Re: TESTERS WANTED: new start code

To: Nick Hudson <nick.hudson%gmx.co.uk@localhost>
Subject: Re: TESTERS WANTED: new start code
From: Lwazi Dube <lwazeh%gmail.com@localhost>
Date: Fri, 10 May 2019 22:57:19 -0400
On Sat, 4 May 2019 at 05:06, Nick Hudson <nick.hudson%gmx.co.uk@localhost> wrote:
>
> Hi,
>
> I've updated the following kernels to use the generic start code and,
> ideally, thse new kernels would be tested before I commit my work
>
> ARMADILLO-IOT-G3
> BEAGLEBOARD
> BEAGLEBOARDXM
> BEAGLEBONE
> DUOVERO
> GUMSTIX
> IGEPV2
> KOBO
> NETWALKER
> OMAP5EVM
> OVERO
> PANDABOARD
> PEPPER
> VTC100
>
> Kernels are available here:
>
>         http://ftp.netbsd.org/pub/NetBSD/misc/skrll/arm-generic/
>
>
> Thanks,
> Nick

BEAGLEBONE white:

[   1.0000000] uboot arg = 0x1, 0x8df271bc, 0x8df271bc, 0x80300000
[   1.0000000] [ Kernel symbol table missing! ]
[   1.0000000] ksyms: checking .text
[   1.0000000] ksyms: checking .eh_frame
[   1.0000000] ksyms: checking link_set_sysctl_funcs
[   1.0000000] ksyms: checking link_set_evcnts
[   1.0000000] ksyms: checking link_set_modules
[   1.0000000] ksyms: checking link_set_ieee80211_funcs
[   1.0000000] ksyms: checking link_set_domains
[   1.0000000] ksyms: checking link_set_sdt_argtypes_set
[   1.0000000] ksyms: checking link_set_sdt_probes_set
[   1.0000000] ksyms: checking link_set_sdt_providers_set
[   1.0000000] ksyms: checking link_set_dkwedge_methods
[   1.0000000] ksyms: checking link_set_prop_linkpools
[   1.0000000] ksyms: checking .data
[   1.0000000] ksyms: checking .bss
[   1.0000000] ksyms: checking _init_memory
[   1.0000000] ksyms: checking .ARM.attributes
[   1.0000000] ksyms: checking .ident
[   1.0000000] ksyms: checking .comment
[   1.0000000] ksyms: checking .note.netbsd.ident
[   1.0000000] ksyms: checking .SUNW_ctf
[   1.0000000] Found CTF at 0x808e77ec, size 0x59f89
[   1.0000000] Loaded initial symtab at 0x80941778, strtab at
0x80994968, # entries 21279
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002,
2003, 2004, 2005,
[   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017,
[   1.0000000]     2018, 2019 The NetBSD Foundation, Inc.  All rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All
rights reserved.

[   1.0000000] NetBSD 8.99.37 (BEAGLEBONE) #0: Sun Apr 28 09:57:30 BST 2019
[   1.0000000]
nick@zoom:/home/nick/netbsd/arm-generic/obj.evbearmv7hf-el/sys/arch/evbarm/compile/BEAGLEBONE
[   1.0000000] total memory = 256 MB
[   1.0000000] avail memory = 242 MB
[   1.0000000] timecounter: Timecounters tick every 10.000 msec
[   1.0000000] mainbus0 (root)
[   1.0000000] cpu0 at mainbus0 core 0: 600 MHz Cortex-A8 r3p2 (Cortex V7A core)
[   1.0000000] cpu0: DC enabled IC enabled WB enabled LABT branch
prediction enabled
[   1.0000000] cpu0: 32KB/64B 4-way L1 VIPT Instruction cache
[   1.0000000] cpu0: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache
[   1.0000000] cpu0: 256KB/64B 8-way write-through L2 PIPT Unified cache
[   1.0000000] vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN
propagation, denormals
[   1.0000000] obio0 at mainbus0 base 0x44c00000-0x44ffffff: On-Board IO
[   1.0000000] prcm0 at obio0 addr 0x44e00000-0x44e01fff: Power, Reset
and Clock Management
[   1.0000000] sitaracm0 at obio0 addr 0x44e10000-0x44e11fff: control
module, rev 1.0
[   1.0000000] sitaracm0: AM3359 Silicon Revision 1.0:
0x20ff0383<ICSS,CPSW,DCAN,ICSS_FEA EtherCAT
functionality=0x0=disabled,ICSS_FEA TX_AUTO_SEQUENCE=0x0=disabled>
[   1.0000000] obio1 at mainbus0 base 0x48000000-0x48ffffff: On-Board IO
[   1.0000000] omapicu0 at obio1 addr 0x48200000-0x48200fff intrbase 0
[   1.0000000] omapgpio1 at obio1 addr 0x4804c000-0x4804cfff
[   1.0000000] gpio1 at omapgpio1: 32 pins
[   1.0000000] omapgpio2 at obio1 addr 0x481ac000-0x481acfff
[   1.0000000] gpio2 at omapgpio2: 32 pins
[   1.0000000] omapgpio3 at obio1 addr 0x481ae000-0x481aefff
[   1.0000000] gpio3 at omapgpio3: 32 pins
[   1.0000000] obio2 at mainbus0 base 0x4a000000-0x4affffff: On-Board IO
[   1.0000000] gpmc0 at mainbus0 base 0x50000000: General Purpose
Memory Controller, rev 6.0
[   1.0000000] gpmc0: CS#0 valid, addr 0x00000000, size  16MB
[   1.0000000] edma0 at mainbus0 base 0x49000000-0x490fffff
[   1.0000000] tiotg0 at mainbus0 base 0x47400000-0x47404fff: TI
dual-port USB controller: version v1.0.0.13
[   1.0000000] motg0 at tiotg0 port 0: 0x4ea20800 version v0.0.0
[   1.0000000] motg0: Dynamic FIFO sizing detected, assuming 16Kbytes
of FIFO RAM
[   1.0000000] usb0 at motg0: USB revision 2.0
[   1.0000000] motg1 at tiotg0 port 1: 0x4ea20800 version v0.0.0
[   1.0000000] motg1: Dynamic FIFO sizing detected, assuming 16Kbytes
of FIFO RAM
[   1.0000000] usb1 at motg1: USB revision 2.0
[   1.0000000] com0 at obio0 addr 0x44e09000-0x44e09fff intr 72: OMAP
UART, working fifo
[   1.0000000] com0: console
[   1.0000000] omapgpio0 at obio0 addr 0x44e07000-0x44e07fff
[   1.0000000] gpio0 at omapgpio0: 32 pins
[   1.0000000] tiiic0 at obio0 addr 0x44e0b000-0x44e0bfff intr 70: rev
0.11, scheme 1
[   1.0000000] tiiic0: 32-bytes FIFO
[   1.0000000] iic0 at tiiic0: I2C bus
[   1.0000000] omapdmtimer1 at obio0 addr 0x44e31000-0x44e31fff intr
67: DMTIMER1ms
[   1.0000000] omapwdt32k0 at obio0 addr 0x44e35000-0x44e35fff: rev 0.1
[   1.0000000] sdhc0 at obio1 addr 0x48060000-0x48060fff intr 64: SDHC
controller
[   1.0000000] sdhc0: EDMA tx channel 24, rx channel 25
[   1.0000000] sdhc0: SDHC 2.0, rev 49, platform DMA, 96000 kHz, HS
1.8V 3.0V, 1024 byte blocks
[   1.0000000] sdmmc0 at sdhc0 slot 0
[   1.0000000] sdhc1 at obio1 addr 0x481d8000-0x481d8fff intr 28: SDHC
controller
[   1.0000000] sdhc1: EDMA tx channel 2, rx channel 3
[   1.0000000] sdhc1: SDHC 2.0, rev 49, platform DMA, 96000 kHz, HS
1.8V, 1024 byte blocks
[   1.0000000] sdmmc1 at sdhc1 slot 0
[   1.0000000] omapdmtimer0 at obio1 addr 0x48040000-0x48040fff intr
68: DMTIMER2
[   1.0000000] omapdmtimer2 at obio1 addr 0x48044000-0x48044fff intr
92: DMTIMER4
[   1.0000000] trng0 at obio1 addr 0x48310000-0x48311fff intr 111
[   1.0000000] cpsw0 at obio2 addr 0x4a100000-0x4a107fff intrbase 40:
TI Layer 2 3-Port Switch
[   1.0000000] ukphy0 at cpsw0 phy 0: OUI 0x00800f, model 0x000f, rev. 1
[   1.0000000] ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[   1.0000000] timecounter: Timecounter "clockinterrupt" frequency 100
Hz quality 0
[   1.0000030] timecounter: Timecounter "dmtimer" frequency 24000000
Hz quality 100
[   1.2126182] sdhc0: cmd timeout error
[   1.2347628] sdhc1: cmd timeout error
[   1.2626185] uhub0 at usb0: NetBSD (0000) MOTG root hub (0000),
class 9/0, rev 2.00/1.00, addr 1
[   1.2778617] uhub0: 1 port with 1 removable, self powered
[   1.3126204] sdmmc1: sdmmc_mem_enable failed with error 60
[   1.3126204] sdmmc1: couldn't enable card: 60
[   1.3229887] uhub1 at usb1: NetBSD (0000) MOTG root hub (0000),
class 9/0, rev 2.00/1.00, addr 1
[   1.3229887] uhub1: 1 port with 1 removable, self powered
[   1.3926255] IPsec: Initialized Security Association Processing.
[   1.4226206] sdmmc0: SD card status: 4-bit, C2
[   1.4226206] ld0 at sdmmc0: <0x02:0x544d:SA02G:0x07:0x3063e4f9:0x0b9>
[   1.4340629] ld0: 1858 MB, 943 cyl, 64 head, 63 sec, 512 bytes/sect
x 3805184 sectors
[   1.4426213] ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz
[   2.0526182] crypto: assign driver 0, flags 2
[   2.0526182] crypto: driver 0 registers alg 1 flags 0 maxoplen 0
[   2.0636640] crypto: driver 0 registers alg 2 flags 0 maxoplen 0
[   2.0636640] crypto: driver 0 registers alg 3 flags 0 maxoplen 0
[   2.0755281] crypto: driver 0 registers alg 4 flags 0 maxoplen 0
[   2.0755281] crypto: driver 0 registers alg 5 flags 0 maxoplen 0
[   2.0873875] crypto: driver 0 registers alg 26 flags 0 maxoplen 0
[   2.0934038] crypto: driver 0 registers alg 27 flags 0 maxoplen 0
[   2.0934038] crypto: driver 0 registers alg 29 flags 0 maxoplen 0
[   2.1054324] crypto: driver 0 registers alg 33 flags 0 maxoplen 0
[   2.1054324] crypto: driver 0 registers alg 17 flags 0 maxoplen 0
[   2.1174747] crypto: driver 0 registers alg 6 flags 0 maxoplen 0
[   2.1233973] crypto: driver 0 registers alg 19 flags 0 maxoplen 0
[   2.1233973] crypto: driver 0 registers alg 7 flags 0 maxoplen 0
[   2.1353447] crypto: driver 0 registers alg 20 flags 0 maxoplen 0
[   2.1353447] crypto: driver 0 registers alg 15 flags 0 maxoplen 0
[   2.1473865] crypto: driver 0 registers alg 24 flags 0 maxoplen 0
[   2.1533977] crypto: driver 0 registers alg 25 flags 0 maxoplen 0
[   2.1533977] crypto: driver 0 registers alg 8 flags 0 maxoplen 0
[   2.1653442] crypto: driver 0 registers alg 21 flags 0 maxoplen 0
[   2.1653442] crypto: driver 0 registers alg 16 flags 0 maxoplen 0
[   2.1773792] crypto: driver 0 registers alg 9 flags 0 maxoplen 0
[   2.1833165] crypto: driver 0 registers alg 10 flags 0 maxoplen 0
[   2.1833165] crypto: driver 0 registers alg 13 flags 0 maxoplen 0
[   2.1953438] crypto: driver 0 registers alg 14 flags 0 maxoplen 0
[   2.1953438] crypto: driver 0 registers alg 28 flags 0 maxoplen 0
[   2.2073786] crypto: driver 0 registers alg 30 flags 0 maxoplen 0
[   2.2134052] crypto: driver 0 registers alg 31 flags 0 maxoplen 0
[   2.2134052] crypto: driver 0 registers alg 32 flags 0 maxoplen 0
[   2.2254388] crypto: driver 0 registers alg 11 flags 0 maxoplen 0
[   2.2254388] crypto: driver 0 registers alg 18 flags 0 maxoplen 0
[   2.2374657] crypto: driver 0 registers alg 23 flags 0 maxoplen 0
[   2.2434903] crypto: driver 0 registers alg 22 flags 0 maxoplen 0
[   2.2434903] WARNING: 1 error while detecting hardware; check system log.
[   2.2564709] boot device: <unknown>
[   2.2564709] root device:
Follow-Ups:
- Re: TESTERS WANTED: new start code
  - From: Nick Hudson
References:
- TESTERS WANTED: new start code
  - From: Nick Hudson
Prev by Date: Re: TESTERS WANTED: new start code
Next by Date: Re: TESTERS WANTED: new start code
Previous by Thread: Re: TESTERS WANTED: new start code
Next by Thread: Re: TESTERS WANTED: new start code
Indexes:
Home | Main Index | Thread Index | Old Index