Re: NetBSD 10.1 on Hades

[Artur <artik-wroc%o2.pl@localhost>]

Hi, thank you for your answer.

> Wow. Working Hades in 2025!?

Supposedly, somewhere at the other end of the world, there is another one :)

> > First it didn't read the diskette correctly to load SYSINST.FS.

[  10.8839548] root on md2a dumps on md2b
[  13.5156280] hdfd0: timeout (st0 0xc0<invld,abnrml> cyl 0)
[  13.5484242] fd0c: hard error reading fsbn 0 of 0-15 (st0 
0xc0<invld,abnrml> st1 0 st2 0 cyl 0 head
 0 sec 1)
[  16.0312530] hdfd0: timeout (st0 0xc0<invld,abnrml> cyl 0)
[  16.0640492] fd0d: hard error reading fsbn 0 of 0-35 (st0 
0xc0<invld,abnrml> st1 0 st2 0 cyl 0 head
 0 sec 1)
[  16.1337921] .
[  16.1504750] vfs_mountroot: can't open root device
[  16.1634958] cannot mount root, error = 6

> How did you load kernel and try to load sysinst.fs?
> By LOADBSD.TTP with "-b" option to specify "md2" to load sysinst.fs

Yes. LOADBSD.TTP -b NETBSD_H

Attempting to read data from a CD:

[ 171.1407908] cd0a: error reading fsbn 352808 of 352808-352935 (cd0 bn 
352808;
 36% |************                       |  1024 KiB  339.70 KiB/s 
00:05 ETA[

[ 171.5313344] cd0a: error reading fsbn 353064 of 353064-353191 (cd0 bn 
353064;

 85% |*****************************      |  2368 KiB  472.37 KiB/s 
00:00 ETAg
zip: invalid compressed data--crc error
sysinst: read: Input/output error

Preparing partitions on the disk:
http://artik78.vot.pl/pliki/partition.jpg
http://artik78.vot.pl/pliki/disklabel.jpg


     Status: Finished
    Command: /usr/mdec/installboot -v /dev/rwd1c
     Hit enter to continue
--------------------------------------------------------------------------------
AHDI      boot loader: /usr/mdec/std/wdb00t.ahdi
Primary   boot loader: /usr/mdec/std/xxboot.ahdi
Secondary boot loader: /usr/mdec/std/bootxx
Boot block installed on /dev/rwd1c (sector 2779181)
AHDI root installed on /dev/rwd1c (sector 0)
Boot preference set to NetBSD.



     Status: Command failed
    Command: /sbin/fsck_ffs -p -q /dev/rwd1a
     Hit enter to continue
--------------------------------------------------------------------------------
/dev/rwd1a: DIRECTORY CORRUPTED  I=10624  OWNER=0 MODE=40755
/dev/rwd1a: SIZE=512 MTIME=Apr 10 11:29 2025
DIR=?
/dev/rwd1a: UNEXPECTED INCONSISTENCY; RUN fsck_ffs MANUALLY.



     Status: Command failed
    Command: /sbin/mount -rt msdos /dev/wd0b /mnt2
     Hit enter to continue
--------------------------------------------------------------------------------
mount_msdos: /dev/wd0b on /mnt2: Device not configured



     Status: Finished
    Command: /sbin/fsck_ffs -p -q /dev/rwd1d
     Hit enter to continue
--------------------------------------------------------------------------------
/dev/rwd1d: 1 files, 1 used, 661239 free (15 frags, 82653 blocks, 0.0% 
fragmenta
tion)
/dev/rwd1d: MARKING FILE SYSTEM CLEAN


System boot:


[   1.0000000]     2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 
2013,
[   1.0000000]     2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 
2023,
[   1.0000000]     2024
[   1.0000000]     The NetBSD Foundation, Inc.  All rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All 
rights reserved.

[   1.0000000] NetBSD 10.1 (HADES) #0: Mon Dec 16 13:08:11 UTC 2024
[   1.0000000] 
mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/atari/compile/HADES
[   1.0000000] Atari Hades (MC68060 rev.1 CPU/MMU/FPU)
[   1.0000000] total memory = 192 MB
[   1.0000000] avail memory = 185 MB
[   1.0000000] mainbus0 (root)
[   1.0000000] clock0 at mainbus0: system hz 64 timer-A divisor 200/192
[   1.0000030] grfbus0 at mainbus0
[   1.0000030] kbd0 at mainbus0
[   1.0000030] fdc0 at mainbus0: no fifo
[   1.0000030] hdfd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
[   1.0000030] ser0 at mainbus0: modem1 on 68901 MFP1 USART
[   1.0000030] zs0 at mainbus0: serial2 on channel a and modem2 on channel b
[   1.0000030] ncrscsi0 at mainbus0
[   1.0000030] scsibus0 at ncrscsi0 channel 0: 8 targets, 8 luns per target
[   1.0000030] nvr0 at mainbus0
[   1.0000030] lp0 at mainbus0
[   1.0000030] wdc0 at mainbus0
[   1.0000030] atabus0 at wdc0 channel 0
[   1.0000030] isab0 at mainbus0
[   1.0000030] isa0 at isab0
[   1.0000030] ne0 at isa0 port 0x300-0x31f irq 5
[   1.0000030] ne0: NE2000 (RTL8019) Ethernet
[   1.0000030] ne0: Ethernet address
[   1.0000030] ne0: 10base2, 10baseT, 10baseT-FDX, auto, default [0x00 
0x90] auto
[   1.0000030] pcib0 at mainbus0
[   1.0000030] pci0 at pcib0
[   1.0000030] vendor 10ec product 8029 (ethernet network) at pci0 dev 1 
function 0 not configured
[   1.0000030] vendor 1274 product 1371 (audio multimedia, revision 
0x08) at pci0 dev 2 function 0 no
t configured
[   1.0000030] vendor 1002 product 4758 (VGA display, revision 0x03) at 
pci0 dev 3 function 0 not con
figured
[   1.0000030] avmebus0 at mainbus0
[   1.0000030] vme0 at avmebus0
[   1.0000030] WARNING: system needs entropy for security; see entropy(7)
[   1.0000030] scsibus0: waiting 2 seconds for devices to settle...
[   1.0313344] wd0 at atabus0 drive 0
[   1.0673044] wd0: <SFCF2048H1BO2TO-I-M0-543-ALU>
[   1.0926137] wd0: 1953 MB, 3970 cyl, 16 head, 63 sec, 512 bytes/sect x 
4001760 sectors
[   1.1094594] wd1 at atabus0 drive 1
[   1.1266306] wd1: <SFCF2048H1BO2TO-I-M0-543-ALU>
[   1.1446156] wd1: 1953 MB, 3970 cyl, 16 head, 63 sec, 512 bytes/sect x 
4001760 sectors
[   3.0156280] probe(ncrscsi0:0:0:0): Does not support linked commands
[   3.0626658] cd0 at scsibus0 target 0 lun 0: <PIONEER, DVD-ROM 
DVD-303R, 1.09> cdrom removable
[  10.6093780] 4 views configured
[  10.6316762] 1 mouse configured
[  10.6525095] md0: auto-load on open. Size 1105920 bytes.
[  10.6687042] md1: auto-load on open. Size 1474560 bytes.
[  10.6849802] md2: auto-load on open. Size 1474560 bytes.
[  10.7010935] root device: md2a
[  10.7969594] dump device (default md2b):
[  10.8440785] file system (default generic):