Strange (to me) messages

[Patryk Logiewa <silverdr%inet.com.pl@localhost>]

Hello everyone,

I was using NetBSD1.1 for a while without any problems.
Recently I changed the harddrives so I decided to install the new NetBSD V1.2
on the new drives. After doing the proper installation the system seems to
boot
properly but I am struck with some strange (to me) messages all the time.



I include the whole recognized configuration and few lines of the messages.

Any help highly appreciated!!!



/netbsd: NetBSD 1.2 (GENERIC) #0: Thu Sep 26 10:27:49 EDT 1996
/netbsd:    
chopps%water.emich.edu@localhost:/exp/NetBSD/NetBSD-1-2/src/sys/arch/amiga/compile/GENERIC
/netbsd: Amiga 4000 (m68040 CPU/MMU/FPU)
/netbsd: real  mem = 54525952 (6656 pages)
/netbsd: avail mem = 49627136 (6058 pages)
/netbsd: using 345 buffers containing 2826240 bytes of memory
/netbsd: memory segment 0 at 8000000 size 3400000
/netbsd: memory segment 1 at 0 size 200000
/netbsd: mainbus0 (root)
/netbsd: clock0 at mainbus0: CIA B system hz 100 hardware hz 709379
/netbsd: ser0 at mainbus0: input fifo 512 output fifo 32
/netbsd: par0 at mainbus0
/netbsd: kbd0 at mainbus0: CIA A type Amiga
/netbsd: ms0 at mainbus0
/netbsd: ms1 at mainbus0
/netbsd: grfcc0 at mainbus0
/netbsd: grf0 at grfcc0: width 640 height 400 colors 4
/netbsd: ite0 at grf0: rows 0 cols 0 repeat at (30/100)s next at (10/100)s has
keyboard
/netbsd: fdc0 at mainbus0: dmabuf pa 0x1e3690: dmabuf ka 0x2d5f690
/netbsd: fd0 at fdc0 unit 0: 3.5dd 80 cyl, 2 head, 11 sec [9 sec], 512
bytes/sec
/netbsd: idesc0 at mainbus0
/netbsd: scsibus0 at idesc0
/netbsd: sd0 at scsibus0 targ 0 lun 0: <QUANTUM, FIREBALL1280A, A63.> SCSI2
0/direct fixed
/netbsd: sd0: 1222MB, 2484 cyl, 16 head, 63 sec, 512 bytes/sec
/netbsd: sd1 at scsibus0 targ 1 lun 0: <WDC AC32, 500H, 24.0> SCSI2 0/direct
fixed
/netbsd: sd1: 2441MB, 4960 cyl, 16 head, 63 sec, 512 bytes/sec
/netbsd: zbus0 at mainbus0: i/o size 0x04080000
/netbsd: wesc0 at zbus0 rom 0x40000000 man/pro 2203/19
/netbsd: wesc0: siop id 7 reset V2
/netbsd: scsibus1 at wesc0
/netbsd: grfcv0 at zbus0 rom 0x44000000 man/pro 8512/34
/netbsd: grf5 at grfcv0: width 640 height 480 colors 16
/netbsd: ite5 at grf5: rows 60 cols 80 repeat at (30/100)s next at (10/100)s
has keyboard
/netbsd: grfcv: CyberVision64 with 4MB being used
/netbsd: empsc0 at zbus0 rom 0xe90000 man/pro 2171/32
/netbsd: empsc0: sci id 7
/netbsd: scsibus2 at empsc0
/netbsd: ae0 at zbus0 rom 0xea0000 man/pro 2167/201
/netbsd: ae0: hardware address 00:60:30:00:16:03 32K  chip-revision: B2
/netbsd: 10 views configured
/netbsd: ok.
savecore: /netbsd: kvm_dump_mkheader: 
lpd[77]: restarted
/netbsd: arpresolve: can't allocate llinfo
init: kernel security level changed from 0 to 1
/netbsd: arpresolve: can't allocate llinfo
last message repeated 3 times
login: ROOT LOGIN (root) ON ttye5
/netbsd: arpresolve: can't allocate llinfo
last message repeated 5 times
last message repeated 13 times
inetd[80]: pmap_set: 100001 1 17 1024: Address already in use
/netbsd: arpresolve: can't allocate llinfo
last message repeated 7 times
last message repeated 16 times
inetd[80]: pmap_set: 100001 2 17 1024: Address already in use
/netbsd: arpresolve: can't allocate llinfo
last message repeated 7 times
last message repeated 16 times
inetd[80]: pmap_set: 100001 3 17 1024: Address already in use
/netbsd: arpresolve: can't allocate llinfo
last message repeated 7 times
last message repeated 8 times


TNX in advance!



-- 


      / /
     / /
    / /  silverdr%inet.com.pl@localhost
\ \/ /
 \/\/

--