Can't access SD card under sheevaplug

To: port-arm%netbsd.org@localhost
Subject: Can't access SD card under sheevaplug
From: Łukasz Siemiradzki <lukasz.siemiradzki%gmail.com@localhost>
Date: Sat, 5 Mar 2011 17:13:11 +0100
Hello,
 I'm not able to operate on SD card attached to Sheevaplug. I'm sure that card 
isn't broken. It contains single fat partition. Please see below:

--8<----8<----8<----8<----8<----8<----8<----8<----8<----8<----8<----8<----8<--

NetBSD 5.99.47 (ZONIAK) #1: Sun Feb 27 14:15:46 CET 2011
        root@volkov.localdomain.:/netbsd/obj/sys/arch/evbarm/compile/ZONIAK
total memory = 512 MB
avail memory = 497 MB
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root)
cpu0 at mainbus0: Sheeva 88SV131 rev 1 (ARM9E-S core)
cpu0: DC enabled IC enabled WB enabled EABT branch prediction enabled
cpu0: 16KB/32B 4-way Instruction cache
cpu0: 16KB/32B 4-way write-back-locking-C Data cache
mvsoc0 at mainbus0: Marvell 88F6281 Rev. A0  Kirkwood
mvsoc0: CPU Clock 1200.000 MHz  SysClock 400.000 MHz  TClock 200.000 MHz
mvsoctmr0 at mvsoc0 unit 0 offset 0x20300-0x203ff: Marvell SoC Timer
mvsocgpp at mvsoc0 unit 0 not configured
com0 at mvsoc0 unit 0 offset 0x12000-0x1201f irq 33: ns16550a, working fifo
com0: console
com1 at mvsoc0 unit 1 offset 0x12100-0x1211f irq 34: ns16550a, working fifo
ehci0 at mvsoc0 unit 0 offset 0x50000-0x51fff irq 19: Marvell USB 2.0 Interface
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
gttwsi0 at mvsoc0 unit 0 offset 0x11000-0x11fff irq 29: Marvell TWSI controller
iic0 at gttwsi0: I2C bus
mvcesa at mvsoc0 unit 0 not configured
mvgbec0 at mvsoc0 unit 0 offset 0x70000-0x73fff: Marvell Gigabit Ethernet 
Controller
mvgbe0 at mvgbec0 port 0 irq 11
mvgbe0: Ethernet address 00:50:43:01:4c:aa
makphy0 at mvgbe0 phy 0: Marvell 88E1116R Gigabit PHY, rev. 0
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-
FDX, auto
mvgbec1 at mvsoc0 unit 1 offset 0x74000-0x77fff: Marvell Gigabit Ethernet 
Controller
mvgbe at mvgbec1 port 0 not configured
mvpex at mvsoc0 unit 0 not configured
mvsata at mvsoc0 unit 0 not configured
mvsdio0 at mvsoc0 unit 0 offset 0x90000-0x9ffff irq 28: Marvell Secure Digital 
Input/Output Interface
sdmmc0 at mvsdio0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "mvsoctmr" frequency 200000000 Hz quality 100
uhub0 at usb0: Marvell EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
IPsec: Initialized Security Association Processing.
d0 at sdmmc0: <SDC  >
ld0: 3839 MB, 1949 cyl, 64 head, 63 sec, 512 bytes/sect x 7862272 sectors
ld0: 4-bit width, bus clock 50.000 MHz
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: Corsair Flash Voyager, rev 2.00/11.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Corsair, Flash Voyager, 1100> disk removable
sd0: fabricating a geometry
sd0: 15488 MB, 15488 cyl, 64 head, 32 sec, 512 bytes/sect x 31719424 sectors
boot device: <unknown>
root device: ?
use one of: mvgbe0 ld0[a-h] sd0[a-h] ddb halt reboot
root device: ld0a
dump device (default ld0b): 
file system (default generic): ?
use one of: generic nfs msdos ext2fs ffs ddb halt reboot
file system (default generic): nfs
root on ld0a dumps on ld0b
ld0c: error reading fsbn 6 (ld0 bn 6; cn 0 tn 0 sn 6)
ld0: filecore boot block I/O error
vfs_mountroot: can't open root device
cannot mount root, error = 6
root device (default ld0a): ?
use one of: mvgbe0 ld0[a-h] sd0[a-h] ddb halt reboot
root device (default ld0a): mvgbe0
dump device: 
file system (default nfs): ?
use one of: generic nfs msdos ext2fs ffs ddb halt reboot
file system (default nfs): nfs
root on mvgbe0
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP next-server: 192.168.1.5
nfs_boot: my_domain=localdomain
nfs_boot: my_addr=192.168.1.31
nfs_boot: my_mask=255.255.255.0
nfs_boot: gateway=192.168.1.1
root on DHCPserver:/usr/local/jails/192.168.1.40/netbsd/destdir
root time: 0x4d6a5218
WARNING: no TOD clock present
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
warning: no /dev/console
init path (default /sbin/init): 
init: copying out path `/sbin/init' 11
WARNING: negative runtime; monotonic clock has gone backwards
Sun Feb 27 13:31:42 UTC 2011
Not checking /: fs_passno = 0 in /etc/fstab
Starting file system checks:
Setting tty flags.
Setting sysctl variables:
ddb.onpanic: 1 -> 0
Starting network.
Hostname: rut
NIS domainname: localdomain
IPv6 mode: host
Configuring network interfaces:.
Adding interface aliases:.
DHCPserver:/usr/local/warden/jails/192.168.1.40/netbsd/destdir: inaccurate wcc 
data (mtime) detected, disabling wcc (ctime 1299339990.841347714 
1299339990.841347714, mtime 1299339990.841347714 1299339990.841347714)
Building databases: dev, utmp, utmpx, services done
Starting syslogd.
Mounting all filesystems...
Clearing temporary files.
Creating a.out runtime link editor directory cache.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
/etc/rc: WARNING: No swap space configured!
/etc/rc.d/swap2 exited with code 1
Starting virecover.
Checking for core dump...
savecore: no core dump (no dumpdev)
Starting local daemons:.
Updating motd.
Starting sshd.
Starting inetd.
Starting httpd.
Starting cron.
The following components reported failures:
    /etc/rc.d/swap2
See /var/run/rc.log for more information.
Sun Feb 27 13:32:59 UTC 2011

NetBSD/evbarm (rut) (console)

login:
--8<----8<----8<----8<----8<----8<----8<----8<----8<----8<----8<----8<----8<--

After logging in:

--8<----8<----8<----8<----8<----8<----8<----8<----8<----8<----8<----8<----8<--
rut# fdisk -i /dev/ld0c                                                         
                                                              
fdisk: cannot opendisk /dev/ld0cc: No such file or directory
rut# fdisk -i /dev/ld0  
fdisk: cannot opendisk /dev/ld0c: No such file or directory
rut# fdisk -i /dev/rld0
fdisk: cannot opendisk /dev/rld0c: No such file or directory
rut# cd /dev/ ; ./MAKEDEV ld0

rut# ls -l /dev/rld*                                                            
                                                            
crw-r-----  1 root  operator  92, 0 Feb 27 13:37 /dev/rld0a
crw-r-----  1 root  operator  92, 1 Feb 27 13:37 /dev/rld0b
crw-r-----  1 root  operator  92, 2 Feb 27 13:37 /dev/rld0c
crw-r-----  1 root  operator  92, 3 Feb 27 13:37 /dev/rld0d
crw-r-----  1 root  operator  92, 4 Feb 27 13:37 /dev/rld0e
crw-r-----  1 root  operator  92, 5 Feb 27 13:37 /dev/rld0f
crw-r-----  1 root  operator  92, 6 Feb 27 13:37 /dev/rld0g
crw-r-----  1 root  operator  92, 7 Feb 27 13:37 /dev/rld0h
rut# ls -l /dev/ld*    
brw-r-----  1 root  operator  92, 0 Feb 27 13:37 /dev/ld0a
brw-r-----  1 root  operator  92, 1 Feb 27 13:37 /dev/ld0b
brw-r-----  1 root  operator  92, 2 Feb 27 13:37 /dev/ld0c
brw-r-----  1 root  operator  92, 3 Feb 27 13:37 /dev/ld0d
brw-r-----  1 root  operator  92, 4 Feb 27 13:37 /dev/ld0e
brw-r-----  1 root  operator  92, 5 Feb 27 13:37 /dev/ld0f
brw-r-----  1 root  operator  92, 6 Feb 27 13:37 /dev/ld0g
brw-r-----  1 root  operator  92, 7 Feb 27 13:37 /dev/ld0h
rut# fdisk -i /dev/rld0 
fdisk: Can't read primary partition table: Input/output error
fdisk: Can't read primary GPT header: Input/output error
fdisk: Can't read secondary GPT header: Input/output error
fdisk: Cannot determine the number of heads

We haven't written the MBR back to disk yet.  This is your last chance.
Should we write new partition table? [n] y
fdisk: Can't write fdisk partition table: Input/output error
rut# fdisk -i /dev/ld0  
fdisk: Can't read primary partition table: Input/output error
fdisk: Can't read primary GPT header: Input/output error
fdisk: Can't read secondary GPT header: Input/output error
fdisk: Cannot determine the number of heads

We haven't written the MBR back to disk yet.  This is your last chance.
Should we write new partition table? [n] y
fdisk: Can't write fdisk partition table: Input/output error
--8<----8<----8<----8<----8<----8<----8<----8<----8<----8<----8<----8<----8<--

On console I see following errors:
--8<----8<----8<----8<----8<----8<----8<----8<----8<----8<----8<----8<----8<--

ld0c: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0)
ld0c: error reading fsbn 1 (ld0 bn 1; cn 0 tn 0 sn 1)
ld0c: error reading fsbn 7862271 (ld0 bn 7862271; cn 1949 tn 61 sn 60)
ld0c: error writing fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0)

ld0c: error reading fsbn 6 (ld0 bn 6; cn 0 tn 0 sn 6)
ld0: filecore boot block I/O error
ld0c: error reading fsbn 0 of 0-3 (ld0 bn 0; cn 0 tn 0 sn 0)
ld0c: error reading fsbn 0 of 0-3 (ld0 bn 0; cn 0 tn 0 sn 0)
ld0c: error reading fsbn 7862268 of 7862268-7862271 (ld0 bn 7862268; cn 1949 
tn 61 sn 57)
ld0c: error reading fsbn 0 of 0-3 (ld0 bn 0; cn 0 tn 0 sn 0)

--8<----8<----8<----8<----8<----8<----8<----8<----8<----8<----8<----8<----8<--

Am I missing something?
-- 
"Omnes homines natura scire desiderant"
                                           Aristotelis
Prev by Date: Re: cross-compilation from amd64 to evbarm fails (5.99.46)
Next by Date: Re: [guruplug] mvgbe1 no PHY found
Previous by Thread: cross-compilation from amd64 to evbarm fails (5.99.46)
Next by Thread: undefined reference to `_splraise'
Indexes:
Home | Main Index | Thread Index | Old Index