Port-amiga archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: SCSI trouble with 1.3.2



Ingolf Koch wrote:
> 
> Laurent Papier wrote:
> >
> > Hi,
> > I'm using NetBSD 1.3 for some times.
> > I have tried to upgrade to 1.3.2 version with no luck.
> > I copy the filesys on the swap partition and try to boot netbsd in
> > single user mode.
> > The kernel crash while scanning the SCSI chain, just before my last
> > drive (works with 1.3 kernel).
> > I got the following error message:
> > bztzsc0 at line 1215:unexpected MESSAGE OUT phase
> > panic:kvtop:zero page frame
> > Stopped at 0xf2a0c: unlk a6
> >
> > My config: A2000/Blizzard 2040/32Mo/PiccasoII
> 
> Does the blizzard card have an ncr53c9x chip? If so, this
> is a known bug in 1.3.2. Try the following:
> 
> Get the current src/sys/dev/ic/ncr53c9x* files and replace
> the 1.3.2 ones in your source tree (you hopefully have the
> sources). Rebuild your kernel.
> 
> I had the same problems with 1.3.2 and cyber scsi II. Using
> the current sources for the ncr chip seems to fix this.

I don't known exactly if it's a ncr53c9x chip.
Is it the same as a FAS16 ? I will check that. thanks.
Could I use a 1.3.2 kernel and the 1.3 bin-dist ?

Laurent



Home | Main Index | Thread Index | Old Index