Port-hpcsh archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: Jornada 680 asks for "root device"
Retried everything using the current snapshot with the same result.
Kernel acts as if it doesn't find wd0.
I noticed that if I "sh MAKEDEV all" in the mounted CF partition,
afterwards I can only unmount using "umount -f". All of the node seem
to be created properly, though, so I'm at a loss to explain this, and
I don't know what could be causing the problem.
Could the version hpcboot matter. I notice the version I am using
defaults to using hpnetbsd.gz, while I am using an unzipped kernel.
I'd appreciate any help for how to troubleshoot this problem.
This is the fdisk for the CF card:
[/var/cfmnt]#fdisk wd1
Disk: /dev/rwd1d
NetBSD disklabel disk geometry:
cylinders: 993, heads: 16, sectors/track: 63 (1008 sectors/cylinder)
total sectors: 1000944
BIOS disk geometry:
cylinders: 993, heads: 16, sectors/track: 63 (1008 sectors/cylinder)
total sectors: 1000944
Partition table:
0: Primary DOS with 32 bit FAT (sysid 11)
start 63, size 20097 (10 MB, Cyls 0-20), Active
1: NetBSD (sysid 169)
start 20160, size 980784 (479 MB, Cyls 20-993)
2: <UNUSED>
3: <UNUSED>
NetBSD2 Live! : root@tpnetbsd
[/var/cfmnt]#
This is the disklabel:
[/var/cfmnt]#disklabel wd1
# /dev/rwd1d:
type: ESDI
disk: SanDisk SDCFB-51
label: fictitious
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 16
sectors/cylinder: 1008
cylinders: 993
total sectors: 1000944
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0 # microseconds
track-to-track seek: 0 # microseconds
drivedata: 0
6 partitions:
# size offset fstype [fsize bsize cpg/sgs]
a: 980784 20160 4.2BSD 1024 8192 44584 # (Cyl. 20 - 992)
c: 980784 20160 unused 0 0 # (Cyl. 20 - 992)
d: 1000944 0 unused 0 0 # (Cyl. 0 - 992)
e: 20097 63 MSDOS # (Cyl. 0*- 19)
NetBSD2 Live! : root@tpnetbsd
[/var/cfmnt]#
Mike
Home |
Main Index |
Thread Index |
Old Index