.000000] pmu0: initializing IIC bus
[     1.000000] iic1 at pmu0: I2C bus
[     1.000000] admtemp0 at iic1 addr 0x48: MAX6642 temperature sensor: id. 0x4d, rev. 0x4d
[     1.000000] pmu0: initializing RTC
[     1.000000] pmu0: power-mgt not configured
[     1.000000] pmu0: pmu-pwm-fans not configured
[     1.000000] ki2c1 at obio0
[     1.000000] iic2 at ki2c1: I2C bus
[     1.000000] cereal at iic2 addr 0xe0 not configured
[     1.000000] wdc0 at obio0 offset 0x20000 irq 24, level triggered: DMA transfer
[     1.000000] atabus0 at wdc0 channel 0
[     1.000000] snapper0: software codec
[     1.000000] audio0 at snapper0: playback, capture, full duplex
[     1.000000] audio0: slinear_be:16 -> slinear_be:16 2ch 48000Hz, blk 12288 bytes (64ms) for playback
[     1.000000] audio0: slinear_be:16 <- slinear_be:16 2ch 48000Hz, blk 12288 bytes (64ms) for recording
[     1.000000] spkr0 at audio0: PC Speaker (synthesized)
[     1.000000] wsbell at spkr0 not configured
[     1.000000] ohci0 at pci1 dev 24 function 0: Apple Computer Intrepid USB Controller (rev. 0x00)
[     1.000000] ohci0: autoconfiguration error: memory access is disabled
[     1.000000] ohci1 at pci1 dev 25 function 0: Apple Computer Intrepid USB Controller (rev. 0x00)
[     1.000000] ohci1: autoconfiguration error: memory access is disabled
[     1.000000] ohci2 at pci1 dev 26 function 0: Apple Computer Intrepid USB Controller (rev. 0x00)
[     1.000000] ohci2: interrupting at irq 29
[     1.000000] ohci2: OHCI version 1.0, legacy support
[     1.000000] usb0 at ohci2: USB revision 1.0
[     1.000000] ohci3 at pci1 dev 27 function 0: NEC USB Host Controller (rev. 0x43)
[     1.000000] ohci3: interrupting at irq 63
[     1.000000] ohci3: OHCI version 1.0
[     1.000000] usb1 at ohci3: USB revision 1.0
[     1.000000] ohci4 at pci1 dev 27 function 1: NEC USB Host Controller (rev. 0x43)
[     1.000000] ohci4: interrupting at irq 63
[     1.000000] ohci4: OHCI version 1.0
[     1.000000] usb2 at ohci4: USB revision 1.0
[     1.000000] ehci0 at pci1 dev 27 function 2: NEC USB2 Host Controller (rev. 0x04)
[     1.000000] ehci0: interrupting at irq 63
[     1.000000] ehci0: EHCI version 1.0
[     1.000000] ehci0: 2 companion controllers, 3 ports each: ohci3 ohci4
[     1.000000] usb3 at ehci0: USB revision 2.0
[     1.000000] uninorth2 at mainbus0
[     1.000000] pci2 at uninorth2 bus 0
[     1.000000] pci2: i/o space, memory space enabled
[     1.000000] pchb2 at pci2 dev 11 function 0
[     1.000000] pchb2: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
[     1.000000] wdc1 at pci2 dev 13 function 0: interrupting at irq 39
[     1.000000] atabus1 at wdc1 channel 0
[     1.000000] fwohci0 at pci2 dev 14 function 0: Apple Computer UniNorth Firewire (rev. 0x81)
[     1.000000] fwohci0: interrupting at irq 40
[     1.000000] fwohci0: OHCI version 1.10 (ROM=0)
[     1.000000] fwohci0: No. of Isochronous channels is 8.
[     1.000000] fwohci0: EUI64 00:0d:93:ff:fe:65:a8:68
[     1.000000] fwohci0: Phy 1394a available S400, 2 ports.
[     1.000000] fwohci0: Link S400, max_rec 2048 bytes.
[     1.000000] ieee1394if0 at fwohci0: IEEE1394 bus
[     1.000000] fwip0 at ieee1394if0: IP over IEEE1394
[     1.000000] fwohci0: Initiate bus reset
[     1.000000] fwohci0: Clear PME# now
[     1.000000] gem0 at pci2 dev 15 function 0: Apple Computer GMAC Ethernet (rev. 0x80)
[     1.000000] gem0: interrupting at irq 41
[     1.000000] bmtphy0 at gem0 phy 0: BCM5221 10/100 media interface, rev. 4
[     1.000000] bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[     1.000000] gem0: Ethernet address 00:0d:93:65:a8:68, 10KB RX fifo, 4KB TX fifo
[     1.000000] vmmask 66f80000 schedmask 7ff80000 highmask 7ff80000
[     1.000000] entropy: WARNING: extracting entropy too early
[     1.000000] timecounter: Timecounter "mftb" frequency 41620997 Hz quality 100
[     1.000021] fwohci0: BUS reset
[     1.000021] fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode
[     1.000021] ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
[     1.000021] ieee1394if0: bus manager 0
[     1.000021] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[     1.070013] IPsec: Initialized Security Association Processing.
[     1.070013] aes: BearSSL aes_ct
[     1.070013] aes_ccm: self-test passed
[     1.070013] chacha: Portable C ChaCha
[     1.070013] blake2s: self-test passed
[     1.070013] uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[     1.070013] uhub0: 2 ports with 2 removable, self powered
[     1.070013] uhub1 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[     1.070013] uhub1: 3 ports with 3 removable, self powered
[     1.070013] uhub2 at usb2: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[     1.070013] uhub2: 2 ports with 2 removable, self powered
[     1.070013] uhub3 at usb3: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[     1.070013] uhub3: 5 ports with 5 removable, self powered
[     1.219992] atapibus0 at atabus1: 2 targets
[     1.219992] cd0 at atapibus0 drive 1: <MATSHITACD-RW  CW-8124, , DACD> cdrom removable
[     1.229994] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
[     1.229994] wd0 at atabus1 drive 0
[     1.229994] wd0: <ST940110A>
[     1.229994] wd0: drive supports 16-sector PIO transfers, LBA48 addressing
[     1.229994] wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
[     1.679993] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
[     1.679993] wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
[     1.679993] cd0(wdc1:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) (using DMA)
[     2.439991] swwdog0: software watchdog initialized
[     2.449995] WARNING: 2 errors while detecting hardware; check system log.
[     2.449995] boot device: wd0
[     2.459993] root on wd0a dumps on wd0b
[     2.479992] root file system type: ffs
[     2.479992] kern.module.path=/stand/macppc/9.99.86/modules
[     2.479992] WARNING: clock gained 3 days
[     3.919999] uhub4 at uhub1 port 1: Mitsumi Electric (0x05ac) Hub in Apple Extended USB Keyboard (0x1002), class 9/0, rev 1.10/1.22, addr 2
[     3.930002] uhub4: 3 ports with 2 removable, bus powered
[     5.240007] uhidev0 at uhub4 port 1 configuration 1 interface 0
[     5.240007] uhidev0: Mitsumi Electric (0x05ac) Apple Extended USB Keyboard (0x0205), rev 1.10/1.22, addr 3, iclass 3/1
[     5.240007] ukbd0 at uhidev0: 8 Variable keys, 6 Array codes
[     5.650004] wskbd0 at ukbd0 mux 1
[     5.650004] wskbd0: connecting to wsdisplay0
[     5.650004] uhidev1 at uhub4 port 1 configuration 1 interface 1
[     5.650004] uhidev1: Mitsumi Electric (0x05ac) Apple Extended USB Keyboard (0x0205), rev 1.10/1.22, addr 3, iclass 3/0
[     5.660013] uhidev1: 3 report ids
[     5.660013] uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
[     5.660013] uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
[    21.860070] umass0 at uhub3 port 2 configuration 1 interface 0
[    21.860070] umass0: SanDisk (0x0781) Ultra Fit (0x5583), rev 2.10/1.00, addr 2
[    21.860070] umass0: using SCSI over Bulk-Only
[    21.860070] scsibus0 at umass0: 2 targets, 1 lun per target
[    21.870070] sd0 at scsibus0 target 0 lun 0: <SanDisk, Ultra Fit, 1.00> disk removable
[    21.870070] sd0: 59232 MB, 65535 cyl, 16 head, 63 sec, 512 bytes/sect x 121307136 sectors