2022-08-28-netbsd-raspi-aarch64.img

[Jun Ebihara <jun%soum.co.jp@localhost>]

I've updated 2022-08-28-netbsd-raspi-aarch64.img.gz for RPI4.

https://cdn.netbsd.org/pub/NetBSD/misc/jun/raspberry-pi/2022-08-28-aarch64/2022-08-28-netbsd-raspi-aarch64.img.gz
https://cdn.netbsd.org/pub/NetBSD/misc/jun/raspberry-pi/2022-08-28-aarch64/MD5

Topics:
- NetBSD-9.99.99
- g++-10.4.0
- gcc-10.4.0
- git-base-2.37.2

- openssh 9.0 https://www.openssh.com/txt/release-9.0

"This release switches scp(1) from using the legacy scp/rcp protocol
to using the SFTP protocol by default."
"In case of incompatibility, the scp(1) client may be instructed to use
the legacy scp/rcp using the -O flag."

cf.
  ~/.ssh/config
  Host old-host
        HostkeyAlgorithms +ssh-rsa
        PubkeyAcceptedAlgorithms +ssh-rsa

- SD/MMC Configration
  Switch Default uSD/eMMC Routing: Arasan SDHCI -> EMMC2
  http://mail-index.netbsd.org/port-arm/2021/08/08/msg007393.html
  the Arasan SDHCI is used to connect bwfm(4). 

In this image, a synbolic link added

/libdata/firmware/if_bwfm:
ln -s brcmfmac43455-sdio.raspberrypi,4-model-b.txt "brcmfmac43455-sdio.Raspberry Pi 4 Model B.txt"
to avoid
bwfm0: autoconfiguration error: NVRAM file not available
 
- only for RPI4 
  (fill dtb for RPI3?)
- build script
 https://github.com/ebijun/NetBSD/tree/master/RPI/RPIimage/Image/aarch64
- [Issue] Can't recognize DOS partition from Windows
  Should I Use MBR version image?
- rpi cm4 + waveshare mini base board B seems stop after kernel load
  http://mail-index.netbsd.org/port-arm/2021/06/30/msg007343.html
- pkgin support
  edit /usr/pkg/etc/pkgin/repositories.conf
  cf.
  http://cdn.netbsd.org/pub/NetBSD/misc/jun/raspberry-pi/aarch64/2022
  and pkgin update

sysinfo:
 g++-10.4.0 gcc-10.4.0 netpgp-3.99.18 sh-20220122-20220826220120Z
 tzdata-2022c

pkgsrc:
 curl-7.84.0nb2 fltk-1.3.8nb1 fossil-2.19 gd-2.3.3nb4 git-base-2.37.2
 glib2-2.72.3 gnutls-3.7.7 gtk3+-3.24.34nb2 harfbuzz-5.1.0
 libepoll-shim-0.0.20210418nb2 libwebp-1.2.4 lintpkgsrc-2022.08.13
 lz4-1.9.4 mlterm-3.9.2nb5 nettle-3.8.1 nghttp2-1.49.0
 p5-IO-Socket-SSL-2.074 p5-Net-DNS-1.34 p5-Net-SSLeay-1.92
 py310-cElementTree-3.10.6 py310-expat-3.10.6 python310-3.10.6
 qt5-qtbase-5.15.5nb2 ruby27-cairo-1.17.7 ruby27-gdk3-3.5.1nb1
 ruby27-gtk3-3.5.1nb1 ruby27-mikutter-5.0.4nb1 ruby27-nokogiri-1.13.8
 ruby27-pkg-config-1.4.9 uim-1.8.9pre20210104nb4 wayland-1.21.0
 wayland-protocols-1.26nb1

RPI4 status:
- boot via UEFI_VER=v1.33
 https://github.com/pftf/RPi4/releases

In this image,pre-setted RPI_EFI.fd
 Advanced Configration
 -> Limit RAM to 3GB	Disabled

- HDMI: works
- audio: vcaudio
  http://mail-index.netbsd.org/source-changes-d/2021/01/22/msg013133.html
- USB device: works
- bwfm0 Wireless network:?
  (works well on RPI3,not works on RPI4?)
- Pi 4 Bootloader Configuration
  https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2711_bootloader_config.md

Update:
- NetBSD-current 9.99.99 evbarm-aarch64 202208270430Z arm64.img from nyftp.
- pkginfo
 https://github.com/ebijun/NetBSD/blob/master/RPI/RPIimage/Image/aarch64/pkginfo
- sysinfo
 https://github.com/ebijun/NetBSD/blob/master/RPI/RPIimage/Image/aarch64/sysinfo

Update from 20221-06:
https://github.com/ebijun/NetBSD/commit/1b3ef330ecf023aa73d58ccb8b4029c520f33cdf

- mate/firefox/inkscape/libreoffice works well
   pkg_add mate
   pkg_add gvfs
   pkg_add firefox
   pkg_add firefox-l10n
   pkg_add libreoffice
   pkg_add inkscape
   pkg_add gimp
   pkg_add scribus
   pkg_add py38-sphinx
   pkg_add wxGTK30
   pkg_add gnome-keyring

- Sphinx with latexpdf
  https://github.com/ebijun/NetBSD/blob/master/Guide/latexpdf.rst 

- pkgin: upgrade failed
- raspberry-pi userland: compile failed 

Pre-installed packages:
  bash
  tcsh
  vlgothic-ttf
  icewm
  xli
  ruby27-mikutter
  uim
  fossil
  sudo
  git-base
  zsh
  mlterm
  pkg_chk
  lintpkgsrc
  mozilla-rootcerts
  dillo
  medit
  lrzsz

- pre-build packages:
  See /etc/pkg_install.conf
  PKG_PATH=http://cdn.netbsd.org/pub/NetBSD/misc/jun/raspberry-pi/aarch64/2022/

pkgsrc: 
  # cd /usr
  # ftp http://cdn.netbsd.org/pub/pkgsrc/current/pkgsrc.tar.gz
  # ls /usr/pkgsrc                ... check if exists.
  # tar tzvf pkgsrc.tar.gz |head  ... check the archive
  # tar xzvf pkgsrc.tar.gz        ... extract
  # ls /usr/pkgsrc                ... check what extracted
  # pkg_chk -g                    ... List to/usr/pkgsrc/pkgchk.conf
  # (cd /usr/pkgsrc;cvs update -PAd) ... update
  # pkg_chk -un                   ... Update (listup)
  # pkg_chk -u                    ... Update

EEPROM verson:
 Check&update with Raspberry Pi OS (pi:raspberry)
 pi@raspberrypi:~ $ cat /etc/default/rpi-eeprom-update 
 FIRMWARE_RELEASE_STATUS="stable"
 pi@raspberrypi:~ $ sudo rpi-eeprom-update
 BCM2711 detected
 Dedicated VL805 EEPROM detected
 BOOTLOADER: up-to-date
 CURRENT: Thu 16 Jul 15:15:46 UTC 2020 (1594912546)
 LATEST: Thu 16 Jul 15:15:46 UTC 2020 (1594912546)
 FW DIR: /lib/firmware/raspberrypi/bootloader/stable
 VL805: up-to-date
 CURRENT: 000138a1
 LATEST: 000138a1

--
Jun Ebihara