/dev/grf3 problems, still no clue

[Michael Boehnisch <billy%psycho.uni-paderborn.de@localhost>]

Hi!

[1.4.0BETA X problems/CL driver]

I fiddled around with the flags settings of one of the modes
but to no avail...  This is the grfmodes file I used for testing,
I tried all combinations of +/- hsync/vsync and that did not
help, nor any unusal warning messages are produced by grfconfig.

root@musashi:~>grfconfig -r /dev/grf3     --- gives the dump:

1 15000000 320 240 8 320 360 376 416 240 245 246 260 default
2 31000000 640 480 8 640 688 768 832 480 489 492 520 default
3 53000000 800 600 8 800 832 976 1016 600 610 620 640 default
4 85000000 1024 768 8 1024 1072 1184 1336 768 772 777 800 +hsync +vsync
5 85000000 1120 832 8 1120 1152 1216 1440 832 867 870 910 default
6 85000000 1152 900 8 1152 1184 1240 1496 900 905 932 937 default
7 83000000 1280 1024 8 1280 1320 1416 1600 1024 1056 1068 1150 interlace
8 78000000 1600 1200 8 1600 1664 1800 2056 1200 1202 1210 1264 interlace
c 25200000 640 480 8 640 752 792 800 481 490 498 522 default

I believe it's an driver bug, my Eizo 9080i used to sync fine
with any sync combination and with timings that were driven
more to the edge than these default values (I took them from
the INSTALL.X11 file from the 1.3.3 distribution).

Regards,

    Michael Boehnisch