Port-amiga archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

1.3.2 Install Problems



On Mon, 13 Jul 1998 15:01:43 +0200,
Bernd Sieker <bernd%techfak.uni-bielefeld.de@localhost> wrote about Re: 1.3.2
Install:
> During install, enter "none" as the dump partition.
>
> >
> > >Last I'm prompted for the file system. I just hit return to
> > >use the default "generic" although I've tried NFS and others just to
>
> "generic" tries to figure out the fs type automatically, but in almost
> all cases this will be ffs.
>
> > >see what would happen. In any case, the installation never goes
> > >anywhere.
>
> Double check the DOS types in HDToolBox and that the reserved blocks
> at the beginning and end are both 0 and copy the miniroot again.

I still am going nowhere with my NetBSD install. All HD parameters
appear fine. This is what happens now:

root device (default sd3a): sd3b
dump device (default sd3b): none
file system (default generic):
root on sd3b
root file system type: ffs
First bad
/: bad dir ino 4 at offset 0: mangled entry
panic: bad dir
stopped at 0xf2a0c:   unlk  a6

This is after entering the swap partition as the root device. All HD
parameters appear fine. Is there a problem with the minroot
filesystem?

Thanks,
Ola

--
/**
/** Ola Olsson
/** oeolsson%tmisnet.com@localhost
/** http://www.tmisnet.com/~oeolsson/
/** --naive programmer--
/**




Home | Main Index | Thread Index | Old Index