pkgsrc-Changes-HG archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

[pkgsrc/trunk]: pkgsrc/databases/p5-App-Sqitch Update to 0.9995



details:   https://anonhg.NetBSD.org/pkgsrc/rev/8823acc11e24
branches:  trunk
changeset: 350469:8823acc11e24
user:      wen <wen%pkgsrc.org@localhost>
date:      Thu Jul 28 12:40:58 2016 +0000

description:
Update to 0.9995

Upstream changes:
0.9995 2016-07-27T09:23:55Z
     - Taught the `add` command not to ignore the `--change` option.
     - The `add` command now emits a usage statement when no change name is
       passed to it.
     - The `add` command now helpfully suggests using the --change option when
       attempting to add a change with the same name as a target. Thanks to
       Ivan Nunes for the report!
     - The `tag` command now helpfully suggests using the --tag option when
       attempting to add a tag with the same name as a target.
     - Added `--global` as an alias for `--user` to the `config` command. This
       alias benefits the muscle memory of Git users.
     - Added a note for Git users to the `sqitch-revert` documentation, to
       head off potential confusion with `git revert`. Thanks to Eric
       Br?chemier for the "time travel" analogy and wording.
     - Fixed an "uninitialized value" error when creating a registry database
       on Windows. Thanks to Steven C. Buttgereit for the report (Issue #289).
     - Fixed editor selection to prioritize the `core.editor` configuration
       variable over the `$EDITOR` environment variable. The `$SQITCH_EDITOR`
       environment variable still trumps all. Thanks to Jim Nasby for the pull
       request (#296).
     - Added detection of the `$VISUAL` environment variable to Editor
       selection, prioritzed after the `core.editor` configuration variable
       and before the `$EDITOR` environment variable. Thanks to Jim Nasby for
       the pull request (#296).
     - Updated the DateTime code to set the locale via `set_locale()` instead
       of `set()`, as the latter may actually change the local time
       unintentionally, and has been deprecated since DateTime v1.04. Thanks
       to Dave Rolsky for the pull request (#304).

0.9994 2016-01-08T19:46:43Z
     - Reduced minimum required MySQL engine from 5.1.0 to 5.0.0. Thanks to
       @dgc-wh for testing it (Issue #251).
     - Fixed floating-point rounding issue with SQLite registry versions on
       Perls with 16-byte doubles. Thanks to H. Merijn Brand for the report
       and testing.
     - Fixed an error when adding an engine with the `engine` command. Thanks
       to Victor Mours for the report and fix!
     - Updated the Oracle engine to support Oracle Wallet connection strings,
       where no username or host is in the connection URI. Thanks to Timothy
       Procter for the patch!
     - Improved the installer's selection of the prefix in which to install
       `etc` files to better match the `--installdirs` option, which defaults
       to the "site" directories. Thanks to @carragom for the pull request
       (#265).
     - Added missing dash to `-engine` in sample calls to `sqitch init` in the
       tutorials. Thanks to Andrew Dunstan for the spot (Issue #268).
     - Fixed broken Vertica documentation links.
     - Attempting to revert a database with no associated registry no longer
       reports the registry as version 0, but correctly reports that no
       registry can be found. Thanks to Arnaldo Piccinelli for the spot (Issue
       #271).
     - Fixed the search for change IDs in engines to match the search for
       changes. Specifically, change ID seaerch now properly handles the
       offset characters `~` and `^`. This bug mainly affected the `verify`
       command, but it's good to address the inconsistency, done mainly by
       adding the `find_change_id` and `change_id_offset_from_id` methods to
       complement the `find_change` and `change_offset_from_id` methods.
       Thanks to Andrew Dunstan for the spot (Issue #272).
     - Fixed the `flips` table example in the MySQL tutorial. It was
       inappropriately copied from the PostgreSQL tutorial at some point.
       Thanks to Jeff Carpenter for the spot (Issue #254)!

0.9993  2015-08-17T17:55:26Z
     [Bug Fixes]
     - Eliminated test failures due to warnings from DateTime::Locale when
       `LC_TIME` is set to C.UTF-8. Thanks to Shantanu Bhadoria for the report
       and Dave Rolsky for the workaround.
     - Fixed an error checking the registry version when the local uses a
       comma for decimal values. Thanks to Steffen M?ller for the report
       (Issue #234).
     - Worked around an error setting the MySQL storage engine using versions
       of DBI prior to 1.631. Thanks to melon-babak for the report!
     - Fixed an error from the Oracle engine when deploying more than 1000
       changes. Thanks to Timothy Procter and Minh Hoang for the report and
       testing the fix.
     - Fixed a bunch of typos in error messages, comments, and documentation.
       Thanks to Dmitriy for the pull request!
     - Fixed test failures due to new warnings from File::Path on Perl
       5.23.1.
     - On Firebird, Looking up a change and tag in the database (via the
       `--onto` option to `rebase` or the `--to` option to `revert`, among
       others) would sometimes return the incorrect change if the change has
       been reworked two or more times. Was fixed for the other engines in
       v0.9991.
     - Fixed the `--all` option used to apply a command to all known targets
       so that it loads only targets specified by the local configuration.
       Otherwise, user and system configuration can get in the way when they
       specify engines and targets not used by the current project.
     [Improvements]
     - Added support for the `--set` option when deploying to MySQL. Thanks to
       Chris Bandy for figuring out how to do it!
     - Added support for a "reworked directory". By default, reworked change
       scripts live in the deploy, revert, and verify directories along with
       all the other change scripts. But if that starts to get too messy, or
       you simply don't want to see them, add a `reworked_dir` setting to the
       core, engine, or target config and reworked scripts will be stored
       there, instead. Also supported are `reworked_deploy_dir`,
       `reworked_revert_dir`, and `reworked_verify_dir`.
     - Added the `--dir` option to the `init`, `engine`, and `target`
       commands.
     - Copied the core configuration options (`--engine`, `--target`,
       `--plan-file`, `--registry`, etc.) to the `init`, `engine`, and
       `target` commands. This means that they can be specified after the
       command, which is a bit more natural. It also means that the
       `--registry` and `--client` options of the `target` are no longer
       deprecated.
     - The `init` command on longer writes out commented values for the
       `deploy_dir`, `revert_dir`, or `verify_dir` settings. I think these
       settings are not commonly used, and it would start to get crowded if we
       also added their "reworked" variants, which will be used still less.
     - Added the `alter` action to the `engine` and `target` commands to set
       engine and target properties.
     - Added support for setting reworked directories to the `engine` and
       `target` commands.
     - Reformatted the output of the `engine` and `target` command `show`
       actions to include reworked directories, and to bit a bit less flat.
     - Attempting to add or alter an engine with a target URI that connects to
       a different engine now triggers an error. For example, you can't set
       the target for engine `pg` to `db:sqlite:`.
     - The `add` and `alter` actions of the `engine` and `target` commands
       now create script directories if they don't already exist.
     - The `add` action of the `engine` and `target` commands now creates a
       plan file if one does not exist in the specified location for the
       engine or target.
     - Added the `deploy_dir`, `revert_dir`, and `verify_dir` methods to
       App::Sqitch::Plan::Change. Each points to the proper directory for the
       target depending on whether or not the change has been reworked.
     - In the MySQL engine, the following URI query params will be converted
       to options passed to the command-line client, if they're present:
       * mysql_compression=1   => --compress
       * mysql_ssl=1           => --ssl
       * mysql_connect_timeout => --connect_timeout
       * mysql_init_command    => --init-command
       * mysql_socket          => --socket
       * mysql_ssl_client_key  => --ssl-key
       * mysql_ssl_client_cert => --ssl-cert
       * mysql_ssl_ca_file     => --ssl-ca
       * mysql_ssl_ca_path     => --ssl-capath
       * mysql_ssl_cipher      => --ssl-cipher
     [Documentation]
     - Added the "Overworked" section to sqitch-configuration guide with an
       example of how to move reworked change scripts into a `reworked_dir`.
     [Deprecations]
     - Deprecated the `set-*` actions in the `engine` and `target` commands in
       favor of the new `alter` action.
     - The core `--deployed-dir`, `--revert-dir`, and `--verify-dir` options
       are deprecated in favor of the `--dir` option on the `init`, `engine`,
       and `target` command.

0.9992 2015-05-20T23:51:41Z
     - On PostgreSQL, Sqitch now sets the `client_encoding` parameter to
       `UTF8` for its own connection to the database. This ensures that data
       sent to and from the databse should always be properly encoded and
       decoded. Users should still set the proper encodings for change scripts
       as appropriate.
     - Fixed test failures due to path differences on Windows.
     - DateTime::TimeZone is now explicitly required in an attempt to head off
       "Cannot determine local time zone" errors.
     - Corrected some typos and thinkos in `sqitchtutorial-oracle`, thanks to
       George Hartzell.
     - Improved the script to upgrade an Oracle registry to v1.0 to support
       versions prior to Oracle 12, thanks to Timothy Procter.
     - Added missing closing parenthesis to the "Nothing to deploy" message.
       Thanks to George Hartzell for the pull request (Issue #226).
     - Replaced the unique constraint on the `script_hash` column in the
       `changes` registry table with a unique constraint on `project` and
       `script_hash`. This is to allow a deploy script to be used in more than
       one project in a single database. This change increments the registry
       version to v1.1. Thanks to Timothy Procter for the report.
     - Updated the registry check constraints to have consistent names on the
       engines that support them. This will make it easier to modify the
       constraints in the future.
     - Fixed precision issues with the registry version on MySQL and Firebird.
     - Added comment to sqitch-passwords guide that MySQL::Config is required
       to read passwords from the MySQL configuration files. Thanks to
       Sterling Hanenkamp for the patch!

0.9991 2015-04-03T23:14:39Z
     [Improvements]
     - Reduced minimum required MySQL engine from 5.6.4 to 5.1.0. Versions
       prior to 5.6.4 lose the following features:
       * Versions earlier than 5.6.4 is fractional second precision on
         registry `DATETIME` columns. Since the ordering of those timestamps
         is so important to the functioning of Sqitch, it will sleep in 100 ms
         increments between logging changes to the registry until the time has
         ticked over to the next second. Naturally, reverts and deploys will
         be a little slower on versions of MySQL before 5.6.4, but accurate.
       * Versions earlier than 5.5.0 lose the `checkit()` functions, which
         would otherwise be used to emulate CHECK constraints in the registry,
         as well as in user-created verify scripts, as recommended in the
         MySQL tutorial, `sqitchtutorial-mysql`.
     - Added a script to update the `DATETIME` columns in a MySQL Sqitch
       registry that was upgraded to MySQL 5.6.4 or higher. It will be
       installed as `tools/upgrade-registry-to-mysql-5.6.4.sql` in the
       directory returned by `sqitch --etc`.
     - Added a script to add the `checkit()` function and registry triggers to
       emulate CHECK constraints to a MySQL Sqitch registry that was upgraded
       to MySQL 5.5.0 or higher. It will be installed as
       `tools/upgrade-registry-to-mysql-5.5.0.sql` in the directory returned
       by `sqitch --etc`.
     - The `init` command now throws an error when the plan file already
       exists and is invalid or defined for a different project. Thanks to
       Gabriel Potk?ny for the suggestion (Issue #214).
     - All commands that take target arguments can now specify them as engine
       names or plan file paths as well as target names and URIs.
     - Added the `--all` option and the `$command.all` configuration variable
       to the `add`, `rework`, `tag`, and `bundle` commands. This option tells
       the commands to do their thing for all plans known from the
       configuration, not just the default plan.
     - Pass engine, target, or plan file names to the `add`, `rework`, `tag`,
       and `bundle` commands` commands to specify specify one or more targets,
       engines, and plans to act on.
     - Added the `--change` option to the `add`, `rework`, and `tag` commands
       to distinguish the change to be added, reworked, or tagged from
       plan-specifying arguments, if necessary.
     - Added the `--tag` option to the `tag` command to distinguish the tag to
       be added from plan-specifying arguments, if necessary.
     - Changed the short variant of the `--conflicts` option to the `add` and
       `rework` commands from `-c` to `-x`. The `-c` option is now used as the
       short variant for `--change` (and `--conflicts` has almost certainly
       never been used, anyway).
     - Added the `engine` and `project` variables to the execution of script
       templates by the `add` command. The default templates now use it to
       make their first lines one of:
       * -- Deploy [% project %]:[% change %] to [% engine]
       * -- Revert [% project %]:[% change %] from [% engine]
       * -- Verify [% project %]:[% change %] on [% engine]
     [Bug Fixes]
     - DateTime::TimeZone::Local::Win32 is now required on Windows.
     - The MySQL engine no longer passes `--skip-pager` on Windows, since
       it is not supported there. Thanks to Gabriel Potk?ny for the report
       (Issue #213).
     - Fixed "no such table: changes" error when upgrading the SQLite
       registry.
     - Fixed upgrade failure on PostgreSQL 8.4. Thanks to Phillip Smith for
       the report!
     - Fixed an error when the `status` command `show_changes` and `show_tags`
       configuration variables were set. Thanks to Adrian Klaver for the
       report (Issue #219).
     - Fixed `log` and `plan` usage statements to properly spell `--abbrev`.
       Thanks to Adrian Klaver for the report (Issue #220).
     - Fixed the formatting of change notes so that a space precedes the `#`
       character whether the note was added by the `--note` option or via an
       editor.
     - Fixed a bug when parsing plan files with DOS/Windows line endings.
       Thanks to Timothy Procter for the report (Issue #212).
     - Looking up a change and tag in the database (via the `--onto` option to
       `rebase` or the `--to` option to `revert`, among others) would
       sometimes return the incorrect change if the change has been reworked
       two or more times. Thanks to BryLo for the report!
     [Documentation]
     - Updated docs to be consistent in referring to the location of the system
       configuration and template location as `$(prefix)/etc/sqitch`. Also
       added notes pointing to the `--etc-dir` to find out exactly what that
       resolves to. Suggested by Joseph Anthony Pasquale Holsten (Issue #167).
     [Deprecations]
     - Reverted deprecation of the database connection options. Target URIs
       are still generally preferred, but sometimes you want to use a target
       but just change the user name or database name. Retaining the options
       is the easiest way to do this. Plus, a fair number of people have
       scripts that use these options, and it seems petty to break them. Sorry
       for the double-take here! The list of un-deprecated options is:
       * `--db-client`
       * `--db-host`
       * `--db-port`
       * `--db-username`
       * `--db-password`
       * `--db-name`

0.999  2015-02-12T19:43:45Z
     - Improved MySQL missing table error detection by relying on error codes
       instead of matching a (possibly localized) error string.
     - Made the registry upgrade more transparent when deploying. Sqitch is
       now is a little more vigilent in checking for things being out-of-date
       and updating them.
     - Fixed an issue where the `status` command would return an error when
       run against a an older version of the registry.
     - Fixed a Postgres test failure when DBD::Pg is installed but psql is not
       in the path.
     - Now require Config::GitLike 1.15 to build on Windows in order to avoid
       test failures when Cwd::abs_path dies on non-existant paths.
     - Clarified the behavior of each `deploy` reversion mode with regard to
       deploy script vs. verify script failures, and with the expectation that
       deploy scripts are atomic.
     - Target passwords can now be set via a single environment variable,
       `$SQITCH_PASSWORD`. Its value will override URI-specified password.
     - Added the sqitch-passwords and sqitch-environment guides.

0.998  2015-01-15T22:17:44Z
     - Fixed a bug in `sqitch engine update-config` where it would add data to
       config files that did not previously have them, or report that data was
       present in nonexistent config files.
     - Added the `releases` table to the databases. This table will keep track
       of releases of the Sqitch registry schema.
     - The Oracle `registry` variable is now always `DEFINE`d when Oracle
       scripts run.
     - Added the `upgrade` command, which upgrades the schema for the Sqitch
       registry for a target database.
     - Added the `script_hash` column to the `changes` registry table. This
       column contains a SHA-1 hash of the deploy script for the change at the
       time it was deployed. For existing registries, the upgrade script sets
       its value to be the same as the change ID. This value is update the
       next time a project is deployed to the database.
     - The error message when `deploy` cannot find the currently-deployed
       change ID in the plan now includes more contextual information,
       including the change name, associated tags, and the plan file name.
       Suggested by Curtis Poe (Issue #205).
     - Comments on Firebird registry objects are now created with the
       `COMMENT` command, rather than INSERTs into catalog tables.
     - Added support for "merge" events, though none are logged, yet.

diffstat:

 databases/p5-App-Sqitch/Makefile |   5 ++---
 databases/p5-App-Sqitch/distinfo |  10 +++++-----
 2 files changed, 7 insertions(+), 8 deletions(-)

diffs (29 lines):

diff -r 9bc49c70444f -r 8823acc11e24 databases/p5-App-Sqitch/Makefile
--- a/databases/p5-App-Sqitch/Makefile  Thu Jul 28 12:17:03 2016 +0000
+++ b/databases/p5-App-Sqitch/Makefile  Thu Jul 28 12:40:58 2016 +0000
@@ -1,8 +1,7 @@
-# $NetBSD: Makefile,v 1.15 2016/06/08 19:22:23 wiz Exp $
+# $NetBSD: Makefile,v 1.16 2016/07/28 12:40:58 wen Exp $
 
-DISTNAME=              App-Sqitch-0.997
+DISTNAME=              App-Sqitch-0.9995
 PKGNAME=               p5-${DISTNAME}
-PKGREVISION=           2
 CATEGORIES=            databases perl5
 MASTER_SITES=          ${MASTER_SITE_PERL_CPAN:=App/}
 
diff -r 9bc49c70444f -r 8823acc11e24 databases/p5-App-Sqitch/distinfo
--- a/databases/p5-App-Sqitch/distinfo  Thu Jul 28 12:17:03 2016 +0000
+++ b/databases/p5-App-Sqitch/distinfo  Thu Jul 28 12:40:58 2016 +0000
@@ -1,6 +1,6 @@
-$NetBSD: distinfo,v 1.8 2015/11/03 01:56:16 agc Exp $
+$NetBSD: distinfo,v 1.9 2016/07/28 12:40:58 wen Exp $
 
-SHA1 (App-Sqitch-0.997.tar.gz) = ad0f64d99da1bd14ac80c5f8dee48b950021bb30
-RMD160 (App-Sqitch-0.997.tar.gz) = 546b1e37f65cf12af42c95b0d4c1f7becc61976d
-SHA512 (App-Sqitch-0.997.tar.gz) = bce7fb5b12fa445282e23b556b76132692fff97796b9df29e76ce0c679396a996688a130f658955032df50c8a3cc19b162bfd1690ad526278bae8b76a1812059
-Size (App-Sqitch-0.997.tar.gz) = 434119 bytes
+SHA1 (App-Sqitch-0.9995.tar.gz) = 59c2062229b37c91969a2f02597669e2868eaf0e
+RMD160 (App-Sqitch-0.9995.tar.gz) = 0897acf76bda2724bf695eda772b532801c9169f
+SHA512 (App-Sqitch-0.9995.tar.gz) = 15681566b321fc3f7cd0d4aac817bac69cabae4655cdaff862e85dcc80db771adf512ad354f21102e8a760bc8b54d306050c9bfbcca34bf243ab6af7e497b9f3
+Size (App-Sqitch-0.9995.tar.gz) = 476617 bytes



Home | Main Index | Thread Index | Old Index