pkgsrc-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[pkgsrc/trunk]: pkgsrc/sysutils/mencvcd mencvcd: update to 1.4.
details: https://anonhg.NetBSD.org/pkgsrc/rev/2c78ff70b7d3
branches: trunk
changeset: 423944:2c78ff70b7d3
user: wiz <wiz%pkgsrc.org@localhost>
date: Sun Mar 01 11:50:24 2020 +0000
description:
mencvcd: update to 1.4.
This switches it to use the script from the mplayer sources.
Modification date is still from 2011.
Changes not found.
diffstat:
sysutils/mencvcd/Makefile | 25 +-
sysutils/mencvcd/PLIST | 4 +-
sysutils/mencvcd/distinfo | 12 +-
sysutils/mencvcd/patches/patch-TOOLS_mencvcd.sh | 176 ++++++++++++++++++++++++
sysutils/mencvcd/patches/patch-aa | 175 -----------------------
5 files changed, 197 insertions(+), 195 deletions(-)
diffs (truncated from 434 to 300 lines):
diff -r ce427ce36d2c -r 2c78ff70b7d3 sysutils/mencvcd/Makefile
--- a/sysutils/mencvcd/Makefile Sun Mar 01 11:46:43 2020 +0000
+++ b/sysutils/mencvcd/Makefile Sun Mar 01 11:50:24 2020 +0000
@@ -1,16 +1,17 @@
-# $NetBSD: Makefile,v 1.16 2017/09/03 08:37:00 wiz Exp $
+# $NetBSD: Makefile,v 1.17 2020/03/01 11:50:24 wiz Exp $
-DISTNAME= mencvcd
-PKGNAME= ${DISTNAME}-0.3
-PKGREVISION= 5
+DISTNAME= MPlayer-1.4
+PKGNAME= ${DISTNAME:S/MPlayer/mencvcd/}
CATEGORIES= sysutils
-MASTER_SITES= http://hammelmann.gmxhome.de/
-EXTRACT_SUFX=
+MASTER_SITES= http://www.mplayerhq.hu/MPlayer/releases/
+DIST_SUBDIR= mplayer
+EXTRACT_SUFX= .tar.xz
-MAINTAINER= pkgsrc-users%NetBSD.org@localhost
-# "MEncVCD is part of MPlayer. You can find it in subdirectory TOOLS/ of the source code."
+MAINTAINER?= pkgsrc-users%NetBSD.org@localhost
#HOMEPAGE= http://hammelmann.gmxhome.de/projects_en.html
+HOMEPAGE= http://www.mplayerhq.hu/
COMMENT= Script for converting movie files into (S)VCD format
+LICENSE= gnu-gpl-v2 # just says "GPL"
DEPENDS+= cdrdao>=1.1.9:../../sysutils/cdrdao
DEPENDS+= lame>=3.96.1:../../audio/lame
@@ -20,16 +21,16 @@
DEPENDS+= sox>=12.16:../../audio/sox
DEPENDS+= vcdimager>=0.6.2:../../sysutils/vcdimager
-DIST_SUBDIR= ${PKGNAME_NOREV}
-WRKSRC= ${WRKDIR}
+CHECK_PORTABILITY_SKIP= ffmpeg/configure # not used by package
+
NO_BUILD= yes
INSTALLATION_DIRS= bin
-REPLACE_BASH= mencvcd
+REPLACE_BASH= TOOLS/mencvcd.sh
USE_TOOLS+= bash:run
do-install:
- ${INSTALL_SCRIPT} ${WRKSRC}/mencvcd ${DESTDIR}${PREFIX}/bin/mencvcd
+ ${INSTALL_SCRIPT} ${WRKSRC}/TOOLS/mencvcd.sh ${DESTDIR}${PREFIX}/bin
.include "../../mk/bsd.pkg.mk"
diff -r ce427ce36d2c -r 2c78ff70b7d3 sysutils/mencvcd/PLIST
--- a/sysutils/mencvcd/PLIST Sun Mar 01 11:46:43 2020 +0000
+++ b/sysutils/mencvcd/PLIST Sun Mar 01 11:50:24 2020 +0000
@@ -1,2 +1,2 @@
-@comment $NetBSD: PLIST,v 1.1.1.1 2005/01/27 23:07:40 tron Exp $
-bin/mencvcd
+@comment $NetBSD: PLIST,v 1.2 2020/03/01 11:50:24 wiz Exp $
+bin/mencvcd.sh
diff -r ce427ce36d2c -r 2c78ff70b7d3 sysutils/mencvcd/distinfo
--- a/sysutils/mencvcd/distinfo Sun Mar 01 11:46:43 2020 +0000
+++ b/sysutils/mencvcd/distinfo Sun Mar 01 11:50:24 2020 +0000
@@ -1,7 +1,7 @@
-$NetBSD: distinfo,v 1.6 2015/11/04 01:32:21 agc Exp $
+$NetBSD: distinfo,v 1.7 2020/03/01 11:50:24 wiz Exp $
-SHA1 (mencvcd-0.3/mencvcd) = a3ace9d50e0722946286b8704b800ccbce86233b
-RMD160 (mencvcd-0.3/mencvcd) = 3785524bf26a9c7630a08a29b246d209c0b19d3c
-SHA512 (mencvcd-0.3/mencvcd) = b9a705b279301e173dd9358a7d45a97608d2fe5f0896fa3ae021609e5402f6351daf39ece53bb538fb083ce84e07f5e8e13c3f506c62099aa7eda0b26d59e388
-Size (mencvcd-0.3/mencvcd) = 13038 bytes
-SHA1 (patch-aa) = 3bc66db72486cc08766aa3b54ff44fe6a8b958b4
+SHA1 (mplayer/MPlayer-1.4.tar.xz) = 0954a7141de7c945d90db234e39a78c27cf73f78
+RMD160 (mplayer/MPlayer-1.4.tar.xz) = 7f94e3e3f127491f70a93a8699a1192c0771e20b
+SHA512 (mplayer/MPlayer-1.4.tar.xz) = 8ef71cad187d8c8f81c837279bd3a421b440c892d3347a667670b21c954007e35cf0d15828f0901f347b9c1b053e8da4bc7f0fb6de34382d1e463074923d7b34
+Size (mplayer/MPlayer-1.4.tar.xz) = 15054920 bytes
+SHA1 (patch-TOOLS_mencvcd.sh) = 61ee925b9fcc5790158e1ea45b01380b837a0f2a
diff -r ce427ce36d2c -r 2c78ff70b7d3 sysutils/mencvcd/patches/patch-TOOLS_mencvcd.sh
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/sysutils/mencvcd/patches/patch-TOOLS_mencvcd.sh Sun Mar 01 11:50:24 2020 +0000
@@ -0,0 +1,176 @@
+$NetBSD: patch-TOOLS_mencvcd.sh,v 1.1 2020/03/01 11:50:24 wiz Exp $
+
+Historic patch, not all parts clear.
+
+Some are just more quoting.
+
+--- TOOLS/mencvcd.sh.orig 2011-01-31 15:45:46.000000000 +0000
++++ TOOLS/mencvcd.sh
+@@ -22,7 +22,7 @@ for exe in mplayer mpeg2enc mp2enc mplex
+ exit 1
+ fi
+ done
+-for exe in vcdimager lame cdrdao yuvdenoise sox toolame normalize; do
++for exe in vcdimager lame cdrdao sox toolame normalize; do
+ if [ -z "`which $exe`" ]; then
+ echo "WARNING: $exe is not found in your path $PATH!"
+ fi
+@@ -80,9 +80,6 @@ done
+
+ TMPDIR="." # path to directory for creating temporary files, recommended 2-3GB space
+
+-CDDRV="generic-mmc" # cdrdao: cdwriter driver
+-CDDEV="--device 0,1,0" # or comment out and create link /dev/cdrecorder
+- # to your cdwriter dev
+ CDMAXSIZE=800
+
+ ################################################################################
+@@ -120,6 +117,7 @@ usage() {
+ echo "-noburn disables burning."
+ echo "-normalize use 'normalize'."
+ echo "-overburn enables overburning a cd."
++ echo "-qmat <name> quantisation matrix for mpeg2enc"
+ echo "-pulldown enable pulldown mode in output."
+ echo "-ratio <s> output ratio size of frames, see yuvscaler (1)."
+ echo "-size <X>x<Y> sets output size of frames."
+@@ -179,7 +177,7 @@ case $1 in
+ exit 1
+ ;;
+ *)
+- NAME=$1
++ NAME="$1"
+ shift 1
+ ;;
+ esac
+@@ -208,9 +206,9 @@ abrset=0
+ asr=44100
+ vbr=1152
+ vbrset=0
+-denoise="cat -"
++denoise=""
+ vnorm="VCD"
+-mplexnorm="-f $VCDMODE -m 1 -V -b 46"
++mplexnorm="-f $VCDMODE -V -b 46"
+ imaget="-t vcd2"
+ yuvin=""
+ framerate=""
+@@ -229,6 +227,7 @@ while [ "$1"x != "x" ]; do
+ shift 1
+ ;;
+ -w)
++qmat="-K kvcd"
+ wide="-M WIDE2STD"
+ ;;
+ -h|-?)
+@@ -289,12 +288,16 @@ while [ "$1"x != "x" ]; do
+ shift 1
+ ;;
+ -denoise)
+- denoise="yuvdenoise"
++ denoise="-vf denoise3d"
+ ;;
+ -ratio)
+ ratio=$2
+ shift 1
+ ;;
++ -qmat)
++ qmat="-K $2"
++ shift 1
++ ;;
+ -sid) # mplayer option: have to set vf expand, too!!!
+ sub="-vf pp,expand=-1:-1:-1:-1:1 -sid $2"
+ shift 1
+@@ -332,7 +335,7 @@ done
+ mpegnorm="-f $VCDMODE -b $vbr -B 260 -V 46"
+ if [ "$vnorm" = "SVCD" ]; then
+ [ $vbrset -eq 0 ] && vbr=2500
+- mplexnorm="-f $SVCDMODE -m 2 -V -b 230"
++ mplexnorm="-f $SVCDMODE -V -b 230"
+ mpegnorm="-f $SVCDMODE -b $vbr -B 260 -V 230"
+ imaget="-t svcd"
+ fi
+@@ -361,10 +364,9 @@ if [ $burnonly -eq 0 ]; then
+ $command &
+
+ # mjpegtools
+- ($denoise < $VIDEO | \
+- yuvscaler -v 0 $wide -O $vnorm $size $yuvin | \
+- mpeg2enc -v 0 -s $mpegnorm $aratio -S $CDMAXSIZE -g 6 -G 15 -r 16 \
+- $pd $framerate $yuvin -4 2 -2 1 -o $NAME.mpv) &
++ (yuvscaler -v 0 $wide -O $vcdnorm $size $active $tvnorm < $VIDEO |
++ mpeg2enc -v 0 $qmat -s $mpegnorm $aratio -S $CDMAXSIZE -g 6 -G 15 \
++ -r 16 $pd $framerate $tvnorm -4 2 -2 1 -o "$NAME.mpv") &
+
+ # wait for finishing the subprocesses
+ wait
+@@ -375,23 +377,23 @@ if [ $burnonly -eq 0 ]; then
+ # do resampling with sox
+ if [ $sox -ne 0 ]; then
+ echo "wait, do resampling with sox..."
+- sox $AUDIO -v $volume -r $asr $NAME.wav resample -qs
+- mv -f $NAME.wav $AUDIO
++ sox $AUDIO -v $volume -r $asr "$NAME.wav" resample -qs
++ mv -f "$NAME.wav" $AUDIO
+ fi
+
+ if [ $toolame -ne 0 -a $mp3 -eq 0 ]; then
+ # do mp2 encoding with toolame
+ echo "wait, encoding to mp2 audio with toolame..."
+ toolame -b $abr $AUDIO
+- mv -f `basename $AUDIO .wav`.mp2 $NAME.mpa
++ mv -f `basename $AUDIO .wav`.mp2 "$NAME.mpa"
+ elif [ $toolame -eq 0 -a $mp3 -eq 0 ]; then
+ # mp2enc/lame can't read audiodump.wav directly from named pipe,
+ # we have to read the whole file.
+ echo "wait, encoding to mp2 audio with mp2enc..."
+- mp2enc -b $abr -r $asr -o $NAME.mpa < $AUDIO
++ mp2enc -b $abr -r $asr -o "$NAME.mpa" < $AUDIO
+ elif [ $mp3 -ne 0 ]; then
+ echo "wait, encoding to mp3 audio with lame..."
+- lame -b $abr --resample $kasr - $NAME.mpa < $AUDIO
++ lame -b $abr --resample $kasr - "$NAME.mpa" < $AUDIO
+ fi
+ fi
+
+@@ -399,9 +401,9 @@ if [ $burnonly -eq 0 ]; then
+ rm -f $AUDIO
+
+ # multiplex streams
+- [ -f $NAME.mpv -a -f $NAME.mpa ] || exit 1
+- rm -f ${NAME}*.mpg
+- mplex $mplexnorm $sync $NAME.mpv $NAME.mpa -o ${NAME}%d.mpg
++ [ -f "$NAME.mpv" -a -f "$NAME.mpa" ] || exit 1
++ rm -f "${NAME}*.mpg"
++ mplex $mplexnorm $sync "$NAME.mpv" "$NAME.mpa" -o "${NAME}%d.mpg"
+
+ # remove pipe, won't need anymore!
+ rm -f $VIDEO
+@@ -410,7 +412,7 @@ if [ $burnonly -eq 0 ]; then
+ [ $mpgonly -eq 1 ] && exit 0
+
+ # create cd images
+- for mpg in ${NAME}*.mpg; do
++ for mpg in "${NAME}*.mpg"; do
+ [ -f $mpg ] || exit 1
+ cue="`basename $mpg .mpg`.cue"
+ bin="`basename $mpg .mpg`.bin"
+@@ -425,7 +427,7 @@ fi
+ # burn the (s)vcd's
+ [ $burn -eq 0 ] && exit 0
+
+-for cue in ${NAME}*.cue; do
++for cue in "${NAME}*.cue"; do
+ bin="`basename $cue .cue`.bin"
+ [ -f $bin -a -f $cue ] || exit 1
+
+@@ -433,8 +435,8 @@ for cue in ${NAME}*.cue; do
+ read -n 1 i
+
+ if [ $blank -eq 1 ]; then
+- cdrdao blank --reload $CDDEV --driver $CDDRV --blank-mode minimal
++ cdrdao blank --reload --blank-mode minimal
+ fi
+- cdrdao write $overburn --reload $CDDEV --driver $CDDRV $cue
++ cdrdao write $overburn --reload $cue
+ done
+ exit 0
diff -r ce427ce36d2c -r 2c78ff70b7d3 sysutils/mencvcd/patches/patch-aa
--- a/sysutils/mencvcd/patches/patch-aa Sun Mar 01 11:46:43 2020 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,175 +0,0 @@
-$NetBSD: patch-aa,v 1.3 2007/11/01 08:34:43 rillig Exp $
-
---- mencvcd.orig 2003-06-13 21:06:02.000000000 +0100
-+++ mencvcd 2005-02-02 08:20:24.000000000 +0000
-@@ -23,7 +22,7 @@
- exit 1
- fi
- done
--for exe in vcdimager lame cdrdao yuvdenoise sox toolame normalize; do
-+for exe in vcdimager lame cdrdao sox toolame normalize; do
- if [ -z "`which $exe`" ]; then
- echo "WARNING: $exe is not found in your path $PATH!"
- fi
-@@ -85,9 +84,6 @@
-
- TMPDIR="." # path to directory for creating temporary files, recommended 2-3GB space
-
--CDDRV="generic-mmc" # cdrdao: cdwriter driver
--CDDEV="--device 0,1,0" # or comment out and create link /dev/cdrecorder
-- # to your cdwriter dev
- CDMAXSIZE=800
-
- ################################################################################
-@@ -127,6 +123,7 @@
- echo "-noburn disables burning."
- echo "-normalize use 'normalize'."
- echo "-overburn enables overburning a cd."
-+ echo "-qmat <name> quantisation matrix for mpeg2enc"
- echo "-pulldown enable pulldown mode in output."
- echo "-ratio <s> output ratio size of frames, see yuvscaler (1)."
- echo "-size <X>x<Y> sets output size of frames."
-@@ -186,7 +183,7 @@
- exit 1
- ;;
- *)
-- NAME=$1
-+ NAME="$1"
- shift 1
- ;;
- esac
-@@ -217,9 +214,9 @@
Home |
Main Index |
Thread Index |
Old Index