Re: GVP IO and other problems

["Brugger Simon" <bruggers%student.ethz.ch@localhost>]

----- Original Message -----
From: "Ignatios Souvatzis" <is%beverly.kleinbus.org@localhost>
To: <port-amiga%netbsd.org@localhost>
Cc: "Brugger Simon" <bruggers%student.ethz.ch@localhost>
Sent: Thursday, December 28, 2000 9:54 PM
Subject: Re: GVP IO and other problems


> On Thu, Dec 21, 2000 at 10:15:18PM +0100, Ignatios Souvatzis wrote:
> > On Thu, Dec 21, 2000 at 10:05:41PM +0100, Ignatios Souvatzis wrote:
> > > A first try to create the reconstructed gvp lpt/com stuff is at
> > >
> > > ftp://ftp.netbsd.org/pub/NetBSD/arch/amiga/misc/1.5+gvpio/
> > >
> > > You'll find a source diff file (apply while in /sys/arch/amiga/) as
well as
> > > a kernel; both otherwise 1.5ish.
> >
> > I forgot: if it works, or if it doesn't, I want the kernel startup
messages.
> > Take a photo and scan, if you can't get at them otherwise.
>
> On Thu, Dec 28, 2000 at 05:47:28PM +0100, Brugger Simon wrote:
>
> > Where are the files gvpiovar.h and com_gvpio.c to be found ?
>
> In the same directory; I've uploaded them a few minutes ago. Sorry for the
> inconvenience.
>
> Regards,
> -is
>

Unfortunatly, something does not work. Each time i compile a new kernel with
the gvpio options, the kernel doesn't recognize the gvpscsi hardware at the
boot time. Here is a "snapshot" of the kernel messages at the boot-time :

pmap_init: 0: 01266000-04ffe000 ( 64585728)
Maxproc 148, mem_size 64MB: allocating 6KPT pages
 root@amiga:/usr/src/sys/arch/amiga/compile/AM2
Amiga 500/2000 (m68040 CPU/MMU/FPU)
total memory=65536 KB
avail memory=59144 KB
using 422 buffers containing 3376 KB of memory
memory segment 0 at 01000000 size 04000000
memory segment 1 at 00000000 size 00100000
memory segment 2 at 01144000 size 00008000
mainbus0 (root)
clock0 at mainbus0:CIA B system hz 100 hardware hz 7093790
calibrating delay loop ...
diff 1017 us, new divisor 95/1024 us
diff 1015 us, new divisor 95/1024 us
diff 1015 us, new divisor 95/1024 us
a2kbbc0 at mainbus0
ser0 at mainbus0: input fifo 512 output fifo 32
par0 at mainbus0
kpd0 at mainbus0: CIA A type Amiga
ms0 at mainbus0
grfcc0 at mainbus0
grf0 at grfcc0: width 640 height 400 color 4
ite0 at grf0: rows 0 cols 0 repeat at (30/100)s next at (10/100)s has
keyboard
fdc0 at mainbus0: dmabuf pa 0xe5258: dmabuf ka 0x859f258
fd0 at fdc0 unit0: 3,5dd 80 cyl, 2 head, 11 sec [9sec], 512 byte/sec
aucc0 at mainbus0
audio0 at aucc0: half duplex
zbus0 at mainbus0: i/o size 0x00700000
gvpbus0 at zbus0 pa 0xe90000 man/pro 2017/11: sub prod 37 flags 40
gvpio0 at gvpbus0
com0 at gvpio0 port 0x00b0 gvpio_com_intr: ns16550a, working fifo
com1 at gvpio0 port 0x0130 gvpio_com_intr: ns16550a, working fifo
lpt0 at gvpio0 port 0x01b0 ipl2
gvpio: raising amiga_serialspt from 0x2400 to 0x2600
gio at zbus0 pa 0xe90000 man/pro 2017/255 not configured
ne0 at zbus0 pa 0xea0000 man/pro 2167/202
ne0: 10base2, 10baseT, 10base T-FDx, auto, default [0x18 8x10] auto
ne0: Ethernet address 00:60:30:60:48:fc
grfcl0 at zbus0 pa 0x200000 man/pro 2167/11
grf3 at grfcl0: width 640 height 480 color 16
ite3 at grf3: rows 60 cols 80 repeat at (30/100)s next at (10/100)s has
keyboard
grfcl:2MB Picasso II (with CL-GD5426) being used
grfcl1 at zbus0 pa 0xeb0000 man/pro 2167/12
ite at grfcl1: not configured
board at zbus0: pa 0x600000 man/pro 8215/8 not configured
board at zbus0: pa 0x400000 man/pro 8215/7 not configured
4 views configured
root device:

Hope it may help.

Regards,

Brugger Simon