Port-arm archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: booting BeagleBoneGreen



jdbaker%mylinuxisp.com@localhost ("John D. Baker") writes:

>> >sdmmc1: unknown CARD_TYPE: 0x17
>> >sdmmc1: mem init failed
>> >ld1 at sdmmc1: <0xfe:0x014e:P1XXXX:0x00:0x8bff58d5:0x000>
>> >ld1: 1024 MB, 1040 cyl, 32 head, 63 sec, 512 bytes/sect x 2097152 sectors
>> >ld1: 1-bit width, bus clock 96.000 MHz
>> This is embedded storage device with the Linux installation.

>Yes.  This is the eMMC device on the board but according to the BBG
>description/specification it should be 4096MB, not 1024MB.

netbsd-7 doesn't understand the card type, a side effect is that
it uses some old data fields that describe the size which is
limited to 1GB.

The netbsd-current driver does handle this.

-- 
-- 
                                Michael van Elst
Internet: mlelstv%serpens.de@localhost
                                "A potential Snark may lurk in every tree."


Home | Main Index | Thread Index | Old Index