Port-arm archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: 2019-10-03-netbsd-raspi-aarch64.img



> Am 04.10.2019 um 01:36 schrieb Jun Ebihara <jun%soum.co.jp@localhost>:
> 
> I've updated 2019-10-03-netbsd-raspi-aarch64.img.gz for RPI3/3B/4.
> 
> http://cdn.netbsd.org/pub/NetBSD/misc/jun/raspberry-pi/2019-10-03-aarch64/2019-10-03-netbsd-raspi-aarch64.img.gz
> http://cdn.netbsd.org/pub/NetBSD/misc/jun/raspberry-pi/2019-10-03-aarch64/MD5
> 
thank you !

> bwfm*   at sdmmc?
[   2.4247354] bwfm0 at sdmmc0 function 1
[   2.4347359] (manufacturer 0x2d0, product 0xa9a6) at sdmmc0 function 2 not configured
[   2.4447361] (manufacturer 0x2d0, product 0xa9a6, standard function interface code 0x2) at sdmmc0 function d
…doesn`t work ( can't scan list, no success on wpa_supplicant)

> Automatic resize partition: see /etc/rc.conf and /etc/fstab
had to change ld0 -> ld1 in /etc/rc.conf , then resize worked

> - kernel and /boot
reboot still hangs, only coldboot

Regards
Klaus
-------------de# dmesg
^H^D^B[   1.0000000] ------------------------------------------
[     1.000000] kern_vtopdiff         = 0xffffffbfffe00000
[     1.000000] physical_start        = 0x0000000000001000
[     1.000000] kernel_start_phys     = 0x0000000000200000
[     1.000000] kernel_end_phys       = 0x0000000000fac000
[     1.000000] msgbuf                = 0x000000003bff0000
[     1.000000] physical_end          = 0x00000000fc000000
[     1.000000] VM_MIN_KERNEL_ADDRESS = 0xffffffc000000000
[     1.000000] kernel_start_l2       = 0xffffffc000000000
[     1.000000] kernel_start          = 0xffffffc000000000
[     1.000000] kernel_end            = 0xffffffc000dac000
[     1.000000] pagetables            = 0xffffffc000dac000
[     1.000000] pagetables_end        = 0xffffffc000dbb000
[     1.000000] kernel_end_l2         = 0xffffffc000e00000
[     1.000000] module_start          = 0xffffffc000e00000
[     1.000000] module_end            = 0xffffffc002e00000
[     1.000000] (kernel va area)
[     1.000000] (devmap va area)      = 0xfffffffff0000000
[     1.000000] VM_MAX_KERNEL_ADDRESS = 0xffffffffffe00000
[     1.000000] ------------------------------------------
[     1.000000] mpstart
[     1.000000] pool redzone disabled for 'kmem-4096'
[     1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[     1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[     1.000000] 2018, 2019 The NetBSD Foundation, Inc.  All rights reserved.
[     1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[     1.000000] The Regents of the University of California.  All rights reserved.

[     1.000000] NetBSD 9.99.13 (RPI4TEST64) #0: Thu Sep 26 11:24:00 UTC 2019
[     1.000000]         mlelstv@slowpoke:/home/netbsd-current/obj.evbarm64-el/scratch/netbsd-current/src/sys/4
[     1.000000] total memory = 3954 MB
[     1.000000] avail memory = 3812 MB
[     1.000000] pool redzone disabled for 'buf4k'
[     1.000000] pool redzone disabled for 'buf64k'
[     1.000000] timecounter: Timecounters tick every 10.000 msec
[     1.000000] armfdt0 (root)
[     1.000000] simplebus0 at armfdt0: Raspberry Pi 4 Model B Rev 1.1
[     1.000000] simplebus1 at simplebus0
[     1.000000] simplebus2 at simplebus0
[     1.000000] simplebus3 at simplebus1
[     1.000000] simplebus4 at simplebus0
[     1.000000] cpus0 at simplebus0
[     1.000000] simplebus5 at simplebus0
[     1.000000] simplebus6 at simplebus0
[     1.000000] cpu0 at cpus0: Cortex-A72 r0p3 (Cortex V8-A core)
[     1.000000] cpu0: package 0, core 0, smt 0
[     1.000000] cpu0: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
[     1.000000] cpu0: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
[     1.000000] cpu0: Dcache line 64, Icache line 64
[     1.000000] cpu0: L1 48KB/64B 3-way read-allocate PIPT Instruction cache
[     1.000000] cpu0: L1 32KB/64B 2-way write-back read-allocate write-allocate PIPT Data cache
[     1.000000] cpu0: L2 1024KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache
[     1.000000] cpu0: revID=0x0, PMCv3, 4k table, 64k table, 16bit ASID
[     1.000000] cpu0: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fusd
[     1.000000] cpu0: A72 errata #859971 present, workaround NOT enabled (U-Boot update needed)
[     1.000000] cpu1 at cpus0: Cortex-A72 r0p3 (Cortex V8-A core)
[     1.000000] cpu1: package 0, core 1, smt 0
[     1.000000] cpu2 at cpus0: Cortex-A72 r0p3 (Cortex V8-A core)
[     1.000000] cpu2: package 0, core 2, smt 0
[     1.000000] cpu3 at cpus0: Cortex-A72 r0p3 (Cortex V8-A core)
[     1.000000] cpu3: package 0, core 3, smt 0
[     1.000000] gic0 at simplebus1: GIC
[     1.000000] armgic0 at gic0: Generic Interrupt Controller, 256 sources (247 valid)
[     1.000000] armgic0: 16 Priorities, 224 SPIs, 7 PPIs, 16 SGIs
[     1.000000] bcmcprman0 at simplebus1: BCM283x Clock Controller
[     1.000000] fclock0 at simplebus2: 54000000 Hz fixed clock (osc)
[     1.000000] bcmaux0 at simplebus1
[     1.000000] fclock1 at simplebus2: 480000000 Hz fixed clock (otg)
[     1.000000] bcmicu0 at simplebus1: Multiprocessor
[     1.000000] gtmr0 at simplebus0: Generic Timer
[     1.000000] gtmr0: interrupting on GIC irq 27
[     1.000000] armgtmr0 at gtmr0: Generic Timer (54000 kHz, virtual)
[     1.000000] timecounter: Timecounter "armgtmr0" frequency 54000000 Hz quality 500
[     1.000003] gregulator0 at simplebus0: vdd-sd-io
[     1.000003] gregulator0: autoconfiguration error: cannot get pin 0
[     1.000003] plcom0 at simplebus1: ARM PL011 UART
[     1.000003] plcom0: txfifo disabled
[     1.000003] plcom0: interrupting on GIC irq 153
[     1.000003] com0 at simplebus1: BCM AUX UART, working fifo
[     1.000003] com0: console
[     1.000003] com0: interrupting on GIC irq 125
[     1.000003] fregulator0 at simplebus0: 5v0
[     1.000003] fregulator1 at simplebus0: 3v3
[     1.000003] /soc/thermal@7d5d2200 at simplebus1 not configured
[     1.000003] /soc/dsi@7e209000 at simplebus1 not configured
[     1.000003] bcmgpio0 at simplebus1: GPIO controller
[     1.000003] bcmgpio0: pins 0..31 interrupting on GIC irq 145
[     1.000003] bcmgpio0: pins 32..54 interrupting on GIC irq 146
[     1.000003] gpio0 at bcmgpio0: 54 pins
[     1.000003] bcmdmac0 at simplebus1: DMA0 DMA2 DMA4 DMA5 DMA6 DMA7 DMA8 DMA12 DMA13 DMA14
[     1.000003] /soc/power at simplebus1 not configured
[     1.000003] /phy at simplebus0 not configured
[     1.000003] bcmmbox0 at simplebus1: VC mailbox
[     1.000003] bcmmbox0: interrupting on GIC irq 65
[     1.000003] vcmbox0 at bcmmbox0
[     1.000003] bcmpmwdog0 at simplebus1: Power management, Reset and Watchdog controller
[     1.000003] /scb/pcie@7d500000 at simplebus4 not configured
[     1.000003] /scb/genet@7d580000 at simplebus4 not configured
[     1.000003] bcm2838rng0 at simplebus1: Hardware RNG
[     1.000003] sdhc0 at simplebus1: SDHC controller
[     1.000003] sdhc0: interrupting on GIC irq 158
[     1.000003] autoconfiguration error: : failed to decode interrupt
[     1.000003] gpioleds0 at simplebus0: led0
[     1.000003] /soc/firmware/gpio at simplebus3 not configured
[     1.000003] dwctwo0 at simplebus1: USB controller
[     1.000003] dwctwo0: interrupting on GIC irq 105
[     1.000003] sdhc1 at simplebus1: SDHC controller
[     1.000003] sdhc1: interrupting on GIC irq 158
[     1.000003] genfb0 at simplebus1rpi_fb_init: addr = 0xfe876000 size = 3686400
[     1.000003] rpi_fb_init: depth = 32
[     1.000003] rpi_fb_init: pitch = 5120
[     1.000003] rpi_fb_init: width = 1280 height = 720
[     1.000003] rpi_fb_init: vwidth = 1280 vheight = 720
[     1.000003] : switching to framebuffer console
[     1.000003] genfb0: framebuffer at 0xfe876000, size 1280x720, depth 32, stride 5120
[     1.000003] wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
[     1.000003] wsmux1: connecting to wsdisplay0
[     1.000003] wsdisplay0: screen 1-3 added (default, vt100 emulation)
[     1.000003] /soc/vcsm at simplebus1 not configured
[     1.000003] /soc/virtgpio at simplebus1 not configured
[     1.000003] bcmdmac1 at simplebus4: DMA12 DMA13 DMA14
[     1.000003] /scb/mailbox@7e00b840 at simplebus4 not configured
[     1.000003] armpmu0 at simplebus0: Performance Monitor Unit
[     1.000003] /soc/gpiomem at simplebus1 not configured
[     1.000003] /scb/hevc-decoder@7eb00000 at simplebus4 not configured
[     1.000003] /scb/argon-local-intc@7eb10000 at simplebus4 not configured
[     1.000003] /scb/h264-decoder@7eb20000 at simplebus4 not configured
[     1.000003] /scb/vp9-decoder@7eb30000 at simplebus4 not configured
[     1.000003] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[     1.000003] cpu_boot_secondary_processors: writing mbox with 0xe
[     1.439575] cpu1: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
[     1.455519] cpu1: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
[     1.475519] cpu1: Dcache line 64, Icache line 64
[     1.485519] cpu1: L1 48KB/64B 3-way read-allocate PIPT Instruction cache
[     1.495519] cpu1: L1 32KB/64B 2-way write-back read-allocate write-allocate PIPT Data cache
[     1.515520] cpu1: L2 1024KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache
[     1.545520] cpu1: revID=0x0, PMCv3, 4k table, 64k table, 16bit ASID
[     1.555521] cpu1: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fusd
[     1.585521] cpu1: A72 errata #859971 present, workaround NOT enabled (U-Boot update needed)
[     1.605521] cpu2: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
[     1.625522] cpu2: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
[     1.635522] cpu2: Dcache line 64, Icache line 64
[     1.655524] cpu2: L1 48KB/64B 3-way read-allocate PIPT Instruction cache
[     1.665523] cpu2: L1 32KB/64B 2-way write-back read-allocate write-allocate PIPT Data cache
[     1.685523] cpu2: L2 1024KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache
[     1.705524] cpu2: revID=0x0, PMCv3, 4k table, 64k table, 16bit ASID
[     1.725524] cpu2: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fusd
[     1.755525] cpu2: A72 errata #859971 present, workaround NOT enabled (U-Boot update needed)
[     1.775526] cpu3: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
[     1.795527] cpu3: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
[     1.815527] cpu3: Dcache line 64, Icache line 64
[     1.825527] cpu3: L1 48KB/64B 3-way read-allocate PIPT Instruction cache
[     1.835527] cpu3: L1 32KB/64B 2-way write-back read-allocate write-allocate PIPT Data cache
[     1.855528] cpu3: L2 1024KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache
[     1.885528] cpu3: revID=0x0, PMCv3, 4k table, 64k table, 16bit ASID
[     1.895529] cpu3: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fusd
[     1.925529] cpu3: A72 errata #859971 present, workaround NOT enabled (U-Boot update needed)
[     1.945530] cpu_boot_secondary_processors: secondary processors hatched
[     1.964723] sdhc0: SDHC 3.0, rev 153, PIO, 200000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks
[     1.964723] sdmmc0 at sdhc0 slot 0
[     1.975926] dwctwo0: Core Release: 2.80a (snpsid=4f54280a)
[     1.975926] usb0 at dwctwo0: USB revision 2.0
[     1.984724] sdhc0: update power 7
[     1.984724] delay(100000) chip=54000000, param=54000000
[     2.094727] sdhc1: SDHC 3.0, rev 16, PIO, 100000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks
[     2.114727] sdmmc1 at sdhc1 slot 0
[     2.114727] sdhc0: cmd timeout error (cmd=341a)
[     2.134728] sdmmc0: autoconfiguration error: direct I/O error 60, r=6 p=0xffffffc0619f4e3c w=1
[     2.144728] sdhc1: update power 7
[     2.154728] delay(100000) chip=54000000, param=54000000
[     2.254731] uhub0 at usb0: NetBSD (0000) DWC2 root hub (0000), class 9/0, rev 2.00/1.00, addr 1
[     2.264731] uhub0: 1 port with 1 removable, self powered
[     2.264731] sdhc1: cmd timeout error (cmd=341a)
[     2.274731] sdmmc1: autoconfiguration error: direct I/O error 60, r=6 p=0xffffffc061a0ee3c w=1
[     2.294732] armpmu0: interrupting on GIC irq 48
[     2.304732] armpmu0: interrupting on GIC irq 49
[     2.304732] armpmu0: interrupting on GIC irq 50
[     2.314732] armpmu0: interrupting on GIC irq 51
[     2.344735] IPsec: Initialized Security Association Processing.
[     2.354734] sdmmc1: SD card status: 4-bit, C10, U3, V30, A1
[     2.364734] ld1 at sdmmc1: <0x03:0x5344:SM32G:0x80:0x6c99163c:0x134>
[     2.364734] ld1: 30436 MB, 7729 cyl, 128 head, 63 sec, 512 bytes/sect x 62333952 sectors
[     2.384735] ld1: 4-bit width, High-Speed/SDR25, 50.000 MHz
[     2.424735] sdmmc0: SDIO function
[     2.424735] bwfm0 at sdmmc0 function 1
[     2.434736] (manufacturer 0x2d0, product 0xa9a6) at sdmmc0 function 2 not configured
[     2.444736] (manufacturer 0x2d0, product 0xa9a6, standard function interface code 0x2) at sdmmc0 functiond
[     2.984746] WARNING: 4 errors while detecting hardware; check system log.
[     2.984746] boot device: ld1
[     2.994747] root on ld1a dumps on ld1b
[     3.004747] root file system type: ffs
[     3.004747] kern.module.path=/stand/evbarm/9.99.13/modules
[     3.017885] WARNING: no TOD clock present
[     3.017885] WARNING: using filesystem time
[     3.026066] WARNING: CHECK AND RESET THE DATE![   1.0000000] ------------------------------------------
[     1.000000] kern_vtopdiff         = 0xffffffbfffe00000
[     1.000000] physical_start        = 0x0000000000001000
[     1.000000] kernel_start_phys     = 0x0000000000200000
[     1.000000] kernel_end_phys       = 0x0000000000fac000
[     1.000000] msgbuf                = 0x000000003bff0000
[     1.000000] physical_end          = 0x00000000fc000000
[     1.000000] VM_MIN_KERNEL_ADDRESS = 0xffffffc000000000
[     1.000000] kernel_start_l2       = 0xffffffc000000000
[     1.000000] kernel_start          = 0xffffffc000000000
[     1.000000] kernel_end            = 0xffffffc000dac000
[     1.000000] pagetables            = 0xffffffc000dac000
[     1.000000] pagetables_end        = 0xffffffc000dbb000
[     1.000000] kernel_end_l2         = 0xffffffc000e00000
[     1.000000] module_start          = 0xffffffc000e00000
[     1.000000] module_end            = 0xffffffc002e00000
[     1.000000] (kernel va area)
[     1.000000] (devmap va area)      = 0xfffffffff0000000
[     1.000000] VM_MAX_KERNEL_ADDRESS = 0xffffffffffe00000
[     1.000000] ------------------------------------------
[     1.000000] mpstart
[     1.000000] pool redzone disabled for 'kmem-4096'
[     1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[     1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[     1.000000] 2018, 2019 The NetBSD Foundation, Inc.  All rights reserved.
[     1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[     1.000000] The Regents of the University of California.  All rights reserved.

[     1.000000] NetBSD 9.99.13 (RPI4TEST64) #0: Thu Sep 26 11:24:00 UTC 2019
[     1.000000]         mlelstv@slowpoke:/home/netbsd-current/obj.evbarm64-el/scratch/netbsd-current/src/sys/4
[     1.000000] total memory = 3954 MB
[     1.000000] avail memory = 3812 MB
[     1.000000] pool redzone disabled for 'buf4k'
[     1.000000] pool redzone disabled for 'buf64k'
[     1.000000] timecounter: Timecounters tick every 10.000 msec
[     1.000000] armfdt0 (root)
[     1.000000] simplebus0 at armfdt0: Raspberry Pi 4 Model B Rev 1.1
[     1.000000] simplebus1 at simplebus0
[     1.000000] simplebus2 at simplebus0
[     1.000000] simplebus3 at simplebus1
[     1.000000] simplebus4 at simplebus0
[     1.000000] cpus0 at simplebus0
[     1.000000] simplebus5 at simplebus0
[     1.000000] simplebus6 at simplebus0
[     1.000000] cpu0 at cpus0: Cortex-A72 r0p3 (Cortex V8-A core)
[     1.000000] cpu0: package 0, core 0, smt 0
[     1.000000] cpu0: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
[     1.000000] cpu0: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
[     1.000000] cpu0: Dcache line 64, Icache line 64
[     1.000000] cpu0: L1 48KB/64B 3-way read-allocate PIPT Instruction cache
[     1.000000] cpu0: L1 32KB/64B 2-way write-back read-allocate write-allocate PIPT Data cache
[     1.000000] cpu0: L2 1024KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache
[     1.000000] cpu0: revID=0x0, PMCv3, 4k table, 64k table, 16bit ASID
[     1.000000] cpu0: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fusd
[     1.000000] cpu0: A72 errata #859971 present, workaround NOT enabled (U-Boot update needed)
[     1.000000] cpu1 at cpus0: Cortex-A72 r0p3 (Cortex V8-A core)
[     1.000000] cpu1: package 0, core 1, smt 0
[     1.000000] cpu2 at cpus0: Cortex-A72 r0p3 (Cortex V8-A core)
[     1.000000] cpu2: package 0, core 2, smt 0
[     1.000000] cpu3 at cpus0: Cortex-A72 r0p3 (Cortex V8-A core)
[     1.000000] cpu3: package 0, core 3, smt 0
[     1.000000] gic0 at simplebus1: GIC
[     1.000000] armgic0 at gic0: Generic Interrupt Controller, 256 sources (247 valid)
[     1.000000] armgic0: 16 Priorities, 224 SPIs, 7 PPIs, 16 SGIs
[     1.000000] bcmcprman0 at simplebus1: BCM283x Clock Controller
[     1.000000] fclock0 at simplebus2: 54000000 Hz fixed clock (osc)
[     1.000000] bcmaux0 at simplebus1
[     1.000000] fclock1 at simplebus2: 480000000 Hz fixed clock (otg)
[     1.000000] bcmicu0 at simplebus1: Multiprocessor
[     1.000000] gtmr0 at simplebus0: Generic Timer
[     1.000000] gtmr0: interrupting on GIC irq 27
[     1.000000] armgtmr0 at gtmr0: Generic Timer (54000 kHz, virtual)
[     1.000000] timecounter: Timecounter "armgtmr0" frequency 54000000 Hz quality 500
[     1.000003] gregulator0 at simplebus0: vdd-sd-io
[     1.000003] gregulator0: autoconfiguration error: cannot get pin 0
[     1.000003] plcom0 at simplebus1: ARM PL011 UART
[     1.000003] plcom0: txfifo disabled
[     1.000003] plcom0: interrupting on GIC irq 153
[     1.000003] com0 at simplebus1: BCM AUX UART, working fifo
[     1.000003] com0: console
[     1.000003] com0: interrupting on GIC irq 125
[     1.000003] fregulator0 at simplebus0: 5v0
[     1.000003] fregulator1 at simplebus0: 3v3
[     1.000003] /soc/thermal@7d5d2200 at simplebus1 not configured
[     1.000003] /soc/dsi@7e209000 at simplebus1 not configured
[     1.000003] bcmgpio0 at simplebus1: GPIO controller
[     1.000003] bcmgpio0: pins 0..31 interrupting on GIC irq 145
[     1.000003] bcmgpio0: pins 32..54 interrupting on GIC irq 146
[     1.000003] gpio0 at bcmgpio0: 54 pins
[     1.000003] bcmdmac0 at simplebus1: DMA0 DMA2 DMA4 DMA5 DMA6 DMA7 DMA8 DMA12 DMA13 DMA14
[     1.000003] /soc/power at simplebus1 not configured
[     1.000003] /phy at simplebus0 not configured
[     1.000003] bcmmbox0 at simplebus1: VC mailbox
[     1.000003] bcmmbox0: interrupting on GIC irq 65
[     1.000003] vcmbox0 at bcmmbox0
[     1.000003] bcmpmwdog0 at simplebus1: Power management, Reset and Watchdog controller
[     1.000003] /scb/pcie@7d500000 at simplebus4 not configured
[     1.000003] /scb/genet@7d580000 at simplebus4 not configured
[     1.000003] bcm2838rng0 at simplebus1: Hardware RNG
[     1.000003] sdhc0 at simplebus1: SDHC controller
[     1.000003] sdhc0: interrupting on GIC irq 158
[     1.000003] autoconfiguration error: : failed to decode interrupt
[     1.000003] gpioleds0 at simplebus0: led0
[     1.000003] /soc/firmware/gpio at simplebus3 not configured
[     1.000003] dwctwo0 at simplebus1: USB controller
[     1.000003] dwctwo0: interrupting on GIC irq 105
[     1.000003] sdhc1 at simplebus1: SDHC controller
[     1.000003] sdhc1: interrupting on GIC irq 158
[     1.000003] genfb0 at simplebus1rpi_fb_init: addr = 0xfe876000 size = 3686400
[     1.000003] rpi_fb_init: depth = 32
[     1.000003] rpi_fb_init: pitch = 5120
[     1.000003] rpi_fb_init: width = 1280 height = 720
[     1.000003] rpi_fb_init: vwidth = 1280 vheight = 720
[     1.000003] : switching to framebuffer console
[     1.000003] genfb0: framebuffer at 0xfe876000, size 1280x720, depth 32, stride 5120
[     1.000003] wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
[     1.000003] wsmux1: connecting to wsdisplay0
[     1.000003] wsdisplay0: screen 1-3 added (default, vt100 emulation)
[     1.000003] /soc/vcsm at simplebus1 not configured
[     1.000003] /soc/virtgpio at simplebus1 not configured
[     1.000003] bcmdmac1 at simplebus4: DMA12 DMA13 DMA14
[     1.000003] /scb/mailbox@7e00b840 at simplebus4 not configured
[     1.000003] armpmu0 at simplebus0: Performance Monitor Unit
[     1.000003] /soc/gpiomem at simplebus1 not configured
[     1.000003] /scb/hevc-decoder@7eb00000 at simplebus4 not configured
[     1.000003] /scb/argon-local-intc@7eb10000 at simplebus4 not configured
[     1.000003] /scb/h264-decoder@7eb20000 at simplebus4 not configured
[     1.000003] /scb/vp9-decoder@7eb30000 at simplebus4 not configured
[     1.000003] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[     1.000003] cpu_boot_secondary_processors: writing mbox with 0xe
[     1.444474] cpu2: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
[     1.460415] cpu2: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
[     1.480415] cpu2: Dcache line 64, Icache line 64
[     1.490415] cpu2: L1 48KB/64B 3-way read-allocate PIPT Instruction cache
[     1.500416] cpu2: L1 32KB/64B 2-way write-back read-allocate write-allocate PIPT Data cache
[     1.520416] cpu2: L2 1024KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache
[     1.540416] cpu2: revID=0x0, PMCv3, 4k table, 64k table, 16bit ASID
[     1.560417] cpu2: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fusd
[     1.590417] cpu2: A72 errata #859971 present, workaround NOT enabled (U-Boot update needed)
[     1.610418] cpu3: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
[     1.630418] cpu3: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
[     1.640419] cpu3: Dcache line 64, Icache line 64
[     1.660419] cpu3: L1 48KB/64B 3-way read-allocate PIPT Instruction cache
[     1.670419] cpu3: L1 32KB/64B 2-way write-back read-allocate write-allocate PIPT Data cache
[     1.690420] cpu3: L2 1024KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache
[     1.710420] cpu3: revID=0x0, PMCv3, 4k table, 64k table, 16bit ASID
[     1.730421] cpu3: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fusd
[     1.760424] cpu3: A72 errata #859971 present, workaround NOT enabled (U-Boot update needed)
[     1.780422] cpu1: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
[     1.800423] cpu1: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
[     1.820423] cpu1: Dcache line 64, Icache line 64
[     1.830423] cpu1: L1 48KB/64B 3-way read-allocate PIPT Instruction cache
[     1.840424] cpu1: L1 32KB/64B 2-way write-back read-allocate write-allocate PIPT Data cache
[     1.860424] cpu1: L2 1024KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache
[     1.890425] cpu1: revID=0x0, PMCv3, 4k table, 64k table, 16bit ASID
[     1.900425] cpu1: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fusd
[     1.930426] cpu1: A72 errata #859971 present, workaround NOT enabled (U-Boot update needed)
[     1.950426] cpu_boot_secondary_processors: secondary processors hatched
[     1.969487] sdhc0: SDHC 3.0, rev 153, PIO, 200000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks
[     1.969487] sdmmc0 at sdhc0 slot 0
[     1.980686] dwctwo0: Core Release: 2.80a (snpsid=4f54280a)
[     1.980686] usb0 at dwctwo0: USB revision 2.0
[     1.989490] sdhc0: update power 7
[     1.989490] delay(100000) chip=54000000, param=54000000
[     2.099491] sdhc1: SDHC 3.0, rev 16, PIO, 100000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks
[     2.119492] sdmmc1 at sdhc1 slot 0
[     2.119492] sdhc0: cmd timeout error (cmd=341a)
[     2.139492] sdmmc0: autoconfiguration error: direct I/O error 60, r=6 p=0xffffffc0619f4e3c w=1
[     2.149493] sdhc1: update power 7
[     2.159493] delay(100000) chip=54000000, param=54000000
[     2.259495] uhub0 at usb0: NetBSD (0000) DWC2 root hub (0000), class 9/0, rev 2.00/1.00, addr 1
[     2.269495] uhub0: 1 port with 1 removable, self powered
[     2.269495] sdhc1: cmd timeout error (cmd=341a)
[     2.279496] sdmmc1: autoconfiguration error: direct I/O error 60, r=6 p=0xffffffc061a0ee3c w=1
[     2.299496] armpmu0: interrupting on GIC irq 48
[     2.309497] armpmu0: interrupting on GIC irq 49
[     2.309497] armpmu0: interrupting on GIC irq 50
[     2.319497] armpmu0: interrupting on GIC irq 51
[     2.349499] IPsec: Initialized Security Association Processing.
[     2.359499] sdmmc1: SD card status: 4-bit, C10, U3, V30, A1
[     2.369498] ld1 at sdmmc1: <0x03:0x5344:SM32G:0x80:0x6c99163c:0x134>
[     2.369498] ld1: 30436 MB, 7729 cyl, 128 head, 63 sec, 512 bytes/sect x 62333952 sectors
[     2.389499] ld1: 4-bit width, High-Speed/SDR25, 50.000 MHz
[     2.429500] sdmmc0: SDIO function
[     2.439500] bwfm0 at sdmmc0 function 1
[     2.439500] (manufacturer 0x2d0, product 0xa9a6) at sdmmc0 function 2 not configured
[     2.449500] (manufacturer 0x2d0, product 0xa9a6, standard function interface code 0x2) at sdmmc0 functiond
[     2.989510] WARNING: 4 errors while detecting hardware; check system log.
[     2.989510] boot device: ld1
[     2.999511] root on ld1a dumps on ld1b
[     3.009510] root file system type: ffs
[     3.009510] kern.module.path=/stand/evbarm/9.99.13/modules
[     3.022702] WARNING: no TOD clock present
[     3.022702] WARNING: using filesystem time
[     3.030883] WARNING: CHECK AND RESET THE DATE!
[     4.349540] sdhc0: started command 353a while last command 341a not complete
[     4.359540] bwfm0: wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
[     4.359540] bwfm0: address dc:a6:32:21:e9:58
[     4.369540] bwfm0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[     4.379541] bwfm0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[     4.379541] bwfm0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 5s
[     8.719748] wsdisplay0: screen 4 added (default, vt100 emulation)


Home | Main Index | Thread Index | Old Index