Port-arm archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: evbarm port on the Beagle Bones / Beagle Boards
On 05/05/17 02:18, Sevan Janiyan wrote:
On 05/05/2017 01:08, Hans Bentum wrote:
I try to test this for the beaglebone black.
It is not clear for me where to place the bbb-boot.scr. I don't see a
boot.scr on the DOS partition to replace. Can you explain what the file
is I have to replace?
I see it on the latest armv7.img I downloaded before I sent this but no
worries, do:
cp bbb-boot.scr /path/to/dos/partition/boot.scr
I put the MLO and the u-boot.img from the bbb-ub-201703.tbz2 file into
the DOS partition. Is this correct?
Yes
Sevan
Hello,
I copied the MLO, u-boot.img and the boot.scr to the dos partition. The
beaglebone boots, but the resize does not succeed. The system reboots.
This is a repeating process.
I disabled the resizing in the rc.conf file and added a boot.cfg file to
disable the console (I use a serial console)
boot.cfg:
menu=Boot with serial console:consdev com0;boot
The bbb boots, but the armv7.img seems not stable because the system
reboots after some time.
I don't have these problems with the NetBSD 7.1 release.
Hans
dmesg:
# cu -l /dev/ttyU0 -s 115200
Connected
U-Boot SPL 2017.03 (Apr 19 2017 - 00:34:22)
Trying to boot from MMC1
MMC partition switch failed
*** Warning - MMC partition switch failed, using default environment
reading u-boot.img
reading u-boot.img
U-Boot 2017.03 (Apr 19 2017 - 00:34:22 +0100)
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 512 MiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
*** Warning - bad CRC, using default environment
<ethaddr> not set. Validating first E-fuse MAC
Net: cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
reading boot.scr
227 bytes read in 5 ms (43.9 KiB/s)
Running bootscript from mmc0 ...
## Executing script at 82000000
reading netbsd-BEAGLEBONE.ub
3744896 bytes read in 241 ms (14.8 MiB/s)
## Booting kernel from Legacy Image at 82000000 ...
Image Name: NetBSD/beagle 7.1.0_PATCH
Created: 2017-05-03 12:11:30 UTC
Image Type: ARM NetBSD Kernel Image (uncompressed)
Data Size: 3744832 Bytes = 3.6 MiB
Load Address: 80300000
Entry Point: 80300000
Verifying Checksum ... OK
Loading Kernel Image ... OK
## Transferring control to NetBSD stage-2 loader (at address 80300000) ...
defgh
uboot arg = 0x9df31fb0, 0, 0x9ff9bd40, 0x9df3bd78
[ Kernel symbol table missing! ]
Loaded initial symtab at 0x8060597c, strtab at 0x806378ec, # entries 12053
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.1.0_PATCH (BEAGLEBONE.201705031020Z)
total memory = 512 MB
avail memory = 503 MB
sysctl_createv: sysctl_create(machine_arch) returned 17
kern.module.path=/stand/evbarm/7.1/modules
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root)
cpu0 at mainbus0 core 0: 1000 MHz Cortex-A8 r3p2 (Cortex V7A core)
cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu0: isar: [0]=0x101111 [1]=0x13112111 [2]=0x21232031 [3]=0x11112131,
[4]=0x11142, [5]=0
cpu0: mmfr: [0]=0x1100003 [1]=0x20000000 [2]=0x1202000 [3]=0x211
cpu0: pfr: [0]=0x1131 [1]=0x11
cpu0: 32KB/64B 4-way L1 VIPT Instruction cache
cpu0: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache
cpu0: 256KB/64B 8-way write-through L2 PIPT Unified cache
vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
vfp0: mvfr: [0]=0x11110222 [1]=0x11111
obio0 at mainbus0 base 0x44000000-0x4fffffff: On-Board IO
omapicu0 at obio0 addr 0x48200000-0x48200fff intrbase 0
prcm0 at obio0 addr 0x44e00000-0x44e01fff: Power, Reset and Clock Management
sitaracm0 at obio0 addr 0x44e10000-0x44e11fff: control module, rev 1.0
edma0 at obio0 addr 0x49000000-0x490fffff intrbase 12
gpmc0 at mainbus0 base 0x50000000: General Purpose Memory Controller, rev 6.0
gpmc0: CS#0 valid, addr 0x00000000, size 16MB
com0 at obio0 addr 0x44e09000-0x44e09fff intr 72: ns16550a, working fifo
com0: console
sdhc0 at obio0 addr 0x48060100-0x48060fff intr 64sdhc0: EDMA tx channel 24, rx
channel 25
: SDHC controller (EDMA)
sdhc0: SD Host Specification 2.0, rev.49
sdhc0: using DMA transfer
sdmmc0 at sdhc0 slot 0
sdhc1 at obio0 addr 0x481d8100-0x481d8fff intr 28sdhc1: EDMA tx channel 2, rx
channel 3
: SDHC controller (EDMA)
sdhc1: SD Host Specification 2.0, rev.49
sdhc1: using DMA transfer
sdmmc1 at sdhc1 slot 0
tiiic0 at obio0 addr 0x44e0b000-0x44e0bfff intr 70: rev 0.11
iic0 at tiiic0: I2C bus
seeprom0 at iic0 addr 0x50: AT24Cxx or compatible EEPROM: size 32768
tps65217pmic0 at iic0 addr 0x24: TPS65217C Power Management Multi-Channel IC
(rev 1.2)
tps65217pmic0: power sources [USB] max 1800 mA, AC max 2500 mA
tps65217pmic0: [LDO1: 1800 mV] [LDO2: 3300 mV] [LDO3: 1800 mV] [LDO4: 3300 mV]
[DCDC1: 1500 mV] [DCDC2: 1325 mV] [DCDC3: 1125 mV]
omapdmtimer0 at obio0 addr 0x48040000-0x48040fff intr 68: DMTIMER2
omapdmtimer1 at obio0 addr 0x44e31000-0x44e31fff intr 67: DMTIMER1ms
omapdmtimer2 at obio0 addr 0x48044000-0x48044fff intr 92: DMTIMER4
omapwdt32k0 at obio0 addr 0x44e35000-0x44e35fff: rev 0.1
tiotg0 at obio0 addr 0x47400000-0x47404fff intrbase 17: TI dual-port USB
controller: version v1.0.0.13
motg0 at tiotg0 port 0: 0x4ea20800 version v0.0.0
motg1 at tiotg0 port 1: 0x4ea20800 version v0.0.0
motg1: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM
usb0 at motg1: USB revision 2.0
cpsw0 at obio0 addr 0x4a100000-0x4a107fff intrbase 40: TI CPSW Ethernet
cpsw0: Ethernet address 68:c9:0b:d9:d6:b3
ukphy0 at cpsw0 phy 0WARNING: module error: vfs load failed for `miiverbose',
error 45
: OUI 0x00800f, model 0x000f, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
trng0 at obio0 addr 0x48310000-0x48311fff intr 111
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "dmtimer" frequency 24000000 Hz quality 100
uhub0 at usb0: Mentor Graphics MOTG root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
ld0 at sdmmc0: <0x03:0x5344:SL32G:0x80:0x0bca2c6b:0x0fc>
ld0: 30436 MB, 7729 cyl, 128 head, 63 sec, 512 bytes/sect x 62333952 sectors
ld0: 4-bit width, bus clock 50.000 MHz
sdmmc1: couldn't enable card: 60
boot device: ld0
root on ld0a dumps on ld0b
mountroot: trying nfs...
mountroot: trying msdos...
mountroot: trying ext2fs...
mountroot: trying ffs...
root file system type: ffs
WARNING: no TOD clock present
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
init: copying out path `/sbin/init' 11
Fri May 5 22:07:47 UTC 2017
Starting root file system check:
/dev/rld0a: INCORRECT BLOCK COUNT I=28978 (1664 should be 416) (CORRECTED)
/dev/rld0a: FREE BLK COUNT(S) WRONG IN SUPERBLK (SALVAGED)
/dev/rld0a: SUMMARY INFORMATION BAD (SALVAGED)
/dev/rld0a: BLK(S) MISSING IN BIT MAPS (SALVAGED)
/dev/rld0a: 29069 files, 433468 used, 24939 free (27 frags, 3114 blocks, 0.0%
fragmentation)
/dev/rld0a: MARKING FILE SYSTEM CLEAN
/etc/rc: WARNING: $resize_disklabel is not set properly - see rc.conf(5).
swapctl: adding /dev/ld0b as swap device at priority 0
Starting file system checks:
/dev/rld0e: 21 files, 14880 free (3720 clusters)
random_seed: /var/db/entropy-file: Not present
Setting tty flags.
WARNING: module error: vfs load failed for `wsdisplay', error 2
WARNING: module error: vfs load failed for `wsdisplay', error 2
WARNING: module error: vfs load failed for `wsdisplay', error 2
WARNING: module error: vfs load failed for `wsdisplay', error 2
Setting sysctl variables:
ddb.onpanic: 1 -> 0
Starting network.
Hostname: armv7
IPv6 mode: host
Configuring network interfaces:.
Adding interface aliases:.
Waiting for DAD completion for statically configured addresses...
Starting dhcpcd.
cpsw0: link state DOWN (was UNKNOWN)
Building databases: dev, utmp, utmpx.
WARNING: module error: vfs load failed for `wsdisplay', error 2
wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured
WARNING: module error: vfs load failed for `wsdisplay', error 2
wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured
WARNING: module error: vfs load failed for `wsdisplay', error 2
wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured
WARNING: module error: vfs load failed for `wsdisplay', error 2
wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured
Starting syslogd.
Mounting all file systems...
Clearing temporary files.
Updating fontconfig cache:[1] Segmentation fault (core dumped) ${command}
done.
Creating a.out runtime link editor directory cache.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting devpubd.
Starting local daemons:.
Updating motd.
Starting sshd.
key_load_public: invalid format
Could not load host key: /etc/ssh/ssh_host_rsa_key
key_load_public: invalid format
Could not load host key: /etc/ssh/ssh_host_dsa_key
key_load_public: invalid format
Could not load host key: /etc/ssh/ssh_host_ecdsa_key
key_load_public: invalid format
Could not load host key: /etc/ssh/ssh_host_ed25519_key
Disabling protocol version 2. Could not load host key
sshd: no hostkeys available -- exiting.
/etc/rc.d/sshd exited with code 1
Starting mdnsd.
May 5 22:08:07 armv7 mdnsd: mDNSResponder (Engineering Build) starting
Starting inetd.
May 5 22:08:07 armv7 mdnsd: mDNSPlatformSourceAddrForDest: connect 1.1.1.1
failed errno 49 (Can't assign requested address)
Starting cron.
The following components reported failures:
/etc/rc.d/sshd
See /var/run/rc.log for more information.
Fri May 5 22:08:07 UTC 2017
May 5 22:08:07 armv7 mdnsd: mDNSPlatformSendUDP got error 49 (Can't assign
requested address) sending packet to 224.0.0.251 on interface 127.0.0.1/lo0/2
NetBSD/evbarm (armv7) (console)
login: root
May 5 22:08:12 armv7 syslogd[195]: last message repeated 5 times
May 5 22:08:12 armv7 login: ROOT LOGIN (root) on tty console
Last login: Fri May 5 22:04:54 2017 on console
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.1.0_PATCH (BEAGLEBONE.201705031020Z)
Welcome to NetBSD!
Terminal type is vt100.
We recommend that you create a non-root account and use su(1) for root access.
armv7# unMay 5 22:08:15 armv7 mdnsd: mDNSPlatformSendUDP got error 49 (Can't
assign requested address) sending packet to 224.0.0.251 on interface
127.0.0.1/lo0/2
armv7# uname -a
NetBSD armv7 7.1.0_PATCH NetBSD 7.1.0_PATCH (BEAGLEBONE.201705031020Z) evbarm
armv7#
armv7#
U-Boot SPL 2017.03 (Apr 19 2017 - 00:34:22)
Trying to boot from MMC1
MMC partition switch failed
*** Warning - MMC partition switch failed, using default environment
reading u-boot.img
reading u-boot.img
U-Boot 2017.03 (Apr 19 2017 - 00:34:22 +0100)
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 512 MiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
*** Warning - bad CRC, using default environment
<ethaddr> not set. Validating first E-fuse MAC
Net: cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
reading boot.scr
227 bytes read in 5 ms (43.9 KiB/s)
Running bootscript from mmc0 ...
## Executing script at 82000000
reading netbsd-BEAGLEBONE.ub
3744896 bytes read in 241 ms (14.8 MiB/s)
## Booting kernel from Legacy Image at 82000000 ...
Image Name: NetBSD/beagle 7.1.0_PATCH
Created: 2017-05-03 12:11:30 UTC
Image Type: ARM NetBSD Kernel Image (uncompressed)
Data Size: 3744832 Bytes = 3.6 MiB
Load Address: 80300000
Entry Point: 80300000
Verifying Checksum ... OK
Loading Kernel Image ... OK
## Transferring control to NetBSD stage-2 loader (at address 80300000) ...
defgh
uboot arg = 0x9df31fb0, 0, 0x9ff9bd40, 0x9df3bd78
[ Kernel symbol table missing! ]
Loaded initial symtab at 0x8060597c, strtab at 0x806378ec, # entries 12053
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.1.0_PATCH (BEAGLEBONE.201705031020Z)
total memory = 512 MB
avail memory = 503 MB
sysctl_createv: sysctl_create(machine_arch) returned 17
kern.module.path=/stand/evbarm/7.1/modules
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root)
cpu0 at mainbus0 core 0: 1000 MHz Cortex-A8 r3p2 (Cortex V7A core)
cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu0: isar: [0]=0x101111 [1]=0x13112111 [2]=0x21232031 [3]=0x11112131,
[4]=0x11142, [5]=0
cpu0: mmfr: [0]=0x1100003 [1]=0x20000000 [2]=0x1202000 [3]=0x211
cpu0: pfr: [0]=0x1131 [1]=0x11
cpu0: 32KB/64B 4-way L1 VIPT Instruction cache
cpu0: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache
cpu0: 256KB/64B 8-way write-through L2 PIPT Unified cache
vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
vfp0: mvfr: [0]=0x11110222 [1]=0x11111
obio0 at mainbus0 base 0x44000000-0x4fffffff: On-Board IO
omapicu0 at obio0 addr 0x48200000-0x48200fff intrbase 0
prcm0 at obio0 addr 0x44e00000-0x44e01fff: Power, Reset and Clock Management
sitaracm0 at obio0 addr 0x44e10000-0x44e11fff: control module, rev 1.0
edma0 at obio0 addr 0x49000000-0x490fffff intrbase 12
gpmc0 at mainbus0 base 0x50000000: General Purpose Memory Controller, rev 6.0
gpmc0: CS#0 valid, addr 0x00000000, size 16MB
com0 at obio0 addr 0x44e09000-0x44e09fff intr 72: ns16550a, working fifo
com0: console
sdhc0 at obio0 addr 0x48060100-0x48060fff intr 64sdhc0: EDMA tx channel 24, rx
channel 25
: SDHC controller (EDMA)
sdhc0: SD Host Specification 2.0, rev.49
sdhc0: using DMA transfer
sdmmc0 at sdhc0 slot 0
sdhc1 at obio0 addr 0x481d8100-0x481d8fff intr 28sdhc1: EDMA tx channel 2, rx
channel 3
: SDHC controller (EDMA)
sdhc1: SD Host Specification 2.0, rev.49
sdhc1: using DMA transfer
sdmmc1 at sdhc1 slot 0
tiiic0 at obio0 addr 0x44e0b000-0x44e0bfff intr 70: rev 0.11
iic0 at tiiic0: I2C bus
seeprom0 at iic0 addr 0x50: AT24Cxx or compatible EEPROM: size 32768
tps65217pmic0 at iic0 addr 0x24: TPS65217C Power Management Multi-Channel IC
(rev 1.2)
tps65217pmic0: power sources [USB] max 1800 mA, AC max 2500 mA
tps65217pmic0: [LDO1: 1800 mV] [LDO2: 3300 mV] [LDO3: 1800 mV] [LDO4: 3300 mV]
[DCDC1: 1500 mV] [DCDC2: 1325 mV] [DCDC3: 1125 mV]
omapdmtimer0 at obio0 addr 0x48040000-0x48040fff intr 68: DMTIMER2
omapdmtimer1 at obio0 addr 0x44e31000-0x44e31fff intr 67: DMTIMER1ms
omapdmtimer2 at obio0 addr 0x48044000-0x48044fff intr 92: DMTIMER4
omapwdt32k0 at obio0 addr 0x44e35000-0x44e35fff: rev 0.1
tiotg0 at obio0 addr 0x47400000-0x47404fff intrbase 17: TI dual-port USB
controller: version v1.0.0.13
motg0 at tiotg0 port 0: 0x4ea20800 version v0.0.0
motg1 at tiotg0 port 1: 0x4ea20800 version v0.0.0
motg1: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM
usb0 at motg1: USB revision 2.0
cpsw0 at obio0 addr 0x4a100000-0x4a107fff intrbase 40: TI CPSW Ethernet
cpsw0: Ethernet address 68:c9:0b:d9:d6:b3
ukphy0 at cpsw0 phy 0WARNING: module error: vfs load failed for `miiverbose',
error 45
: OUI 0x00800f, model 0x000f, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
trng0 at obio0 addr 0x48310000-0x48311fff intr 111
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "dmtimer" frequency 24000000 Hz quality 100
uhub0 at usb0: Mentor Graphics MOTG root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
ld0 at sdmmc0: <0x03:0x5344:SL32G:0x80:0x0bca2c6b:0x0fc>
ld0: 30436 MB, 7729 cyl, 128 head, 63 sec, 512 bytes/sect x 62333952 sectors
ld0: 4-bit width, bus clock 50.000 MHz
sdmmc1: couldn't enable card: 60
boot device: ld0
root on ld0a dumps on ld0b
mountroot: trying nfs...
mountroot: trying msdos...
mountroot: trying ext2fs...
mountroot: trying ffs...
root file system type: ffs
WARNING: no TOD clock present
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
init: copying out path `/sbin/init' 11
Fri May 5 22:08:09 UTC 2017
Starting root file system check:
/dev/rld0a: FREE BLK COUNT(S) WRONG IN SUPERBLK (SALVAGED)
/dev/rld0a: SUMMARY INFORMATION BAD (SALVAGED)
/dev/rld0a: BLK(S) MISSING IN BIT MAPS (SALVAGED)
/dev/rld0a: 29065 files, 433783 used, 24624 free (40 frags, 3073 blocks, 0.0%
fragmentation)
/dev/rld0a: MARKING FILE SYSTEM CLEAN
/etc/rc: WARNING: $resize_disklabel is not set properly - see rc.conf(5).
swapctl: adding /dev/ld0b as swap device at priority 0
Starting file system checks:
/dev/rld0e: 21 files, 14880 free (3720 clusters)
random_seed: /var/db/entropy-file: Not present
Setting tty flags.
WARNING: module error: vfs load failed for `wsdisplay', error 2
WARNING: module error: vfs load failed for `wsdisplay', error 2
WARNING: module error: vfs load failed for `wsdisplay', error 2
WARNING: module error: vfs load failed for `wsdisplay', error 2
Setting sysctl variables:
ddb.onpanic: 1 -> 0
Starting network.
Hostname: armv7
IPv6 mode: host
Configuring network interfaces:.
Adding interface aliases:.
Waiting for DAD completion for statically configured addresses...
Starting dhcpcd.
cpsw0: link state DOWN (was UNKNOWN)
Building databases: dev, utmp, utmpx.
WARNING: module error: vfs load failed for `wsdisplay', error 2
wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured
WARNING: module error: vfs load failed for `wsdisplay', error 2
wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured
WARNING: module error: vfs load failed for `wsdisplay', error 2
wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured
WARNING: module error: vfs load failed for `wsdisplay', error 2
wsconscfg: Cannot open `/dev/ttyEcfg': Device not configured
Starting syslogd.
Mounting all file systems...
Clearing temporary files.
Updating fontconfig cache:[1] Segmentation fault (core dumped) ${command}
done.
Creating a.out runtime link editor directory cache.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting devpubd.
Starting local daemons:.
Updating motd.
Starting sshd.
key_load_public: invalid format
Could not load host key: /etc/ssh/ssh_host_rsa_key
key_load_public: invalid format
Could not load host key: /etc/ssh/ssh_host_dsa_key
key_load_public: invalid format
Could not load host key: /etc/ssh/ssh_host_ecdsa_key
key_load_public: invalid format
Could not load host key: /etc/ssh/ssh_host_ed25519_key
Disabling protocol version 2. Could not load host key
sshd: no hostkeys available -- exiting.
/etc/rc.d/sshd exited with code 1
Starting mdnsd.
May 5 22:08:27 armv7 mdnsd: mDNSResponder (Engineering Build) starting
Starting inetd.
May 5 22:08:27 armv7 mdnsd: mDNSPlatformSourceAddrForDest: connect 1.1.1.1
failed errno 49 (Can't assign requested address)
Starting cron.
The following components reported failures:
/etc/rc.d/sshd
See /var/run/rc.log for more information.
Fri May 5 22:08:27 UTC 2017
May 5 22:08:28 armv7 mdnsd: mDNSPlatformSendUDP got error 49 (Can't assign
requested address) sending packet to 224.0.0.251 on interface 127.0.0.1/lo0/2
NetBSD/evbarm (armv7) (console)
login:
Home |
Main Index |
Thread Index |
Old Index