AW: Xorg for amiga

["Harald Meinzer" <funlife%freenet.de@localhost>]

Hi Radoslaw,

>Both Permedia 2 and Voodoo 3 will need P5PB_CONSOLE kernel option, which is
disabled by default (see the >WSCONS kernel config).

I am actually testing CVPPC with genfb but have no success getting a screen
for now. Kernel is booting and I am able to connect via telnet to my Amiga
3000 using cyberstormPPC/CybervisionPPC

This is the last dmesg output, maybe it helps

-----------cut-------------
# /sbin/dmesg

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.99.21 (amiga) #1: Thu Nov 12 18:25:20 CET 2015
        root%PC.fritz.box@localhost:/usr/src/objamiga/sys/arch/amiga/compile/amiga
total memory = 127 MB
avail memory = 120 MB
Amiga 3000 (68060 rev.1 CPU/MMU/FPU)
memory segment 0 at 08000000 size 07f80000
memory segment 1 at 07000000 size 01000000
memory segment 2 at 40000000 size 10000000
memory segment 3 at 00000000 size 00200000
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root)
clock0 at mainbus0: CIA B system hz 100 hardware hz 715909
timecounter: Timecounter "CIA B" frequency 715909 Hz quality 100
Calibrating delay loop... 21/1024 us
a34kbbc0 at mainbus0
ser0 at mainbus0: input fifo 512 output fifo 32
par0 at mainbus0
kbd0 at mainbus0: CIA A type Amiga
wskbd0 at kbd0: console keyboard
ms0 at mainbus0
wsmouse0 at ms0 mux 0
wsmouse1 at ms0 mux 0
amidisplaycc0 at mainbus0: Amiga custom chip graphics  (console)
wsdisplay0 at amidisplaycc0 kbdmux 1: console (default, vt100 emulation),
using wskbd0
wsmux1: connecting to wsdisplay0
fdc0 at mainbus0: dmabuf pa 0x1db670: dmabuf ka 0x6f5670
fd0 at fdc0 unit 0: 3.5dd 80 cyl, 2 head, 11 sec [9 sec], 512 bytes/sec
ahsc0 at mainbus0
scsibus0 at ahsc0: 8 targets, 8 luns per target
aucc0 at mainbus0
audio0 at aucc0: half duplex, playback, capture
zbus0 at mainbus0: i/o size 0x01400000
toccata0 at zbus0 pa 0xe90000 man/pro 18260/12: ad1848
audio1 at toccata0: half duplex, playback, capture
xsh0 at zbus0 pa 0xea0000 man/pro 4626/100: Individual Computers X-Surf 100
ne0 at xsh0
ne0: Ethernet address 28:cd:4c:ff:fb:e4
ukphy0 at ne0 phy 16: OUI 0x007063, model 0x0004, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xsurf0 at zbus0 pa 0xeb0000 man/pro 4626/23: Individual Computers X-Surf
gencp0 at xsurf0: generic clockport pa 0xebc000
clockport0 at gencp0
gencp1 at xsurf0: generic clockport pa 0xeba001
clockport1 at gencp1
ne1 at xsurf0
ne1: Ethernet address 52:54:40:28:a5:2b
ne1: 10base2, 10baseT, 10baseT-FDX, auto, default [0x00 0x30] auto
wdc1 at xsurf0
atabus0 at wdc1 channel 0
atabus1 at wdc1 channel 1
p5bus0 at zbus0 pa 0xf01060 man/pro 8512/100: Phase5 PowerUP on-board bus
p5bus0: CyberStorm PPC 604e (sn EC50136)
cbiiisc0 at p5bus0: CyberStorm PPC/Mk-III SCSI host adapter
cbiiisc0: siopng type 770 id 16 reset V1
scsibus1 at cbiiisc0: 16 targets, 8 luns per target
p5pb0 at p5bus0: Phase5 CVPPC/BVPPC PCI bridge
pci0 at p5pb0 bus 0
pci0: i/o space, memory space enabled
genfb0 at pci0 dev 0 function 0: vendor 104c product 3d07 (rev. 0x01)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
cbiiisc0: target 1 now wide 1
cbiiisc0: target 1 now synchronous, period=50ns, offset=14
sd0 at scsibus1 target 1 lun 0: <ATA, OCZ-AGIL LITY3, 2.11> disk fixed
sd0: 111 GB, 58145 cyl, 64 head, 63 sec, 512 bytes/sect x 234441648 sectors
4 views configured
Kernelized RAIDframe activated
root on sd0a dumps on sd0b
root file system type: ffs
kern.module.path=/stand/amiga/7.99.21/modules
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
#

-----------cut--------------

ps -a says:

# # ps -a

PID TTY   STAT    TIME COMMAND
538 ttyp0 O+   0:00.09 ps -a
581 ttyp0 I    0:00.17 -sh
595 ttyp0 Is   0:08.55 login
625 ttyp0 S    0:08.84 sh
621 ttyE0 Is+  0:00.17 /usr/libexec/getty Pc ttyE0
618 ttyE1 Is+  0:00.15 /usr/libexec/getty Pc ttyE1
624 ttyE2 Is+  0:00.12 /usr/libexec/getty Pc ttyE2
604 ttyE3 Is+  0:00.12 /usr/libexec/getty Pc ttyE3
# #

Maybe you have an idea ?

Kind regard

Harald