NetBSD and TS-7200

["Patrick Collins" <normalbloke%gmail.com@localhost>]

Hello,

I would really like to get NetBSD running on my TS-7200 but am not
having any success with any of the versions I have tried. I am finding
all of the varios installation, binary, kernel, gzip, etc files very
confusing. My preference would be to get 4.0.1 running but I have not
been able to so far. My latest attempt was with 3.1.1 and I received
the following error. Does anyone on this list have any experience that
could help me get started here.

Thanks.

Patrick Collins
+61 419 712 581

>> TS-BOOTROM, Rev 1.08 - built 10:44:37, May 26 2006
>> Copyright (C) 2006, Technologic Systems
>> TS-7200: Rev >E1 CPU, Rev C PLD, 32MB SDRAM, options ( MAX197-ADC )
>> TS-5620: detected, battery OK, time ( 13:33:16, Nov 27 2008 )

+Ethernet eth0: MAC address 00:d0:69:41:05:e3
IP: 10.0.3.2/255.255.255.0, Gateway: 10.0.3.1
Default server: 10.0.2.7

RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version current-TS_5 - built 11:24:54, Jun  7 2006

Platform: TS-7200 Board (ARM920T) Rev A
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.

RAM: 0x00000000-0x02000000, [0x00044f88-0x01fdd000] available
FLASH: 0x60000000 - 0x60800000, 64 blocks of 0x00020000 bytes each.
== Executing boot script in 2.000 seconds - enter ^C to abort
RedBoot> load -r -b 0x00200000 gzimg_TS7200_wd0_flash_0x60660000
Using default protocol (TFTP)
Raw file loaded 0x00200000-0x00354b73, assumed entry at 0x00200000
RedBoot>
RedBoot>
RedBoot> fis list
Name              FLASH addr  Mem addr    Length      Entry point
(reserved)        0x60000000  0x60000000  0x00620000  0x00000000
RedBoot           0x60620000  0x60620000  0x00040000  0x00000000
netbsd.gz         0x60660000  0x60660000  0x00160000  0x00200000
RedBoot config    0x607C0000  0x607C0000  0x00001000  0x00000000
FIS directory     0x607E0000  0x607E0000  0x00020000  0x00000000
RedBoot> fis delete netbsd.gz
Delete image 'netbsd.gz' - continue (y/n)? y
... Erase from 0x60660000-0x607c0000: ...........
... Erase from 0x607e0000-0x60800000: .
... Program from 0x01fe0000-0x02000000 at 0x607e0000: .
RedBoot> fis create -b 0x00200000 -f 0x60660000 -l 0x00160000 netbsd.gz
... Erase from 0x60660000-0x607c0000: ...........
... Program from 0x00200000-0x00360000 at 0x60660000: ...........
... Erase from 0x607e0000-0x60800000: .
... Program from 0x01fe0000-0x02000000 at 0x607e0000: .
RedBoot> g 0x60660000

>> NetBSD/TS7200 Gzip Boot, Revision 1.2
>> (joff@construct, Fri Mar 16 14:36:07 MST 2007)
>> Load address: 0x200000
Uncompressing image...done.
Jumping to image @ 0x200000...
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

pmap_postinit: Allocated 35 static L1 descriptor tables
NetBSD 3.0_STABLE (TS7200) #3: Thu Aug  3 10:39:31 MST 2006
        
joff@construct:/home/joff/NetBSD-3/obj/home/joff/NetBSD-3/pristine-src/sys/arch/evbarm/compile/TS7200
total memory = 32768 KB
avail memory = 28196 KB
mainbus0 (root)
cpu0 at mainbus0: ARM920T rev 0 (ARM9TDMI core)
cpu0: DC enabled IC enabled WB enabled EABT
cpu0: 16KB/32B 64-way Instruction cache
cpu0: 16KB/32B 64-way write-back-locking-A Data cache
epsoc0 at mainbus0: Cirrus Logic EP93xx SoC rev >E1
epsoc0: fclk 200.03 Mhz hclk 100.01 Mhz pclk 50.01 Mhz
ohci0 at epsoc0 addr 0x80020000-0x80020fff intr 56
epclk0 at epsoc0 addr 0x80810000-0x8081008f intr 35
epe0 at epsoc0 addr 0x80010000-0x8001ffff intr 39
epe0: MAC address 00:d0:69:41:05:e3
ukphy0 at epe0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0010a1, model 0x0021, rev. 9
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
epcom0 at epsoc0 addr 0x808c0000-0x808c0fff intr 52
epcom0: console
epcom1 at epsoc0 addr 0x808d0000-0x808d0fff intr 54
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Cirrus Logic OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
tspld0 at mainbus0: Technologic Systems TS-7200 rev C, features 0x1<MAX197-ADC>
tspld0: jumpers 0x3<JP2,JP3>
wdc0 at tspld0
atabus0 at wdc0 channel 0
tsrtc0 at tspld0: mc146818 compatible time-of-day clock
tslcd0 at tspld0
tslcd0: LCD not responding or unconnected
wsdisplay0 at tslcd0 kbdmux 1
wsmux1: connecting to wsdisplay0
tskp0 at tspld0: 4x4 matrix keypad, polling at 64 hz
wskbd0 at tskp0 mux 1
wskbd0: connecting to wsdisplay0
tssd0 at tspld0: TS-SDCORE SD flash card core
isa0 at tspld0: PC/104 expansion bus
wd0 at atabus0 drive 0: <SanDisk SDCFH-1024>
wd0: drive supports 4-sector PIO transfers, LBA addressing
wd0: 977 MB, 1986 cyl, 16 head, 63 sec, 512 bytes/sect x 2001888 sectors
wd0: drive supports PIO mode 4, DMA mode 2
boot device: <unknown>
root on wd0a dumps on wd0b
WARNING: clock gained 860 days
WARNING: CHECK AND RESET THE DATE!
Process (pid 1) got signal 12
Process (pid 1) got signal 12
panic: init died (signal 0, exit 1)
Stopped in pid 1.1 (init) at    0xc038edf0:     mov     r15, r14
db>