HP DL380 Gen8 / G8 Boot Log

To: port-amd64%netbsd.org@localhost
Subject: HP DL380 Gen8 / G8 Boot Log
From: "Brian A. Seklecki" <lavalamp%spiritual-machines.org@localhost>
Date: Thu, 12 Jul 2012 13:21:09 -0400 (EDT)

FYI the latest amd64/-current HEAD build from today doesn't seem tosupport much of HP latest Gen8 hardware.


Additionally, it seems to lock initializing the EHCI controller.

I'll try to get an lspci/dmidecode from a booted RHEL6 system forreference. Pastebin is blocked at work, or dmesgd, but I don't want topost in incomplete/non-booting log.


~BAS

-----------------


</>hpiLO-> vsp

Virtual Serial Port Active: COM2

Starting virtual serial port.
Press 'ESC (' to return to the CLI Session.

NetBSD/x86 BIOS Boot, Revision 5.9 (from NetBSD 6.99.8)
Memory: 602/3144704 k

boot

12435720+620392+632472 [842136+558319]=0xf65680
Loading /stand/amd64/6.99.8/modules/cd9660/cd9660.kmod
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.99.8 (GENERIC) #0: Wed Jul 11 10:45:05 UTC 2012

builds%b6.netbsd.org@localhost:/home/builds/ab/HEAD/amd64/201207110830Z-obj/home/builds/ab/HEAD/src/sys/arch/amd64/compile/GENERIC
total memory = 16349 MB
avail memory = 15859 MB
mainbus0 (root)

ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16(20110623/tbfadt-638)ACPI Warning: Invalid length for Pm2ControlBlock: 32, using default 8(20110623/tbfadt-638)cpu0 at mainbus0 apid 0: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id0x206d7cpu1 at mainbus0 apid 2: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id0x206d7cpu2 at mainbus0 apid 4: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id0x206d7cpu3 at mainbus0 apid 6: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id0x206d7cpu4 at mainbus0 apid 1: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id0x206d7cpu5 at mainbus0 apid 3: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id0x206d7cpu6 at mainbus0 apid 5: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id0x206d7cpu7 at mainbus0 apid 7: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id0x206d7

ioapic0 at mainbus0 apid 8
ioapic1 at mainbus0 apid 0
acpi0 at mainbus0: Intel ACPICA 20110623
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
MOMB (PNP0C02) at acpi0 not configured
MOMB (PNP0C02) at acpi0 not configured
MI0 (IPI0001) at acpi0 not configured
attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (BEEP, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
COMA (PNP0501) at acpi0 not configured
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
PMI0 (ACPI000D) at acpi0 not configured
acpitz0 at acpi0 (THM0): cpu0
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
ipmi0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x3c00 (rev. 0x07)
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x3c02 (rev. 0x07)
ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 7
ppb1 at pci0 dev 1 function 1: vendor 0x8086 product 0x3c03 (rev. 0x07)
ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 19
ppb2 at pci0 dev 2 function 0: vendor 0x8086 product 0x3c04 (rev. 0x07)
ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci3 at ppb2 bus 3

vendor 0x14e4 product 0x1657 (ethernet network, revision 0x01) at pci3 dev0 function 0 not configuredvendor 0x14e4 product 0x1657 (ethernet network, revision 0x01) at pci3 dev0 function 1 not configuredvendor 0x14e4 product 0x1657 (ethernet network, revision 0x01) at pci3 dev0 function 2 not configuredvendor 0x14e4 product 0x1657 (ethernet network, revision 0x01) at pci3 dev0 function 3 not configured

ppb3 at pci0 dev 2 function 1: vendor 0x8086 product 0x3c05 (rev. 0x07)
ppb3: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci4 at ppb3 bus 20
ppb4 at pci0 dev 2 function 2: vendor 0x8086 product 0x3c06 (rev. 0x07)
ppb4: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci5 at ppb4 bus 2
ciss has not been converted to device_t
ciss0 at pci5 dev 0 function 0: HP Smart Array 12
ciss0: interrupting at ioapic1 pin 10
ciss0: 2 LDs, HW rev 1, FW 1.28/1.28
scsibus0 at ciss0: 2 targets, 1 lun per target
ppb5 at pci0 dev 2 function 3: vendor 0x8086 product 0x3c07 (rev. 0x07)
ppb5: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci6 at ppb5 bus 21
ppb6 at pci0 dev 3 function 0: vendor 0x8086 product 0x3c08 (rev. 0x07)
ppb6: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci7 at ppb6 bus 4
ppb7 at pci0 dev 3 function 1: vendor 0x8086 product 0x3c09 (rev. 0x07)
ppb7: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci8 at ppb7 bus 22
ppb8 at pci0 dev 3 function 2: vendor 0x8086 product 0x3c0a (rev. 0x07)
ppb8: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci9 at ppb8 bus 23
ppb9 at pci0 dev 3 function 3: vendor 0x8086 product 0x3c0b (rev. 0x07)
ppb9: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci10 at ppb9 bus 24

vendor 0x8086 product 0x3c20 (miscellaneous system, revision 0x07) at pci0dev 4 function 0 not configuredvendor 0x8086 product 0x3c21 (miscellaneous system, revision 0x07) at pci0dev 4 function 1 not configuredvendor 0x8086 product 0x3c22 (miscellaneous system, revision 0x07) at pci0dev 4 function 2 not configuredvendor 0x8086 product 0x3c23 (miscellaneous system, revision 0x07) at pci0dev 4 function 3 not configuredvendor 0x8086 product 0x3c24 (miscellaneous system, revision 0x07) at pci0dev 4 function 4 not configuredvendor 0x8086 product 0x3c25 (miscellaneous system, revision 0x07) at pci0dev 4 function 5 not configuredvendor 0x8086 product 0x3c26 (miscellaneous system, revision 0x07) at pci0dev 4 function 6 not configuredvendor 0x8086 product 0x3c27 (miscellaneous system, revision 0x07) at pci0dev 4 function 7 not configuredvendor 0x8086 product 0x3c28 (miscellaneous system, revision 0x07) at pci0dev 5 function 0 not configuredvendor 0x8086 product 0x3c2a (miscellaneous system, revision 0x07) at pci0dev 5 function 2 not configuredvendor 0x8086 product 0x3c2c (interrupt system, interface 0x20, revision0x07) at pci0 dev 5 function 4 not configured

ppb10 at pci0 dev 17 function 0: vendor 0x8086 product 0x1d3e (rev. 0x05)
ppb10: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci11 at ppb10 bus 26
ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x1d2d (rev. 0x05)
ehci0: interrupting at ioapic0 pin 21

NetBSD/x86 BIOS Boot, Revision 5.9 (from NetBSD 6.99.8)
Memory: 602/3144704 k

boot -v

booting cd0a:netbsd (howto 0x20000)
12435720-

boot -v

booting cd0a:netbsd (howto 0x20000)
12435720+620392+632472 [842136+558319]=0xf65680
Loading /stand/amd64/6.99.8/modules/cd9660/cd9660.kmod
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.99.8 (GENERIC) #0: Wed Jul 11 10:45:05 UTC 2012

builds%b6.netbsd.org@localhost:/home/builds/ab/HEAD/amd64/201207110830Z-obj/home/builds/ab/HEAD/src/sys/arch/amd64/compile/GENERIC
total memory = 16349 MB
avail memory = 15859 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
HP ProLiant DL380p Gen8
mainbus0 (root)

: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id 0x206d7

cpu1 at mainbus0 apid 2: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id0x206d7cpu2 at mainbus0 apid 4: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id0x206d7cpu3 at mainbus0 apid 6: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id0x206d7cpu4 at mainbus0 apid 1: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id0x206d7cpu5 at mainbus0 apid 3: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id0x206d7cpu6 at mainbus0 apid 5: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id0x206d7cpu7 at mainbus0 apid 7: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, id0x206d7

ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0 apid 0: pa 0xfec10000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <HP    ,ProLiant,00000002>, AslId <  ,0000162e>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
MOMB (PNP0C02) at acpi0 not configured
MOMB (PNP0C02) at acpi0 not configured
MI0 (IPI0001) at acpi0 not configured
attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (BEEP, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
COMA (PNP0501) at acpi0 not configured
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
PMI0 (ACPI000D) at acpi0 not configured
acpitz0 at acpi0 (THM0): cpu0
acpitz0: levels: critical 31.3 C, passive 9.8 C, passive cooling
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
ipmi0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x3c00 (rev. 0x07)
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x3c02 (rev. 0x07)
ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 7
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 1 function 1: vendor 0x8086 product 0x3c03 (rev. 0x07)
ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 19
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 2 function 0: vendor 0x8086 product 0x3c04 (rev. 0x07)
ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok

ppb3 at pci0 dev 2 function 1: vendor 0x8086 product 0x3c05 (rev. 0x07)
ppb3: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci4 at ppb3 bus 20
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 2 function 2: vendor 0x8086 product 0x3c06 (rev. 0x07)
ppb4: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci5 at ppb4 bus 2
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ciss has not been converted to device_t
ciss0 at pci5 dev 0 function 0: HP Smart Array 12
ciss0: interrupting at ioapic1 pin 10
ciss0: 2 LDs, HW rev 1, FW 1.28/1.28
scsibus0 at ciss0: 2 targets, 1 lun per target
ppb5 at pci0 dev 2 function 3: vendor 0x8086 product 0x3c07 (rev. 0x07)
ppb5: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci6 at ppb5 bus 21
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
ppb6 at pci0 dev 3 function 0: vendor 0x8086 product 0x3c08 (rev. 0x07)
ppb6: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci7 at ppb6 bus 4
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
ppb7 at pci0 dev 3 function 1: vendor 0x8086 product 0x3c09 (rev. 0x07)
ppb7: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci8 at ppb7 bus 22
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
ppb8 at pci0 dev 3 function 2: vendor 0x8086 product 0x3c0a (rev. 0x07)
ppb8: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci9 at ppb8 bus 23
pci9: i/o space, memory space enabled, rd/line, wr/inv ok
ppb9 at pci0 dev 3 function 3: vendor 0x8086 product 0x3c0b (rev. 0x07)
ppb9: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci10 at ppb9 bus 24
pci10: i/o space, memory space enabled, rd/line, wr/inv ok

ppb10 at pci0 dev 17 function 0: vendor 0x8086 product 0x1d3e (rev. 0x05)
ppb10: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci11 at ppb10 bus 26
pci11: i/o space, memory space enabled, rd/line, wr/inv ok
ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x1d2d (rev. 0x05)
ehci0: interrupting at ioapic0 pin 21

Follow-Ups:
- Re: HP DL380 Gen8 / G8 Boot Log
  - From: Chavdar Ivanov

Prev by Date: linux emulation: llistxattr
Next by Date: Re: linux emulation: llistxattr
Previous by Thread: FYI: -current sysinst in amd64 domu dumps core
Next by Thread: Re: HP DL380 Gen8 / G8 Boot Log
Indexes:

Home | Main Index | Thread Index | Old Index