Re: HP DL380 Gen8 / G8 Boot Log

To: "Brian A. Seklecki" <lavalamp%spiritual-machines.org@localhost>
Subject: Re: HP DL380 Gen8 / G8 Boot Log
From: Chavdar Ivanov <ci4ic4%gmail.com@localhost>
Date: Fri, 13 Jul 2012 09:31:33 +0100
On 12 July 2012 18:21, Brian A. Seklecki
<lavalamp%spiritual-machines.org@localhost> wrote:
>
> FYI the latest amd64/-current HEAD build from today doesn't seem to support
> much of HP latest Gen8 hardware.

Following this is is the dmesg of another bit of new HP hardware, a
Z420 workstation, which, even if showing enough 'not configured'
lines, works fine. I *think* the CPU is E5-1660 (it doesn't show on
any system, I suspect it is an earlier ES).

>
> Additionally, it seems to lock initializing the EHCI controller.

I have some problems with the USB as well, but only with the mouse and
the keyboard (when attached to certain ports, I get a message that the
port has been disabled due to error).

>
> I'll try to get an lspci/dmidecode from a booted RHEL6 system for reference.
> Pastebin is blocked at work, or dmesgd, but I don't want to post in
> incomplete/non-booting log.
>
> ~BAS
>
> -----------------
>
>
> </>hpiLO-> vsp
>
> Virtual Serial Port Active: COM2
>
> Starting virtual serial port.
> Press 'ESC (' to return to the CLI Session.
>
>>> NetBSD/x86 BIOS Boot, Revision 5.9 (from NetBSD 6.99.8)
>>> Memory: 602/3144704 k
>>
>> boot
>
> 12435720+620392+632472 [842136+558319]=0xf65680
> Loading /stand/amd64/6.99.8/modules/cd9660/cd9660.kmod
> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
>     2006, 2007, 2008, 2009, 2010, 2011, 2012
>     The NetBSD Foundation, Inc.  All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>     The Regents of the University of California.  All rights reserved.
>
> NetBSD 6.99.8 (GENERIC) #0: Wed Jul 11 10:45:05 UTC 2012
>
> builds%b6.netbsd.org@localhost:/home/builds/ab/HEAD/amd64/201207110830Z-obj/home/builds/ab/HEAD/src/sys/arch/amd64/compile/GENERIC
> total memory = 16349 MB
> avail memory = 15859 MB
> mainbus0 (root)
> ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16
> (20110623/tbfadt-638)
> ACPI Warning: Invalid length for Pm2ControlBlock: 32, using default 8
> (20110623/tbfadt-638)
> cpu0 at mainbus0 apid 0: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id
> 0x206d7
> cpu1 at mainbus0 apid 2: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id
> 0x206d7
> cpu2 at mainbus0 apid 4: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id
> 0x206d7
> cpu3 at mainbus0 apid 6: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id
> 0x206d7
> cpu4 at mainbus0 apid 1: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id
> 0x206d7
> cpu5 at mainbus0 apid 3: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id
> 0x206d7
> cpu6 at mainbus0 apid 5: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id
> 0x206d7
> cpu7 at mainbus0 apid 7: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id
> 0x206d7
> ioapic0 at mainbus0 apid 8
> ioapic1 at mainbus0 apid 0
> acpi0 at mainbus0: Intel ACPICA 20110623
> hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
> MOMB (PNP0C02) at acpi0 not configured
> MOMB (PNP0C02) at acpi0 not configured
> MI0 (IPI0001) at acpi0 not configured
> attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
> pcppi1 at acpi0 (BEEP, PNP0800): io 0x61
> midi0 at pcppi1: PC speaker
> sysbeep0 at pcppi1
> COMA (PNP0501) at acpi0 not configured
> pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
> pckbc2 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
> PMI0 (ACPI000D) at acpi0 not configured
> acpitz0 at acpi0 (THM0): cpu0
> attimer1: attached to pcppi1
> pckbd0 at pckbc1 (kbd slot)
> pckbc1: using irq 1 for kbd slot
> wskbd0 at pckbd0 mux 1
> pms0 at pckbc1 (aux slot)
> pckbc1: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> ipmi0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1
> pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x3c00 (rev. 0x07)
> ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x3c02 (rev. 0x07)
> ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex>
> pci1 at ppb0 bus 7
> ppb1 at pci0 dev 1 function 1: vendor 0x8086 product 0x3c03 (rev. 0x07)
> ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex>
> pci2 at ppb1 bus 19
> ppb2 at pci0 dev 2 function 0: vendor 0x8086 product 0x3c04 (rev. 0x07)
> ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex>
> pci3 at ppb2 bus 3
> vendor 0x14e4 product 0x1657 (ethernet network, revision 0x01) at pci3 dev 0
> function 0 not configured
> vendor 0x14e4 product 0x1657 (ethernet network, revision 0x01) at pci3 dev 0
> function 1 not configured
> vendor 0x14e4 product 0x1657 (ethernet network, revision 0x01) at pci3 dev 0
> function 2 not configured
> vendor 0x14e4 product 0x1657 (ethernet network, revision 0x01) at pci3 dev 0
> function 3 not configured
> ppb3 at pci0 dev 2 function 1: vendor 0x8086 product 0x3c05 (rev. 0x07)
> ppb3: PCI Express 2.0 <Root Port of PCI-E Root Complex>
> pci4 at ppb3 bus 20
> ppb4 at pci0 dev 2 function 2: vendor 0x8086 product 0x3c06 (rev. 0x07)
> ppb4: PCI Express 2.0 <Root Port of PCI-E Root Complex>
> pci5 at ppb4 bus 2
> ciss has not been converted to device_t
> ciss0 at pci5 dev 0 function 0: HP Smart Array 12
> ciss0: interrupting at ioapic1 pin 10
> ciss0: 2 LDs, HW rev 1, FW 1.28/1.28
> scsibus0 at ciss0: 2 targets, 1 lun per target
> ppb5 at pci0 dev 2 function 3: vendor 0x8086 product 0x3c07 (rev. 0x07)
> ppb5: PCI Express 2.0 <Root Port of PCI-E Root Complex>
> pci6 at ppb5 bus 21
> ppb6 at pci0 dev 3 function 0: vendor 0x8086 product 0x3c08 (rev. 0x07)
> ppb6: PCI Express 2.0 <Root Port of PCI-E Root Complex>
> pci7 at ppb6 bus 4
> ppb7 at pci0 dev 3 function 1: vendor 0x8086 product 0x3c09 (rev. 0x07)
> ppb7: PCI Express 2.0 <Root Port of PCI-E Root Complex>
> pci8 at ppb7 bus 22
> ppb8 at pci0 dev 3 function 2: vendor 0x8086 product 0x3c0a (rev. 0x07)
> ppb8: PCI Express 2.0 <Root Port of PCI-E Root Complex>
> pci9 at ppb8 bus 23
> ppb9 at pci0 dev 3 function 3: vendor 0x8086 product 0x3c0b (rev. 0x07)
> ppb9: PCI Express 2.0 <Root Port of PCI-E Root Complex>
> pci10 at ppb9 bus 24
> vendor 0x8086 product 0x3c20 (miscellaneous system, revision 0x07) at pci0
> dev 4 function 0 not configured
> vendor 0x8086 product 0x3c21 (miscellaneous system, revision 0x07) at pci0
> dev 4 function 1 not configured
> vendor 0x8086 product 0x3c22 (miscellaneous system, revision 0x07) at pci0
> dev 4 function 2 not configured
> vendor 0x8086 product 0x3c23 (miscellaneous system, revision 0x07) at pci0
> dev 4 function 3 not configured
> vendor 0x8086 product 0x3c24 (miscellaneous system, revision 0x07) at pci0
> dev 4 function 4 not configured
> vendor 0x8086 product 0x3c25 (miscellaneous system, revision 0x07) at pci0
> dev 4 function 5 not configured
> vendor 0x8086 product 0x3c26 (miscellaneous system, revision 0x07) at pci0
> dev 4 function 6 not configured
> vendor 0x8086 product 0x3c27 (miscellaneous system, revision 0x07) at pci0
> dev 4 function 7 not configured
> vendor 0x8086 product 0x3c28 (miscellaneous system, revision 0x07) at pci0
> dev 5 function 0 not configured
> vendor 0x8086 product 0x3c2a (miscellaneous system, revision 0x07) at pci0
> dev 5 function 2 not configured
> vendor 0x8086 product 0x3c2c (interrupt system, interface 0x20, revision
> 0x07) at pci0 dev 5 function 4 not configured
> ppb10 at pci0 dev 17 function 0: vendor 0x8086 product 0x1d3e (rev. 0x05)
> ppb10: PCI Express 2.0 <Root Port of PCI-E Root Complex>
> pci11 at ppb10 bus 26
> ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x1d2d (rev. 0x05)
> ehci0: interrupting at ioapic0 pin 21
>
>
>
>>> NetBSD/x86 BIOS Boot, Revision 5.9 (from NetBSD 6.99.8)
>>> Memory: 602/3144704 k
>>
>> boot -v
>
> booting cd0a:netbsd (howto 0x20000)
> 12435720-
>>
>> boot -v
>
> booting cd0a:netbsd (howto 0x20000)
> 12435720+620392+632472 [842136+558319]=0xf65680
> Loading /stand/amd64/6.99.8/modules/cd9660/cd9660.kmod
> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
>     2006, 2007, 2008, 2009, 2010, 2011, 2012
>     The NetBSD Foundation, Inc.  All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>     The Regents of the University of California.  All rights reserved.
>
> NetBSD 6.99.8 (GENERIC) #0: Wed Jul 11 10:45:05 UTC 2012
>
> builds%b6.netbsd.org@localhost:/home/builds/ab/HEAD/amd64/201207110830Z-obj/home/builds/ab/HEAD/src/sys/arch/amd64/compile/GENERIC
> total memory = 16349 MB
> avail memory = 15859 MB
> timecounter: Timecounters tick every 10.000 msec
> timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
> HP ProLiant DL380p Gen8
> mainbus0 (root)
> ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16
> (20110623/tbfadt-638)
> ACPI Warning: Invalid length for Pm2ControlBlock: 32, using default 8
> (20110623/tbfadt-638)
> cpu0 at mainbus0 apid 0timecounter: Timecounter "lapic" frequency 99801801
> Hz quality -100
> : Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id 0x206d7
> cpu1 at mainbus0 apid 2: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id
> 0x206d7
> cpu2 at mainbus0 apid 4: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id
> 0x206d7
> cpu3 at mainbus0 apid 6: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id
> 0x206d7
> cpu4 at mainbus0 apid 1: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id
> 0x206d7
> cpu5 at mainbus0 apid 3: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id
> 0x206d7
> cpu6 at mainbus0 apid 5: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id
> 0x206d7
> cpu7 at mainbus0 apid 7: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id
> 0x206d7
> ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 20, 24 pins
> ioapic1 at mainbus0 apid 0: pa 0xfec10000, version 20, 24 pins
> acpi0 at mainbus0: Intel ACPICA 20110623
> acpi0: X/RSDT: OemId <HP    ,ProLiant,00000002>, AslId <  ,0000162e>
> acpi0: SCI interrupting at int 9
> timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
> hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
> timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
> MOMB (PNP0C02) at acpi0 not configured
> MOMB (PNP0C02) at acpi0 not configured
> MI0 (IPI0001) at acpi0 not configured
> attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
> pcppi1 at acpi0 (BEEP, PNP0800): io 0x61
> midi0 at pcppi1: PC speaker
> sysbeep0 at pcppi1
> COMA (PNP0501) at acpi0 not configured
> pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
> pckbc2 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
> PMI0 (ACPI000D) at acpi0 not configured
> acpitz0 at acpi0 (THM0): cpu0
> acpitz0: levels: critical 31.3 C, passive 9.8 C, passive cooling
> attimer1: attached to pcppi1
> pckbd0 at pckbc1 (kbd slot)
> pckbc1: using irq 1 for kbd slot
> wskbd0 at pckbd0 mux 1
> pms0 at pckbc1 (aux slot)
> pckbc1: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> ipmi0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1
> pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
> pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x3c00 (rev. 0x07)
> ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x3c02 (rev. 0x07)
> ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex>
> pci1 at ppb0 bus 7
> pci1: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb1 at pci0 dev 1 function 1: vendor 0x8086 product 0x3c03 (rev. 0x07)
> ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex>
> pci2 at ppb1 bus 19
> pci2: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb2 at pci0 dev 2 function 0: vendor 0x8086 product 0x3c04 (rev. 0x07)
> ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex>
> pci3 at ppb2 bus 3
> pci3: i/o space, memory space enabled, rd/line, wr/inv ok
> vendor 0x14e4 product 0x1657 (ethernet network, revision 0x01) at pci3 dev 0
> function 0 not configured
> vendor 0x14e4 product 0x1657 (ethernet network, revision 0x01) at pci3 dev 0
> function 1 not configured
> vendor 0x14e4 product 0x1657 (ethernet network, revision 0x01) at pci3 dev 0
> function 2 not configured
> vendor 0x14e4 product 0x1657 (ethernet network, revision 0x01) at pci3 dev 0
> function 3 not configured
> ppb3 at pci0 dev 2 function 1: vendor 0x8086 product 0x3c05 (rev. 0x07)
> ppb3: PCI Express 2.0 <Root Port of PCI-E Root Complex>
> pci4 at ppb3 bus 20
> pci4: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb4 at pci0 dev 2 function 2: vendor 0x8086 product 0x3c06 (rev. 0x07)
> ppb4: PCI Express 2.0 <Root Port of PCI-E Root Complex>
> pci5 at ppb4 bus 2
> pci5: i/o space, memory space enabled, rd/line, wr/inv ok
> ciss has not been converted to device_t
> ciss0 at pci5 dev 0 function 0: HP Smart Array 12
> ciss0: interrupting at ioapic1 pin 10
> ciss0: 2 LDs, HW rev 1, FW 1.28/1.28
> scsibus0 at ciss0: 2 targets, 1 lun per target
> ppb5 at pci0 dev 2 function 3: vendor 0x8086 product 0x3c07 (rev. 0x07)
> ppb5: PCI Express 2.0 <Root Port of PCI-E Root Complex>
> pci6 at ppb5 bus 21
> pci6: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb6 at pci0 dev 3 function 0: vendor 0x8086 product 0x3c08 (rev. 0x07)
> ppb6: PCI Express 2.0 <Root Port of PCI-E Root Complex>
> pci7 at ppb6 bus 4
> pci7: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb7 at pci0 dev 3 function 1: vendor 0x8086 product 0x3c09 (rev. 0x07)
> ppb7: PCI Express 2.0 <Root Port of PCI-E Root Complex>
> pci8 at ppb7 bus 22
> pci8: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb8 at pci0 dev 3 function 2: vendor 0x8086 product 0x3c0a (rev. 0x07)
> ppb8: PCI Express 2.0 <Root Port of PCI-E Root Complex>
> pci9 at ppb8 bus 23
> pci9: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb9 at pci0 dev 3 function 3: vendor 0x8086 product 0x3c0b (rev. 0x07)
> ppb9: PCI Express 2.0 <Root Port of PCI-E Root Complex>
> pci10 at ppb9 bus 24
> pci10: i/o space, memory space enabled, rd/line, wr/inv ok
> vendor 0x8086 product 0x3c20 (miscellaneous system, revision 0x07) at pci0
> dev 4 function 0 not configured
> vendor 0x8086 product 0x3c21 (miscellaneous system, revision 0x07) at pci0
> dev 4 function 1 not configured
> vendor 0x8086 product 0x3c22 (miscellaneous system, revision 0x07) at pci0
> dev 4 function 2 not configured
> vendor 0x8086 product 0x3c23 (miscellaneous system, revision 0x07) at pci0
> dev 4 function 3 not configured
> vendor 0x8086 product 0x3c24 (miscellaneous system, revision 0x07) at pci0
> dev 4 function 4 not configured
> vendor 0x8086 product 0x3c25 (miscellaneous system, revision 0x07) at pci0
> dev 4 function 5 not configured
> vendor 0x8086 product 0x3c26 (miscellaneous system, revision 0x07) at pci0
> dev 4 function 6 not configured
> vendor 0x8086 product 0x3c27 (miscellaneous system, revision 0x07) at pci0
> dev 4 function 7 not configured
> vendor 0x8086 product 0x3c28 (miscellaneous system, revision 0x07) at pci0
> dev 5 function 0 not configured
> vendor 0x8086 product 0x3c2a (miscellaneous system, revision 0x07) at pci0
> dev 5 function 2 not configured
> vendor 0x8086 product 0x3c2c (interrupt system, interface 0x20, revision
> 0x07) at pci0 dev 5 function 4 not configured
> ppb10 at pci0 dev 17 function 0: vendor 0x8086 product 0x1d3e (rev. 0x05)
> ppb10: PCI Express 2.0 <Root Port of PCI-E Root Complex>
> pci11 at ppb10 bus 26
> pci11: i/o space, memory space enabled, rd/line, wr/inv ok
> ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x1d2d (rev. 0x05)
> ehci0: interrupting at ioapic0 pin 21
>

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.99.8 (GENERIC) #4: Mon Jul  9 14:20:00 BST 2012
        root@support5.delcam.local:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 16310 MB
avail memory = 15821 MB
timecounter: Timecounters tick every 10.000 msec
RTC BIOS diagnostic error 0x50<ROM_cksum,memory_size>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Hewlett-Packard HP Z420 Workstation
mainbus0 (root)
cpu0 at mainbus0 apid 0: Genuine Intel(R) CPU  @ 3.30GHz, id 0x206d5
cpu1 at mainbus0 apid 2: Genuine Intel(R) CPU  @ 3.30GHz, id 0x206d5
cpu2 at mainbus0 apid 4: Genuine Intel(R) CPU  @ 3.30GHz, id 0x206d5
cpu3 at mainbus0 apid 6: Genuine Intel(R) CPU  @ 3.30GHz, id 0x206d5
cpu4 at mainbus0 apid 8: Genuine Intel(R) CPU  @ 3.30GHz, id 0x206d5
cpu5 at mainbus0 apid 10: Genuine Intel(R) CPU  @ 3.30GHz, id 0x206d5
cpu6 at mainbus0 apid 1: Genuine Intel(R) CPU  @ 3.30GHz, id 0x206d5
cpu7 at mainbus0 apid 3: Genuine Intel(R) CPU  @ 3.30GHz, id 0x206d5
cpu8 at mainbus0 apid 5: Genuine Intel(R) CPU  @ 3.30GHz, id 0x206d5
cpu9 at mainbus0 apid 7: Genuine Intel(R) CPU  @ 3.30GHz, id 0x206d5
cpu10 at mainbus0 apid 9: Genuine Intel(R) CPU  @ 3.30GHz, id 0x206d5
cpu11 at mainbus0 apid 11: Genuine Intel(R) CPU  @ 3.30GHz, id 0x206d5
ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0 apid 2: pa 0xfec01000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <HPQOEM,SLIC-WKS,01072009>, AslId <AMI ,00010013>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
IOH (PNP0C01) at acpi0 not configured
SIO1 (PNP0C02) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F03) (aux port): irq 12
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
RMSC (PNP0C02) at acpi0 not configured
PCH (PNP0C01) at acpi0 not configured
CWDT (INT3F0D) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
RMEM (PNP0C01) at acpi0 not configured
SCK0 (ACPI0004) at acpi0 not configured
acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
wmihp0 at acpiwmi0: HP WMI mappings
OMSC (PNP0C02) at acpi0 not configured
HTAM (PNP0C02) at acpi0 not configured
attimer1: attached to pcppi1
ipmi: bus_space_map(..., 0, 2, 0, 0xffffffff810aeb78) failed
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x3c00 (rev. 0x05)
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x3c02 (rev. 0x05)
ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 3
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 2 function 0: vendor 0x8086 product 0x3c04 (rev. 0x05)
ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 5
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci2 dev 0 function 0: vendor 0x1002 product 0x68a9 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
radeondrm0 at vga0: ATI FirePro (FireGL)
radeondrm0: Initialized radeon 1.29.0 20080613
hdaudio0 at pci2 dev 0 function 1: HD Audio Controller
hdaudio0: interrupting at ioapic1 pin 12
hdafg0 at hdaudio0: ATI R6xx HDMI
hdafg0: HDMI00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
ppb2 at pci0 dev 3 function 0: vendor 0x8086 product 0x3c08 (rev. 0x05)
ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci3 at ppb2 bus 4
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x8086 product 0x3c28 (miscellaneous system, revision 0x05) at
pci0 dev 5 function 0 not configured
vendor 0x8086 product 0x3c2a (miscellaneous system, revision 0x05) at
pci0 dev 5 function 2 not configured
vendor 0x8086 product 0x3c2c (interrupt system, interface 0x20,
revision 0x05) at pci0 dev 5 function 4 not configured
ppb3 at pci0 dev 17 function 0: vendor 0x8086 product 0x1d3e (rev. 0x05)
ppb3: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci4 at ppb3 bus 2
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x8086 product 0x1d6b (SAS mass storage, revision 0x05) at pci4
dev 0 function 0 not configured
vendor 0x8086 product 0x1d3a (miscellaneous communications, revision
0x05) at pci0 dev 22 function 0 not configured
wm0 at pci0 dev 25 function 0: PCH2 LAN (82579LM) Controller (rev. 0x05)
wm0: interrupting at ioapic0 pin 20
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address 3c:d9:2b:79:c6:0c
ihphy0 at wm0 phy 2: i82579 10/100/1000 media interface, rev. 3
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x1d2d (rev. 0x05)
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 22
hdafg1 at hdaudio1: Realtek ALC262
hdafg1: DAC00 2ch: Speaker [Jack]
hdafg1: ADC02 2ch: Line In [Jack], Mic In [Jack]
hdafg1: DAC03 2ch: HP Out [Jack]
hdafg1: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg1: full duplex, playback, capture, independent
ppb4 at pci0 dev 28 function 0: vendor 0x8086 product 0x1d12 (rev. 0xb5)
ppb4: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci5 at ppb4 bus 1
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ppb5 at pci0 dev 28 function 5: vendor 0x8086 product 0x1d18 (rev. 0xb5)
ppb5: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
ppb6 at pci0 dev 28 function 6: vendor 0x8086 product 0x1d14 (rev. 0xb5)
ppb6: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
bnx0 at pci7 dev 0 function 0: Broadcom NetXtreme II BCM5709 1000Base-T
bnx0: Ethernet address 00:10:18:bc:3d:70
bnx0: interrupting at ioapic0 pin 18
brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bnx1 at pci7 dev 0 function 1: Broadcom NetXtreme II BCM5709 1000Base-T
bnx1: Ethernet address 00:10:18:bc:3d:72
bnx1: interrupting at ioapic0 pin 19
brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb7 at pci0 dev 28 function 7: vendor 0x8086 product 0x1d16 (rev. 0xb5)
ppb7: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci8 at ppb7 bus 8
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x104c product 0x8241 (USB serial bus, interface 0x30, revision
0x02) at pci8 dev 0 function 0 not configured
ehci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x1d26 (rev. 0x05)
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
ppb8 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xa5)
pci9 at ppb8 bus 9
pci9: i/o space, memory space enabled
fwohci0 at pci9 dev 5 function 0: vendor 0x11c1 product 0x5811 (rev. 0x70)
fwohci0: interrupting at ioapic0 pin 19
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:60:b0:00:00:00:00:2c
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
pcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x1d41 (rev. 0x05)
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2826 (rev. 0x05)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP
0xffffffffe3309f65<SXS,EMS,PMD,ISS=0x3=Gen3,SCLO,SAL,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 2
vendor 0x8086 product 0x1d22 (SMBus serial bus, revision 0x05) at pci0
dev 31 function 3 not configured
isa0 at pcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: IFX SLB 9635 TT 1.2 rev 0x10
pci10 at mainbus0 bus 128
pci10: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   3 us, pow  1000 mW
acpicpu0: C2: FFH, lat  93 us, pow   350 mW
acpicpu0: C3: FFH, lat  93 us, pow   200 mW, bus master check
acpicpu0: P0: FFH, lat  10 us, pow 130000 mW, 3301 MHz, turbo boost
acpicpu0: P1: FFH, lat  10 us, pow 130000 mW, 3300 MHz
acpicpu0: P2: FFH, lat  10 us, pow 118159 mW, 3100 MHz
acpicpu0: P3: FFH, lat  10 us, pow 113032 mW, 3000 MHz
acpicpu0: P4: FFH, lat  10 us, pow 103064 mW, 2800 MHz
acpicpu0: P5: FFH, lat  10 us, pow 98240 mW, 2700 MHz
acpicpu0: P6: FFH, lat  10 us, pow 88829 mW, 2500 MHz
acpicpu0: P7: FFH, lat  10 us, pow 84260 mW, 2400 MHz
acpicpu0: P8: FFH, lat  10 us, pow 75410 mW, 2200 MHz
acpicpu0: P9: FFH, lat  10 us, pow 71109 mW, 2100 MHz
acpicpu0: P10: FFH, lat  10 us, pow 62772 mW, 1900 MHz
acpicpu0: P11: FFH, lat  10 us, pow 58734 mW, 1800 MHz
acpicpu0: P12: FFH, lat  10 us, pow 50926 mW, 1600 MHz
acpicpu0: P13: FFH, lat  10 us, pow 47143 mW, 1500 MHz
acpicpu0: P14: FFH, lat  10 us, pow 39826 mW, 1300 MHz
acpicpu0: P15: FFH, lat  10 us, pow 36291 mW, 1200 MHz
acpicpu0: T0: FFH, lat   1 us, pow 36291 mW, 100 %
acpicpu0: T1: FFH, lat   1 us, pow 33871 mW,  94 %
acpicpu0: T2: FFH, lat   1 us, pow 31452 mW,  88 %
acpicpu0: T3: FFH, lat   1 us, pow 29032 mW,  82 %
acpicpu0: T4: FFH, lat   1 us, pow 26613 mW,  75 %
acpicpu0: T5: FFH, lat   1 us, pow 24194 mW,  69 %
acpicpu0: T6: FFH, lat   1 us, pow 21774 mW,  63 %
acpicpu0: T7: FFH, lat   1 us, pow 19355 mW,  57 %
acpicpu0: T8: FFH, lat   1 us, pow 16935 mW,  50 %
acpicpu0: T9: FFH, lat   1 us, pow 14516 mW,  44 %
acpicpu0: T10: FFH, lat   1 us, pow 12097 mW,  38 %
acpicpu0: T11: FFH, lat   1 us, pow  9677 mW,  32 %
acpicpu0: T12: FFH, lat   1 us, pow  7258 mW,  25 %
acpicpu0: T13: FFH, lat   1 us, pow  4838 mW,  19 %
acpicpu0: T14: FFH, lat   1 us, pow  2419 mW,  13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution
acpicpu4 at cpu4: ACPI CPU
coretemp4 at cpu4: thermal sensor, 1 C resolution
acpicpu5 at cpu5: ACPI CPU
coretemp5 at cpu5: thermal sensor, 1 C resolution
acpicpu6 at cpu6: ACPI CPU
acpicpu7 at cpu7: ACPI CPU
acpicpu8 at cpu8: ACPI CPU
acpicpu9 at cpu9: ACPI CPU
acpicpu10 at cpu10: ACPI CPU
acpicpu11 at cpu11: ACPI CPU
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 6.0Gb/s
ahcisata0 port 2: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0
wd0: <ST3500413AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
(Ultra/100) (using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <hp      DVD A  DH16ABSH, 2D8128905110,
YHD9> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
(Ultra/100) (using DMA)
uhub2 at uhub0 port 1: vendor 0x8087 product 0x0024, class 9/0, rev
2.00/0.00, addr 2
uhub2: single transaction translator
uhub3 at uhub1 port 1: vendor 0x8087 product 0x0024, class 9/0, rev
2.00/0.00, addr 2
uhub3: single transaction translator
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
uhidev0 at uhub2 port 2 configuration 1 interface 0
uhidev0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev
1.10/3.00, addr 3, iclass 3/1
ums0 at uhidev0: 5 buttons and Z dir
wsmouse0 at ums0 mux 0
umass0 at uhub2 port 4 configuration 1 interface 0
umass0: Generic USB2.0-CRW, rev 2.00/81.97, addr 4
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 5 luns per target
sd0 at scsibus0 target 0 lun 0: <Generic-, Compact Flash, 1.00> disk removable
sd0: drive offline
sd0: unable to open device, error = 19
sd1 at scsibus0 target 0 lun 1: <Generic-, SM/xD-Picture, 1.00> disk removable
sd1: drive offline
sd1: unable to open device, error = 19
sd2 at scsibus0 target 0 lun 2: <Generic-, SD/MMC, 1.00> disk removable
sd2: drive offline
sd2: unable to open device, error = 19
sd3 at scsibus0 target 0 lun 3: <Generic-, MS/MS-Pro/HG, 1.00> disk removable
sd3: drive offline
sd3: unable to open device, error = 19
sd4 at scsibus0 target 0 lun 4: <Generic-, SD/MMC/MS/MSPRO, 1.00> disk removable
sd4: drive offline
sd4: unable to open device, error = 19
uhidev1 at uhub2 port 6 configuration 1 interface 0
uhidev1: Microsoft MicrosoftM-BM-. Digital Media Keyboard, rev
2.00/1.43, addr 5, iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev2 at uhub2 port 6 configuration 1 interface 1
uhidev2: Microsoft MicrosoftM-BM-. Digital Media Keyboard, rev
2.00/1.43, addr 5, iclass 3/0
uhidev2: 3 report ids
uhid0 at uhidev2 reportid 1: input=7, output=0, feature=0
uhid1 at uhidev2 reportid 3: input=1, output=0, feature=0
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
...

Chavdar Ivanov

-- 
----
References:
- HP DL380 Gen8 / G8 Boot Log
  - From: Brian A. Seklecki
Prev by Date: Re: linux emulation: llistxattr
Next by Date: Re: linux emulation: listxattr
Previous by Thread: HP DL380 Gen8 / G8 Boot Log
Indexes:
Home | Main Index | Thread Index | Old Index