RPi 4B+ ?

To: NetBSD ARM Port Mailing List <port-arm%netbsd.org@localhost>

Subject: RPi 4B+ ?

From: Michael Cheponis <michael.cheponis%gmail.com@localhost>

Date: Wed, 17 Jul 2019 23:39:29 -0700

Is there something I need to do to get evbarm to run on RPI 4B+ ? Ebihara-san's latest http://cdn.netbsd.org/pub/NetBSD/misc/jun/raspberry-pi/2019-07-13-earmv6hf/2019-07-13-netbsd-raspi-earmv6hf.img.gz from 10 days ago has a brief flash of the lights, but nothing comes on the console (yes, disabled fb).

Attached is the dmesg from raspbian, I'm not sure if it's helpful.

Thanks,

Mike

[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.57-v7l+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1244 SMP Thu Jul 4 18:48:07 BST 2019 [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 256 MiB at 0x000000001ec00000 [ 0.000000] On node 0 totalpages: 1012736 [ 0.000000] DMA zone: 1728 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 816128 pages, LIFO batch:63 [ 0.000000] random: get_random_bytes called from start_kernel+0xc0/0x4e8 with crng_init=0 [ 0.000000] percpu: Embedded 17 pages/cpu s39488 r8192 d21952 u69632 [ 0.000000] pcpu-alloc: s39488 r8192 d21952 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1011008 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M smsc95xx.macaddr=DC:A6:32:08:45:76 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=d20c85a3-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 3735596K/4050944K available (8192K kernel code, 658K rwdata, 2340K rodata, 2048K init, 850K bss, 53204K reserved, 262144K cma-reserved, 3264512K highmem) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0x(ptrval) - 0x(ptrval) (10208 kB) .init : 0x(ptrval) - 0x(ptrval) (2048 kB) .data : 0x(ptrval) - 0x(ptrval) ( 659 kB) .bss : 0x(ptrval) - 0x(ptrval) ( 851 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 27981 entries in 83 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000005] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000017] Switching to timer-based delay loop, resolution 18ns [ 0.000236] Console: colour dummy device 80x30 [ 0.000259] console [tty1] enabled [ 0.000302] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) [ 0.000323] pid_max: default: 32768 minimum: 301 [ 0.000584] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000601] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001342] CPU: Testing write buffer coherency: ok [ 0.001736] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002352] Setting up static identity map for 0x200000 - 0x20003c [ 0.002506] rcu: Hierarchical SRCU implementation. [ 0.003344] smp: Bringing up secondary CPUs ... [ 0.004198] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.005176] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.006118] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.006248] smp: Brought up 1 node, 4 CPUs [ 0.006261] SMP: Total of 4 processors activated (432.00 BogoMIPS). [ 0.006270] CPU: All CPU(s) started in HYP mode. [ 0.006278] CPU: Virtualization extensions available. [ 0.007047] devtmpfs: initialized [ 0.017197] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [ 0.017408] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.017428] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.024696] pinctrl core: initialized pinctrl subsystem [ 0.025509] NET: Registered protocol family 16 [ 0.028240] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.029658] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.029668] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.029859] Serial: AMBA PL011 UART driver [ 0.032908] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.068774] bcm2835-dma fe007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1 [ 0.071236] vgaarb: loaded [ 0.071597] SCSI subsystem initialized [ 0.071790] usbcore: registered new interface driver usbfs [ 0.071839] usbcore: registered new interface driver hub [ 0.071936] usbcore: registered new device driver usb [ 0.090587] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-07-09 14:37, variant start [ 0.100335] raspberrypi-firmware soc:firmware: Firmware hash is d2b1b7fb01475cb3914b2086299e32d724e832f1 [ 0.111802] clocksource: Switched to clocksource arch_sys_counter [ 0.188394] VFS: Disk quotas dquot_6.6.0 [ 0.188466] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.188609] FS-Cache: Loaded [ 0.188778] CacheFiles: Loaded [ 0.189273] simple-framebuffer: probe of 0.framebuffer failed with error -12 [ 0.198275] NET: Registered protocol family 2 [ 0.198918] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.198942] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.199007] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.199077] TCP: Hash tables configured (established 8192 bind 8192) [ 0.199188] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.199214] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.199498] NET: Registered protocol family 1 [ 0.200012] RPC: Registered named UNIX socket transport module. [ 0.200021] RPC: Registered udp transport module. [ 0.200030] RPC: Registered tcp transport module. [ 0.200039] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.200054] PCI: CLS 0 bytes, default 64 [ 0.203116] Initialise system trusted keyrings [ 0.203274] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [ 0.212055] FS-Cache: Netfs 'nfs' registered for caching [ 0.212539] NFS: Registering the id_resolver key type [ 0.212561] Key type id_resolver registered [ 0.212570] Key type id_legacy registered [ 0.212588] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.214747] Key type asymmetric registered [ 0.214757] Asymmetric key parser 'x509' registered [ 0.214864] bounce: pool size: 64 pages [ 0.214908] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.215061] io scheduler noop registered [ 0.215071] io scheduler deadline registered (default) [ 0.215213] io scheduler cfq registered [ 0.215223] io scheduler mq-deadline registered (default) [ 0.215234] io scheduler kyber registered [ 0.238551] brcm-pcie fd500000.pcie: dmabounce: initialised - 32768 kB, threshold 0x00000000c0000000 [ 0.238570] brcm-pcie fd500000.pcie: could not get clock [ 0.238629] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 0.238665] brcm-pcie fd500000.pcie: MEM 0x600000000..0x603ffffff -> 0xf8000000 [ 0.291838] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC) [ 0.292109] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 0.292124] pci_bus 0000:00: root bus resource [bus 00-01] [ 0.292140] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff]) [ 0.292182] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 0.292314] pci 0000:00:00.0: PME# supported from D0 D3hot [ 0.295009] PCI: bus0: Fast back to back transfers disabled [ 0.295026] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.295187] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 0.295245] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 0.295409] pci 0000:01:00.0: PME# supported from D0 D3cold [ 0.298032] PCI: bus1: Fast back to back transfers disabled [ 0.298047] pci_bus 0000:01: busn_res: [bus 01] end is updated to 01 [ 0.298091] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 0.298110] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 0.298140] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.298157] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 0.298214] pci 0000:00:00.0: enabling device (0140 -> 0142) [ 0.298236] pci 0000:01:00.0: enabling device (0140 -> 0142) [ 0.299967] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [ 0.301948] iproc-rng200 fe104000.rng: hwrng registered [ 0.302165] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 0.302669] vc-sm: Videocore shared memory driver [ 0.303059] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 0.312798] brd: module loaded [ 0.322149] loop: module loaded [ 0.322862] Loading iSCSI transport class v2.0-870. [ 0.324486] libphy: Fixed MDIO Bus: probed [ 0.324904] bcmgenet fd580000.genet: failed to get enet clock [ 0.324919] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000 [ 0.324935] bcmgenet fd580000.genet: failed to get enet-wol clock [ 0.324950] bcmgenet fd580000.genet: failed to get enet-eee clock [ 0.325201] unimac-mdio unimac-mdio.-19: DMA mask not set [ 0.341832] libphy: bcmgenet MII bus: probed [ 0.382318] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus at 0x(ptrval) [ 0.383194] usbcore: registered new interface driver r8152 [ 0.383251] usbcore: registered new interface driver lan78xx [ 0.383301] usbcore: registered new interface driver smsc95xx [ 0.383549] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 0.383577] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 0.385308] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000000000000890 [ 0.385465] genirq: irq_chip Brcm_MSI did not update eff. affinity mask of irq 56 [ 0.386069] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 0.386082] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.386094] usb usb1: Product: xHCI Host Controller [ 0.386104] usb usb1: Manufacturer: Linux 4.19.57-v7l+ xhci-hcd [ 0.386115] usb usb1: SerialNumber: 0000:01:00.0 [ 0.386621] hub 1-0:1.0: USB hub found [ 0.386673] hub 1-0:1.0: 1 port detected [ 0.387072] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 0.387093] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 0.387111] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 0.387443] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 0.387456] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.387467] usb usb2: Product: xHCI Host Controller [ 0.387478] usb usb2: Manufacturer: Linux 4.19.57-v7l+ xhci-hcd [ 0.387488] usb usb2: SerialNumber: 0000:01:00.0 [ 0.387972] hub 2-0:1.0: USB hub found [ 0.388025] hub 2-0:1.0: 4 ports detected [ 0.389100] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.414650] dwc_otg fe980000.usb: base=(ptrval) [ 0.614948] Core Release: 2.80a [ 0.614960] Setting default values for core params [ 0.614986] Finished setting default values for core params [ 0.815306] Using Buffer DMA mode [ 0.815315] Periodic Transfer Interrupt Enhancement - disabled [ 0.815324] Multiprocessor Interrupt Enhancement - disabled [ 0.815334] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 0.815391] Dedicated Tx FIFOs mode [ 0.816047] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = ded30000 dma = 0x00000000ded30000 len=9024 [ 0.816069] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 0.816080] dwc_otg: Microframe scheduler enabled [ 0.816142] WARN::hcd_init_fiq:457: FIQ on core 1 [ 0.816159] WARN::hcd_init_fiq:458: FIQ ASM at c07ae05c length 36 [ 0.816175] WARN::hcd_init_fiq:497: MPHI regs_base at f0810200 [ 0.816209] dwc_otg fe980000.usb: DWC OTG Controller [ 0.816238] dwc_otg fe980000.usb: new USB bus registered, assigned bus number 3 [ 0.816277] dwc_otg fe980000.usb: irq 37, io mem 0x00000000 [ 0.816325] Init: Port Power? op_state=1 [ 0.816334] Init: Power Port (0) [ 0.816579] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 0.816592] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.816603] usb usb3: Product: DWC OTG Controller [ 0.816613] usb usb3: Manufacturer: Linux 4.19.57-v7l+ dwc_otg_hcd [ 0.816624] usb usb3: SerialNumber: fe980000.usb [ 0.817116] hub 3-0:1.0: USB hub found [ 0.817164] hub 3-0:1.0: 1 port detected [ 0.817726] dwc_otg: FIQ enabled [ 0.817735] dwc_otg: NAK holdoff enabled [ 0.817744] dwc_otg: FIQ split-transaction FSM enabled [ 0.817757] Module dwc_common_port init [ 0.817955] usbcore: registered new interface driver uas [ 0.818069] usbcore: registered new interface driver usb-storage [ 0.818237] mousedev: PS/2 mouse device common for all mice [ 0.819381] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 0.819558] bcm2835-cpufreq: min=600000 max=1500000 [ 0.820102] sdhci: Secure Digital Host Controller Interface driver [ 0.820111] sdhci: Copyright(c) Pierre Ossman [ 0.820486] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe [ 0.820854] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.823857] ledtrig-cpu: registered to indicate activity on CPUs [ 0.823992] hidraw: raw HID events driver (C) Jiri Kosina [ 0.824120] usbcore: registered new interface driver usbhid [ 0.824129] usbhid: USB HID core driver [ 0.824819] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0 [ 0.826099] [vc_sm_connected_init]: start [ 0.832235] [vc_sm_connected_init]: end - returning 0 [ 0.833275] Initializing XFRM netlink socket [ 0.833301] NET: Registered protocol family 17 [ 0.833374] Key type dns_resolver registered [ 0.833766] Registering SWP/SWPB emulation handler [ 0.834336] registered taskstats version 1 [ 0.834352] Loading compiled-in X.509 certificates [ 0.842026] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 0.842086] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 33, base_baud = 0) is a PL011 rev2 [ 0.845341] console [ttyS0] disabled [ 0.845373] fe215040.serial: ttyS0 at MMIO 0x0 (irq = 35, base_baud = 62500000) is a 16550 [ 0.845425] console [ttyS0] enabled [ 0.845864] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 0.846328] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver [ 0.846939] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 0.846950] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 0.872358] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.1 [ 0.888507] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 0.890095] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.891682] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.894636] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 0.896222] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 0.904629] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA [ 0.907103] of_cfs_init [ 0.907182] of_cfs_init: OK [ 0.907746] Waiting for root device PARTUUID=d20c85a3-02... [ 0.952994] random: fast init done [ 0.961918] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 0.964791] mmc1: new high speed SDIO card at address 0001 [ 1.008112] mmc0: new ultra high speed DDR50 SDXC card at address aaaa [ 1.009156] mmcblk0: mmc0:aaaa SN128 119 GiB [ 1.010400] mmcblk0: p1 p2 [ 1.028588] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.028635] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.029187] devtmpfs: mounted [ 1.035655] Freeing unused kernel memory: 2048K [ 1.062061] Run /sbin/init as init process [ 1.162994] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20 [ 1.163010] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.163021] usb 1-1: Product: USB2.0 Hub [ 1.164586] hub 1-1:1.0: USB hub found [ 1.164814] hub 1-1:1.0: 4 ports detected [ 1.421861] systemd[1]: System time before build time, advancing clock. [ 1.499601] NET: Registered protocol family 10 [ 1.500779] Segment Routing with IPv6 [ 1.531035] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 1.531687] systemd[1]: Detected architecture arm. [ 1.539859] systemd[1]: Set hostname to <raspberrypi>. [ 1.549466] random: systemd: uninitialized urandom read (16 bytes read) [ 1.549514] systemd[1]: Initializing machine ID from random generator. [ 1.549666] systemd[1]: Installed transient /etc/machine-id file. [ 1.553266] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 1.788839] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 1.788859] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 2.140101] random: systemd: uninitialized urandom read (16 bytes read) [ 2.148841] random: systemd: uninitialized urandom read (16 bytes read) [ 2.149155] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 2.149971] systemd[1]: Listening on udev Control Socket. [ 2.303142] i2c /dev entries driver [ 2.763147] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 2.849026] systemd-journald[115]: Received request to flush runtime journal from PID 1 [ 3.431151] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 3.433861] media: Linux media interface: v0.10 [ 3.434020] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 3.434034] [vc_sm_connected_init]: start [ 3.475678] videodev: Linux video capture interface: v2.00 [ 3.487856] [vc_sm_connected_init]: installed successfully [ 3.500323] argon-mem feb00000.hevc-decoder: argon-hevcmem initialised: Registers at 0xfeb00000 length 0x0000ffff [ 3.500887] argon-mem feb10000.argon-local-intc: argon-intcmem initialised: Registers at 0xfeb10000 length 0x00000fff [ 3.502003] argon-mem feb20000.h264-decoder: argon-h264mem initialised: Registers at 0xfeb20000 length 0x0000ffff [ 3.504447] argon-mem feb30000.vp9-decoder: argon-vp9mem initialised: Registers at 0xfeb30000 length 0x0000ffff [ 3.506175] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 3.524341] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 3.534170] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 3.534183] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 3.545196] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 3.545209] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 3.550860] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 3.550874] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 3.568293] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 3.588762] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 3.624046] bcm2835_audio soc:audio: card created with 8 channels [ 3.749414] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0 [ 3.844669] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.848855] [drm] No displays found. Consider forcing hotplug if HDMI is attached [ 3.848941] vc4-drm soc:gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4]) [ 3.849388] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 1 [ 3.849399] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.849408] [drm] No driver support for vblank timestamp query. [ 3.849417] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL [ 3.958384] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.026124] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 4.042608] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 4.043230] usbcore: registered new interface driver brcmfmac [ 4.263161] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 4.276712] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04 [ 5.893570] random: crng init done [ 5.893584] random: 7 urandom warning(s) missed due to ratelimiting [ 6.024865] uart-pl011 fe201000.serial: no DMA platform data [ 6.134458] 8021q: 802.1Q VLAN Support v1.8 [ 6.334148] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 6.344036] EXT4-fs (mmcblk0p2): resizing filesystem from 855040 to 31149568 blocks [ 6.718483] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 6.718499] brcmfmac: power management disabled [ 7.132083] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay) [ 7.132433] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.151909] bcmgenet fd580000.genet eth0: Link is Down [ 12.312080] bcmgenet fd580000.genet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 12.312115] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 13.113622] Bluetooth: Core ver 2.22 [ 13.113703] NET: Registered protocol family 31 [ 13.113713] Bluetooth: HCI device and connection manager initialized [ 13.115494] Bluetooth: HCI socket layer initialized [ 13.115516] Bluetooth: L2CAP socket layer initialized [ 13.115578] Bluetooth: SCO socket layer initialized [ 13.396148] Bluetooth: HCI UART driver ver 2.3 [ 13.396161] Bluetooth: HCI UART protocol H4 registered [ 13.396242] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 13.396475] Bluetooth: HCI UART protocol Broadcom registered [ 14.988105] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.988118] Bluetooth: BNEP filters: protocol multicast [ 14.988137] Bluetooth: BNEP socket layer initialized [ 15.234257] Bluetooth: RFCOMM TTY layer initialized [ 15.234279] Bluetooth: RFCOMM socket layer initialized [ 15.234307] Bluetooth: RFCOMM ver 1.11 [ 16.514799] EXT4-fs (mmcblk0p2): resized to 6291456 blocks [ 27.479223] EXT4-fs (mmcblk0p2): resized to 12058624 blocks [ 38.299251] EXT4-fs (mmcblk0p2): resized to 17825792 blocks [ 48.615926] EXT4-fs (mmcblk0p2): resized to 23068672 blocks [ 58.903182] EXT4-fs (mmcblk0p2): resized to 28311552 blocks [ 65.063366] EXT4-fs (mmcblk0p2): resized filesystem to 31149568

Follow-Ups:

Re: RPi 4B+ ?
- From: Michael van Elst